From: Tony O'Brien <tony.obrien@xxxxxxxxxxxxxxxxxxx> [ Upstream commit 5f8d1e3b6f9b5971f9c06d5846ce00c49e3a8d94 ] Throughout the ADT7475 driver, attributes relating to the temperature sensors are displayed in the order Remote 1, Local, Remote 2. Make temp_st_show() conform to this expectation so that values set by temp_st_store() can be displayed using the correct attribute. Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing") Signed-off-by: Tony O'Brien <tony.obrien@xxxxxxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20230222005228.158661-2-tony.obrien@xxxxxxxxxxxxxxxxxxx Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/hwmon/adt7475.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index 0a87c5b512862..bde5fe10a95a5 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -554,11 +554,11 @@ static ssize_t show_temp_st(struct device *dev, struct device_attribute *attr, val = data->enh_acoustics[0] & 0xf; break; case 1: - val = (data->enh_acoustics[1] >> 4) & 0xf; + val = data->enh_acoustics[1] & 0xf; break; case 2: default: - val = data->enh_acoustics[1] & 0xf; + val = (data->enh_acoustics[1] >> 4) & 0xf; break; } -- 2.39.2