Greetings!
On my GIGABYTE GA-970-Gaming board (AM3+ board + AMD FX8370 CPU) I got this very annoying problem that onboard ethernet Atheros E2400 (alx) ceases to work when the USB 3.0 controller (VIA VL805/806 chipset) is enabled in BIOS.
In this state alx tries to set up the internet connection but fails constantly. dmesg shows this at startup:
[...]
------------[ cut here ]------------
NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out
WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:526 dev_watchdog+0x1a8/0x1b0
Modules linked in: dm_mod input_leds joydev hid_generic usbhid hid snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio evdev led_class radeon snd_hda_codec_hdmi drm_ttm_helper ttm pkcs8_key_parser i2c_algo_bit drm_display_helper sg drm_kms_helper crc32_pclmul snd_hda_intel snd_intel_dspcfg sysimgblt syscopyarea sha512_ssse3 fam15h_power sysfillrect acpi_cpufreq k10temp snd_hda_codec sr_mod it87 sha512_generic aesni_intel libaes crypto_simd cryptd hwmon_vid ohci_pci cdrom hwmon ehci_pci ohci_hcd snd_hwdep i2c_piix4 ehci_hcd snd_hda_core drm xhci_pci snd_pcm xhci_hcd snd_timer drm_panel_orientation_quirks usbcore snd video usb_common wmi soundcore backlight button processor efivarfs
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.3.0-rc2-bdver2 #1
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970-GAMING, BIOS F2 04/06/2016
RIP: 0010:dev_watchdog+0x1a8/0x1b0
Code: ff ff e9 63 ff ff ff c6 05 75 94 83 00 01 4c 89 f7 e8 0c 11 fc ff 48 c7 c7 55 9e b6 9c 4c 89 f6 48 89 c2 89 d9 e8 d8 4d 9e ff <0f> 0b e9 6e ff ff ff 90 41 57 41 56 53 49 89 fe 8b 87 c8 03 00 00
RSP: 0018:ffffb58d0015cea8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 000000007fffffff R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff931b464e1490
R13: dead000000000122 R14: ffff931b464e1000 R15: ffff931b464e13e0
FS: 0000000000000000(0000) GS:ffff93224ecc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007facf21f5140 CR3: 00000001bcbc0000 CR4: 00000000000406e0
Call Trace:
<IRQ>
? dev_init_scheduler+0x80/0x80
? dev_init_scheduler+0x80/0x80
call_timer_fn+0x1d/0xa0
__run_timers+0x178/0x1f0
run_timer_softirq+0x14/0x30
__do_softirq+0xc3/0x1d9
__irq_exit_rcu+0x74/0xa0
sysvec_apic_timer_interrupt+0x6d/0x80
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x16/0x20
RIP: 0010:cpuidle_enter_state+0x119/0x210
Code: fe ff ff e8 d9 d9 90 ff e8 44 f8 ff ff 48 89 c5 31 ff e8 7a 5b 90 ff 45 84 ed 48 8b 5c 24 10 74 05 e8 5b b6 e7 ff fb 45 85 f6 <78> 4e 44 89 f0 48 6b d0 68 48 8b 4c 13 48 48 2b 6c 24 08 49 89 6f
RSP: 0018:ffffb58d000afe88 EFLAGS: 00000202
RAX: 0000000000000000 RBX: ffffffffc02cf0f0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000683d128de R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffffffc02c9e70 R12: 0000000000000002
R13: 0000000000000000 R14: 0000000000000002 R15: ffff931bfece7000
? cleanup_module+0x60/0x60 [processor]
? cpuidle_enter_state+0x106/0x210
cpuidle_enter+0x24/0x40
do_idle+0x130/0x1c0
cpu_startup_entry+0x14/0x20
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xcf/0xdb
</TASK>
---[ end trace 0000000000000000 ]---
alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
[...]
Some data about the system:
# inxi -bZ
System:
Host: outsider Kernel: 6.3.0-rc2-bdver2 arch: x86_64 bits: 64 Desktop: MATE
v: 1.26.0 Distro: Gentoo Base System release 2.13
Machine:
Type: Desktop Mobo: Gigabyte model: 970-GAMING v: x.x serial: N/A
UEFI: American Megatrends v: F2 date: 04/06/2016
CPU:
Info: 8-core AMD FX-8370 [MT MCP] speed (MHz): avg: 1400 min/max: 1400/4000
Graphics:
Device-1: AMD Turks XT [Radeon HD 6670/7670] driver: radeon v: kernel
Display: x11 server: X.Org v: 21.1.7 driver: X: loaded: modesetting
unloaded: fbdev,radeon gpu: radeon resolution: 1920x1080~60Hz
OpenGL: renderer: AMD TURKS (DRM 2.50.0 / 6.3.0-rc2-bdver2 LLVM 15.0.7)
v: 4.5 Mesa 22.3.7
Network:
Device-1: Qualcomm Atheros Killer E2400 Gigabit Ethernet driver: alx
# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02)
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 2)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series]
02:00.0 USB controller: ASMedia Technology Inc. ASM2142/ASM3142 USB 3.1 Host Controller
03:00.0 Non-Volatile memory controller: Sandisk Corp WD Blue SN550 NVMe SSD (rev 01)
05:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
06:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller (rev 01)
# lspci -s 06:00.0 -vv
06:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd VL805/806 xHCI USB 3.0 Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
IOMMU group: 12
Region 0: Memory at fe600000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c4] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM not supported
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis+
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 14, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 06010000 0000000f 04000001
Kernel modules: xhci_pci
# lspci -s 05:00.0 -vv
05:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
Subsystem: Gigabyte Technology Co., Ltd Killer E2400 Gigabit Ethernet Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 12
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at d000 [size=128]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset- SlotPowerLimit 0W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr+ FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [c0] MSI: Enable- Count=1/16 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [d8] MSI-X: Enable+ Count=16 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 14, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 04000001 0000010f 05010000 00000000
Capabilities: [180 v1] Device Serial Number ff-93-c2-07-1c-1b-0d-ff
Kernel driver in use: alx
With the VIA VL805/806 USB-Controller disabled in BIOS I don't get this problem, everything works fine. But this way I loose front USB 3 ports... The other ASMedia USB 3.1 controller works fine without hampering the system.
Don't know whether this is a regression - the problem shows up on current kernel 6.2.x or 6.1.x TLS too. Kernel dmesg + .config attached.
Regards,
Erhard
Attachment:
config_63-rc2_bdver2
Description: Binary data
[ 0.000000] Linux version 6.3.0-rc2-bdver2 (root@outsider) (clang version 15.0.7, LLD 15.0.7) #1 SMP Sat Mar 18 19:41:03 CET 2023 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc2-bdver2 root=/dev/nvme0n1p7 ro psmouse.synaptics_intertouch=1 zswap.max_pool_percent=16 zswap.zpool=z3fold slub_debug=FZP page_poison=1 netconsole=6666@10.0.0.14/eth0,6666@10.0.0.3/70:85:C2:30:EC:01 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce1fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ce1ff000-0x00000000ce240fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ce241000-0x00000000ce250fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ce251000-0x00000000ce640fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ce641000-0x00000000cf0f1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf0f2000-0x00000000cf155fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000cf156000-0x00000000cf156fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf157000-0x00000000cf35cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf35d000-0x00000000cf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000082effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.3.1 by American Megatrends [ 0.000000] efi: ACPI=0xce249000 ACPI 2.0=0xce249000 SMBIOS=0xf04c0 [ 0.000000] efi: Remove mem44: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map [ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved [ 0.000000] efi: Not removing mem45: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem46: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem47: MMIO range=[0xfec20000-0xfec20fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem48: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem49: MMIO range=[0xfed61000-0xfed70fff] (64KB) from e820 map [ 0.000000] efi: Not removing mem50: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map [ 0.000000] efi: Remove mem51: MMIO range=[0xfef00000-0xffffffff] (17MB) from e820 map [ 0.000000] e820: remove [mem 0xfef00000-0xffffffff] reserved [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970-GAMING, BIOS F2 04/06/2016 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4018.385 MHz processor [ 0.001025] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001048] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001071] last_pfn = 0x82f000 max_arch_pfn = 0x400000000 [ 0.001089] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001747] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved [ 0.001755] last_pfn = 0xcf800 max_arch_pfn = 0x400000000 [ 0.001772] Using GB pages for direct mapping [ 0.002617] Secure boot disabled [ 0.002619] ACPI: Early table checksum verification disabled [ 0.002622] ACPI: RSDP 0x00000000CE249000 000024 (v02 ALASKA) [ 0.002626] ACPI: XSDT 0x00000000CE249070 00005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.002631] ACPI: FACP 0x00000000CE24E998 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.002636] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-615) [ 0.002640] ACPI: DSDT 0x00000000CE249158 005839 (v02 ALASKA A M I 00000088 INTL 20051117) [ 0.002643] ACPI: FACS 0x00000000CE63BF80 000040 [ 0.002646] ACPI: APIC 0x00000000CE24EA90 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.002649] ACPI: FPDT 0x00000000CE24EB30 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.002651] ACPI: MCFG 0x00000000CE24EB78 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.002654] ACPI: HPET 0x00000000CE24EBB8 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.002657] ACPI: SSDT 0x00000000CE24EBF0 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.002659] ACPI: IVRS 0x00000000CE250308 0000D0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.002662] ACPI: Reserving FACP table memory at [mem 0xce24e998-0xce24ea8b] [ 0.002663] ACPI: Reserving DSDT table memory at [mem 0xce249158-0xce24e990] [ 0.002664] ACPI: Reserving FACS table memory at [mem 0xce63bf80-0xce63bfbf] [ 0.002665] ACPI: Reserving APIC table memory at [mem 0xce24ea90-0xce24eb2d] [ 0.002666] ACPI: Reserving FPDT table memory at [mem 0xce24eb30-0xce24eb73] [ 0.002667] ACPI: Reserving MCFG table memory at [mem 0xce24eb78-0xce24ebb3] [ 0.002668] ACPI: Reserving HPET table memory at [mem 0xce24ebb8-0xce24ebef] [ 0.002669] ACPI: Reserving SSDT table memory at [mem 0xce24ebf0-0xce250303] [ 0.002670] ACPI: Reserving IVRS table memory at [mem 0xce250308-0xce2503d7] [ 0.002714] Zone ranges: [ 0.002714] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.002716] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.002718] Normal [mem 0x0000000100000000-0x000000082effffff] [ 0.002719] Movable zone start for each node [ 0.002720] Early memory node ranges [ 0.002721] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.002722] node 0: [mem 0x0000000000100000-0x00000000ce1fefff] [ 0.002723] node 0: [mem 0x00000000cf156000-0x00000000cf156fff] [ 0.002724] node 0: [mem 0x00000000cf35d000-0x00000000cf7fffff] [ 0.002725] node 0: [mem 0x0000000100001000-0x000000082effffff] [ 0.002729] Initmem setup node 0 [mem 0x0000000000001000-0x000000082effffff] [ 0.002735] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.002776] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.003333] On node 0, zone DMA32: 3927 pages in unavailable ranges [ 0.003333] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.003333] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.003333] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.003333] ACPI: PM-Timer IO Port: 0x808 [ 0.003333] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.003333] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.003333] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.003333] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.003333] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.003333] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.003333] [mem 0xcf800000-0xfebfffff] available for PCI devices [ 0.003333] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.003333] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.003333] percpu: Embedded 41 pages/cpu s128760 r8192 d30984 u262144 [ 0.003333] pcpu-alloc: s128760 r8192 d30984 u262144 alloc=1*2097152 [ 0.003333] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.003333] Built 1 zonelists, mobility grouping on. Total pages: 8246855 [ 0.003333] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc2-bdver2 root=/dev/nvme0n1p7 ro psmouse.synaptics_intertouch=1 zswap.max_pool_percent=16 zswap.zpool=z3fold slub_debug=FZP page_poison=1 netconsole=6666@10.0.0.14/eth0,6666@10.0.0.3/70:85:C2:30:EC:01 [ 0.003333] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc2-bdver2", will be passed to user space. [ 0.003333] printk: log_buf_len individual max cpu contribution: 8192 bytes [ 0.003333] printk: log_buf_len total cpu_extra contributions: 57344 bytes [ 0.003333] printk: log_buf_len min size: 65536 bytes [ 0.003333] printk: log_buf_len: 131072 bytes [ 0.003333] printk: early log buf free: 57032(87%) [ 0.003333] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.003333] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.003333] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off [ 0.003333] software IO TLB: area num 8. [ 0.003333] Memory: 3395652K/33511684K available (10240K kernel code, 631K rwdata, 2388K rodata, 1060K init, 1540K bss, 846564K reserved, 0K cma-reserved) [ 0.003333] ********************************************************** [ 0.003333] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.003333] ** ** [ 0.003333] ** This system shows unhashed kernel memory addresses ** [ 0.003333] ** via the console, logs, and other interfaces. This ** [ 0.003333] ** might reduce the security of your system. ** [ 0.003333] ** ** [ 0.003333] ** If you see this message and you are not debugging ** [ 0.003333] ** the kernel, report this immediately to your system ** [ 0.003333] ** administrator! ** [ 0.003333] ** ** [ 0.003333] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.003333] ********************************************************** [ 0.003333] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.003333] rcu: Hierarchical RCU implementation. [ 0.003333] Tracing variant of Tasks RCU enabled. [ 0.003333] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.003333] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 16 [ 0.003333] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.003333] kfence: initialized - using 2097152 bytes for 255 objects at 0xffff93224ba00000-0xffff93224bc00000 [ 0.003333] Console: colour dummy device 80x25 [ 0.003333] printk: console [tty0] enabled [ 0.003333] ACPI: Core revision 20221020 [ 0.003333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.003333] APIC: Switch to symmetric I/O mode setup [ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.003333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39ec3471d7b, max_idle_ns: 440795317545 ns [ 0.641331] Calibrating delay loop (skipped), value calculated using timer frequency.. 8039.63 BogoMIPS (lpj=13394616) [ 0.641336] pid_max: default: 32768 minimum: 301 [ 0.677861] LSM: initializing lsm=capability,yama [ 0.677874] Yama: becoming mindful. [ 0.678093] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.678231] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.678670] LVT offset 1 assigned for vector 0xf9 [ 0.678678] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.678681] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.678688] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.678693] Spectre V2 : Mitigation: Retpolines [ 0.678695] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.678698] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.678700] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.678703] RETBleed: Mitigation: untrained return thunk [ 0.678707] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.678711] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.682255] Freeing SMP alternatives memory: 32K [ 0.789205] smpboot: CPU0: AMD FX-8370 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) [ 0.789450] cblist_init_generic: Setting adjustable number of callback queues. [ 0.789455] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.789483] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.789505] ... version: 0 [ 0.789507] ... bit width: 48 [ 0.789509] ... generic registers: 6 [ 0.789511] ... value mask: 0000ffffffffffff [ 0.789513] ... max period: 00007fffffffffff [ 0.789516] ... fixed-purpose events: 0 [ 0.789518] ... event mask: 000000000000003f [ 0.789612] rcu: Hierarchical SRCU implementation. [ 0.789614] rcu: Max phase no-delay instances is 1000. [ 0.789685] MCE: In-kernel MCE decoding enabled. [ 0.789762] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.789912] smp: Bringing up secondary CPUs ... [ 0.790066] x86: Booting SMP configuration: [ 0.790068] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.853404] smp: Brought up 1 node, 8 CPUs [ 0.853404] smpboot: Max logical packages: 1 [ 0.853404] smpboot: Total of 8 processors activated (64319.08 BogoMIPS) [ 4.453922] node 0 deferred pages initialised in 3597ms [ 4.470964] allocated 67108864 bytes of page_ext [ 4.471407] devtmpfs: initialized [ 4.471601] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 4.471601] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 4.471720] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 4.472091] thermal_sys: Registered thermal governor 'step_wise' [ 4.472092] thermal_sys: Registered thermal governor 'user_space' [ 4.472112] cpuidle: using governor menu [ 4.472135] PCI: Using configuration type 1 for base access [ 4.472135] PCI: Using configuration type 1 for extended access [ 4.472135] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 4.472135] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 4.472135] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 4.472135] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 4.527997] raid6: sse2x4 gen() 9811 MB/s [ 4.584664] raid6: sse2x2 gen() 8376 MB/s [ 4.641333] raid6: sse2x1 gen() 6910 MB/s [ 4.641336] raid6: using algorithm sse2x4 gen() 9811 MB/s [ 4.698000] raid6: .... xor() 3970 MB/s, rmw enabled [ 4.698003] raid6: using ssse3x2 recovery algorithm [ 4.698161] ACPI: Added _OSI(Module Device) [ 4.698164] ACPI: Added _OSI(Processor Device) [ 4.698166] ACPI: Added _OSI(3.0 _SCP Extensions) [ 4.698169] ACPI: Added _OSI(Processor Aggregator Device) [ 4.710736] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 4.713541] ACPI: Interpreter enabled [ 4.713552] ACPI: PM: (supports S0 S5) [ 4.713555] ACPI: Using IOAPIC for interrupt routing [ 4.713867] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.713871] PCI: Using E820 reservations for host bridge windows [ 4.714390] ACPI: Enabled 10 GPEs in block 00 to 1F [ 4.729747] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.729757] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 4.729770] acpi PNP0A08:00: _OSC: OS requested [PME AER PCIeCapability LTR] [ 4.729774] acpi PNP0A08:00: _OSC: platform willing to grant [PME AER PCIeCapability LTR] [ 4.729778] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 4.730258] PCI host bridge to bus 0000:00 [ 4.730262] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 4.730266] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 4.730270] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 4.730274] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 4.730277] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 4.730281] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window] [ 4.730285] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.730316] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 4.730463] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 4.730613] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 4.730633] pci 0000:00:02.0: enabling Extended Tags [ 4.730662] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 4.730784] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 4.730803] pci 0000:00:04.0: enabling Extended Tags [ 4.730830] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 4.730956] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 4.730974] pci 0000:00:06.0: enabling Extended Tags [ 4.731002] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 4.731132] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 4.731147] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 4.731156] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 4.731165] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 4.731174] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 4.731182] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 4.731191] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] [ 4.731350] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 4.731364] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] [ 4.731512] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 4.731526] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] [ 4.731590] pci 0000:00:12.2: supports D1 D2 [ 4.731593] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 4.731751] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 4.731766] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] [ 4.731914] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 4.731929] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] [ 4.731993] pci 0000:00:13.2: supports D1 D2 [ 4.731995] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 4.732120] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 4.732275] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 4.732292] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 4.732347] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 4.732462] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 4.732634] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 4.732786] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 4.732800] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] [ 4.732979] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 4.733010] pci 0000:00:15.0: enabling Extended Tags [ 4.733050] pci 0000:00:15.0: supports D1 D2 [ 4.733182] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 4.733213] pci 0000:00:15.1: enabling Extended Tags [ 4.733253] pci 0000:00:15.1: supports D1 D2 [ 4.733377] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 4.733392] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] [ 4.733553] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 4.733567] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] [ 4.733631] pci 0000:00:16.2: supports D1 D2 [ 4.733634] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 4.733738] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 4.733817] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 4.733887] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 4.733962] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 4.734035] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 4.734110] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 4.734224] pci 0000:01:00.0: [1002:6758] type 00 class 0x030000 [ 4.734242] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 4.734255] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit] [ 4.734264] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 4.734278] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref] [ 4.734286] pci 0000:01:00.0: enabling Extended Tags [ 4.734307] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 4.734343] pci 0000:01:00.0: supports D1 D2 [ 4.734459] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300 [ 4.734477] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit] [ 4.734512] pci 0000:01:00.1: enabling Extended Tags [ 4.734561] pci 0000:01:00.1: supports D1 D2 [ 4.734667] pci 0000:00:02.0: PCI bridge to [bus 01] [ 4.734672] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 4.734681] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 4.734685] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 4.734737] pci 0000:02:00.0: [1b21:2142] type 00 class 0x0c0330 [ 4.734755] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit] [ 4.734793] pci 0000:02:00.0: enabling Extended Tags [ 4.734852] pci 0000:02:00.0: PME# supported from D0 [ 4.734883] pci 0000:02:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:04.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link) [ 4.734977] pci 0000:00:04.0: PCI bridge to [bus 02] [ 4.734983] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 4.735044] pci 0000:03:00.0: [15b7:5009] type 00 class 0x010802 [ 4.735063] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe803fff 64bit] [ 4.735086] pci 0000:03:00.0: reg 0x20: [mem 0xfe804000-0xfe8040ff 64bit] [ 4.735206] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:06.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 4.735326] pci 0000:00:06.0: PCI bridge to [bus 03] [ 4.735332] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 4.735345] pci_bus 0000:04: extended config space not accessible [ 4.735408] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 4.735417] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 4.735421] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 4.735425] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 4.735429] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 4.735433] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 4.735437] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode) [ 4.735502] pci 0000:05:00.0: [1969:e0a1] type 00 class 0x020000 [ 4.735528] pci 0000:05:00.0: reg 0x10: [mem 0xfe700000-0xfe73ffff 64bit] [ 4.735541] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd07f] [ 4.735600] pci 0000:05:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 4.735659] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.735790] pci 0000:00:15.0: PCI bridge to [bus 05] [ 4.735796] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff] [ 4.735801] pci 0000:00:15.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 4.735868] pci 0000:06:00.0: [1106:3483] type 00 class 0x0c0330 [ 4.735889] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe600fff 64bit] [ 4.735980] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.736070] pci 0000:00:15.1: PCI bridge to [bus 06] [ 4.736078] pci 0000:00:15.1: bridge window [mem 0xfe600000-0xfe6fffff] [ 4.736104] pci_bus 0000:00: on NUMA node 0 [ 4.736990] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 4.737151] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 4.737317] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 4.737482] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 4.737623] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 4.737735] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 4.737847] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 4.737965] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 4.738215] iommu: Default domain type: Translated [ 4.738219] iommu: DMA domain TLB invalidation policy: lazy mode [ 4.738386] SCSI subsystem initialized [ 4.738416] libata version 3.00 loaded. [ 4.738453] EDAC MC: Ver: 3.0.0 [ 4.738562] efivars: Registered efivars operations [ 4.738562] PCI: Using ACPI for IRQ routing [ 4.738562] PCI: pci_cache_line_size set to 64 bytes [ 4.738562] e820: reserve RAM buffer [mem 0xce1ff000-0xcfffffff] [ 4.738562] e820: reserve RAM buffer [mem 0xcf157000-0xcfffffff] [ 4.738562] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff] [ 4.738562] e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff] [ 4.738562] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 4.738562] pci 0000:01:00.0: vgaarb: bridge control possible [ 4.738562] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 4.738562] vgaarb: loaded [ 4.738562] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 4.738562] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 4.741427] clocksource: Switched to clocksource tsc-early [ 4.741722] pnp: PnP ACPI init [ 4.741886] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 4.742459] system 00:01: [io 0x040b] has been reserved [ 4.742464] system 00:01: [io 0x04d6] has been reserved [ 4.742468] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 4.742472] system 00:01: [io 0x0c14] has been reserved [ 4.742476] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 4.742480] system 00:01: [io 0x0c52] has been reserved [ 4.742489] system 00:01: [io 0x0c6c] has been reserved [ 4.742495] system 00:01: [io 0x0c6f] has been reserved [ 4.742505] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 4.742513] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 4.742519] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 4.742525] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 4.742531] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 4.742538] system 00:01: [io 0x0800-0x089f] has been reserved [ 4.742544] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 4.742549] system 00:01: [io 0x0900-0x090f] has been reserved [ 4.742553] system 00:01: [io 0x0910-0x091f] has been reserved [ 4.742557] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 4.742568] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 4.742574] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 4.742578] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 4.742583] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 4.742588] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 4.742593] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved [ 4.742597] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved [ 4.742945] system 00:02: [io 0x0220-0x0227] has been reserved [ 4.742950] system 00:02: [io 0x0228-0x0237] has been reserved [ 4.742954] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 4.743474] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 4.743738] system 00:06: [mem 0xfeb20000-0xfeb23fff] has been reserved [ 4.743968] system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved [ 4.744240] pnp: PnP ACPI: found 8 devices [ 4.751723] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 4.751782] NET: Registered PF_INET protocol family [ 4.752362] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 4.755545] tcp_listen_portaddr_hash hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 4.755648] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 4.756056] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 4.757047] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear) [ 4.757991] TCP: Hash tables configured (established 262144 bind 65536) [ 4.758524] UDP hash table entries: 16384 (order: 8, 1572864 bytes, linear) [ 4.759084] UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes, linear) [ 4.759295] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 4.759334] pci 0000:00:02.0: PCI bridge to [bus 01] [ 4.759339] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 4.759344] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 4.759348] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 4.759354] pci 0000:00:04.0: PCI bridge to [bus 02] [ 4.759358] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 4.759363] pci 0000:00:06.0: PCI bridge to [bus 03] [ 4.759367] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 4.759372] pci 0000:00:14.4: PCI bridge to [bus 04] [ 4.759382] pci 0000:00:15.0: PCI bridge to [bus 05] [ 4.759386] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff] [ 4.759391] pci 0000:00:15.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 4.759398] pci 0000:00:15.1: PCI bridge to [bus 06] [ 4.759402] pci 0000:00:15.1: bridge window [mem 0xfe600000-0xfe6fffff] [ 4.759410] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 4.759414] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 4.759417] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 4.759421] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 4.759424] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 4.759427] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xffffffff window] [ 4.759431] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 4.759434] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 4.759437] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 4.759440] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 4.759444] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 4.759447] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window] [ 4.759450] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window] [ 4.759453] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window] [ 4.759456] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window] [ 4.759459] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000dffff window] [ 4.759462] pci_bus 0000:04: resource 9 [mem 0xd0000000-0xffffffff window] [ 4.759466] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 4.759469] pci_bus 0000:05: resource 1 [mem 0xfe700000-0xfe7fffff] [ 4.759472] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff] [ 4.761471] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 4.761480] pci 0000:02:00.0: PME# does not work under D0, disabling it [ 4.762013] PCI: CLS 64 bytes, default 64 [ 4.762094] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0 [ 4.763273] pci 0000:00:00.0: Adding to iommu group 0 [ 4.763299] pci 0000:00:02.0: Adding to iommu group 1 [ 4.763323] pci 0000:00:04.0: Adding to iommu group 2 [ 4.763342] pci 0000:00:06.0: Adding to iommu group 3 [ 4.763362] pci 0000:00:11.0: Adding to iommu group 4 [ 4.763394] pci 0000:00:12.0: Adding to iommu group 5 [ 4.763416] pci 0000:00:12.2: Adding to iommu group 5 [ 4.763448] pci 0000:00:13.0: Adding to iommu group 6 [ 4.763465] pci 0000:00:13.2: Adding to iommu group 6 [ 4.763485] pci 0000:00:14.0: Adding to iommu group 7 [ 4.763509] pci 0000:00:14.2: Adding to iommu group 8 [ 4.763529] pci 0000:00:14.3: Adding to iommu group 9 [ 4.763555] pci 0000:00:14.4: Adding to iommu group 10 [ 4.763585] pci 0000:00:14.5: Adding to iommu group 11 [ 4.763629] pci 0000:00:15.0: Adding to iommu group 12 [ 4.763648] pci 0000:00:15.1: Adding to iommu group 12 [ 4.763685] pci 0000:00:16.0: Adding to iommu group 13 [ 4.763704] pci 0000:00:16.2: Adding to iommu group 13 [ 4.763742] pci 0000:01:00.0: Adding to iommu group 14 [ 4.763769] pci 0000:01:00.1: Adding to iommu group 14 [ 4.763790] pci 0000:02:00.0: Adding to iommu group 15 [ 4.763814] pci 0000:03:00.0: Adding to iommu group 16 [ 4.763823] pci 0000:05:00.0: Adding to iommu group 12 [ 4.763832] pci 0000:06:00.0: Adding to iommu group 12 [ 4.770562] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 4.770687] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.770691] software IO TLB: mapped [mem 0x00000000bf06e000-0x00000000c306e000] (64MB) [ 4.770740] LVT offset 0 assigned for vector 0x400 [ 4.770822] perf: AMD IBS detected (0x000000ff) [ 4.771382] Initialise system trusted keyrings [ 4.771446] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 4.771882] NET: Registered PF_ALG protocol family [ 4.771886] xor: automatically using best checksumming function avx [ 4.771890] Key type asymmetric registered [ 4.771893] Asymmetric key parser 'x509' registered [ 4.773285] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 4.773339] io scheduler kyber registered [ 4.775815] IPMI message handler: version 39.2 [ 4.777252] ahci 0000:00:11.0: version 3.0 [ 4.777359] nvme nvme0: pci function 0000:03:00.0 [ 4.777453] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 4.777461] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs [ 4.777895] scsi host0: ahci [ 4.778105] scsi host1: ahci [ 4.778200] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 4.778204] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 4.788660] alx 0000:05:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:1b:0d:93:c2:07] [ 4.788700] rtc_cmos 00:03: RTC can wake from S4 [ 4.788923] rtc_cmos 00:03: registered as rtc0 [ 4.788964] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.789039] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes [ 4.789043] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=1024x768x32, linelength=4096 [ 4.791231] Console: switching to colour frame buffer device 128x48 [ 4.792591] nvme nvme0: allocated 32 MiB host memory buffer. [ 4.793315] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 4.793487] NET: Registered PF_INET6 protocol family [ 4.793710] nvme nvme0: 8/0/0 default/read/poll queues [ 4.794036] Segment Routing with IPv6 [ 4.794068] In-situ OAM (IOAM) with IPv6 [ 4.794129] NET: Registered PF_PACKET protocol family [ 4.794929] microcode: microcode updated early to new patch_level=0x06000852 [ 4.795006] microcode: CPU1: patch_level=0x06000852 [ 4.795008] microcode: CPU3: patch_level=0x06000852 [ 4.795008] microcode: CPU2: patch_level=0x06000852 [ 4.795011] microcode: CPU0: patch_level=0x06000852 [ 4.795011] microcode: CPU5: patch_level=0x06000852 [ 4.795080] microcode: CPU4: patch_level=0x06000852 [ 4.795123] microcode: CPU6: patch_level=0x06000852 [ 4.795123] microcode: CPU7: patch_level=0x06000852 [ 4.795202] microcode: Microcode Update Driver: v2.2. [ 4.795208] IPI shorthand broadcast: enabled [ 4.798257] sched_clock: Marking stable (4176668860, 621330127)->(4810079392, -12080405) [ 4.798440] registered taskstats version 1 [ 4.798689] Loading compiled-in X.509 certificates [ 4.798874] nvme0n1: p1 p2 p3 p4 p5 p6 p7 [ 4.804554] zswap: loaded using pool zstd/z3fold [ 4.809523] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers [ 5.090850] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.091730] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.093292] ata1.00: ATA-9: HP SSD S700 Pro 1TB, R0201B, max UDMA/100 [ 5.094128] ata1.00: 2000409264 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.094952] ata2.00: ATAPI: PIONEER BD-RW BDR-208D, 1.50, max UDMA/100 [ 5.096045] ata1.00: Features: Dev-Sleep [ 5.097302] ata1.00: configured for UDMA/100 [ 5.098319] scsi 0:0:0:0: Direct-Access ATA HP SSD S700 Pro 1B PQ: 0 ANSI: 5 [ 5.099172] ata2.00: configured for UDMA/100 [ 5.099679] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB) [ 5.100784] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 5.101602] sd 0:0:0:0: [sda] Write Protect is off [ 5.102368] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.102383] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.103192] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 5.105661] sda: sda1 [ 5.106541] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.110746] scsi 1:0:0:0: CD-ROM PIONEER BD-RW BDR-208D 1.50 PQ: 0 ANSI: 5 [ 5.194200] Btrfs loaded, crc32c=crc32c-intel, zoned=no, fsverity=no [ 5.376087] netpoll: netconsole: local port 6666 [ 5.376856] netpoll: netconsole: local IPv4 address 10.0.0.14 [ 5.377638] netpoll: netconsole: interface 'eth0' [ 5.378405] netpoll: netconsole: remote port 6666 [ 5.379123] netpoll: netconsole: remote IPv4 address 10.0.0.3 [ 5.379859] netpoll: netconsole: remote ethernet address 70:85:c2:30:ec:01 [ 5.380568] netpoll: netconsole: device eth0 not up yet, forcing it [ 5.794671] tsc: Refined TSC clocksource calibration: 4018.622 MHz [ 5.795405] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39ed1412859, max_idle_ns: 440795304727 ns [ 5.796198] clocksource: Switched to clocksource tsc [ 6.217448] alx 0000:05:00.0 eth0: NIC Up: 100 Mbps Full [ 6.218422] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.224795] printk: console [netcon0] enabled [ 6.230609] netconsole: network logging started [ 6.232453] BTRFS: device label zen3_musl devid 1 transid 97815 /dev/root scanned by swapper/0 (1) [ 6.233430] BTRFS info (device nvme0n1p7): using xxhash64 (xxhash64-generic) checksum algorithm [ 6.234229] BTRFS info (device nvme0n1p7): using free space tree [ 6.240287] BTRFS info (device nvme0n1p7): enabling ssd optimizations [ 6.241123] BTRFS info (device nvme0n1p7): auto enabling async discard [ 6.242708] VFS: Mounted root (btrfs filesystem) readonly on device 0:16. [ 6.244081] devtmpfs: mounted [ 6.245276] Freeing unused kernel image (initmem) memory: 1060K [ 6.258022] Write protecting the kernel read-only data: 14336k [ 6.259410] Freeing unused kernel image (rodata/data gap) memory: 1708K [ 6.262536] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 6.263413] rodata_test: all tests were successful [ 6.264285] kallsyms_selftest: start [ 6.264289] Run /sbin/init as init process [ 6.265993] with arguments: [ 6.265994] /sbin/init [ 6.265996] with environment: [ 6.265999] HOME=/ [ 6.266000] TERM=linux [ 6.266001] BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc2-bdver2 [ 7.747423] kallsyms_selftest: --------------------------------------------------------- [ 7.748193] kallsyms_selftest: | nr_symbols | compressed size | original size | ratio(%) | [ 7.748965] kallsyms_selftest: |---------------------------------------------------------| [ 7.749732] kallsyms_selftest: | 34964 | 380879 | 655481 | 58.10 | [ 7.750473] kallsyms_selftest: --------------------------------------------------------- [ 7.990395] kallsyms_selftest: kallsyms_lookup_name() looked up 34964 symbols [ 7.990399] kallsyms_selftest: The time spent on each symbol is (ns): min=1375, max=24683, avg=6685 [ 7.994113] kallsyms_selftest: kallsyms_on_each_symbol() traverse all: 3711247 ns [ 7.994121] kallsyms_selftest: kallsyms_on_each_match_symbol() traverse all: 6796 ns [ 7.994123] kallsyms_selftest: finish [ 8.061071] ACPI: \_PR_.P001: Found 2 idle states [ 8.061889] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 8.061896] ACPI: button: Power Button [PWRB] [ 8.062021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 8.062025] ACPI: button: Power Button [PWRF] [ 8.065525] ACPI: \_PR_.P002: Found 2 idle states [ 8.073633] ACPI: \_PR_.P003: Found 2 idle states [ 8.082984] ACPI: \_PR_.P004: Found 2 idle states [ 8.085740] ACPI: \_PR_.P005: Found 2 idle states [ 8.087809] ACPI: bus type USB registered [ 8.087890] usbcore: registered new interface driver usbfs [ 8.088304] usbcore: registered new interface driver hub [ 8.088358] usbcore: registered new device driver usb [ 8.090439] ACPI: \_PR_.P006: Found 2 idle states [ 8.094895] ACPI: \_PR_.P007: Found 2 idle states [ 8.100025] ACPI: \_PR_.P008: Found 2 idle states [ 8.103862] QUIRK: Enable AMD PLL fix [ 8.103888] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 8.103905] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 1 [ 8.103965] xhci_hcd 0000:06:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0xce210880 flags=0x0000] [ 8.105396] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 8.105610] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 8.115626] ACPI: bus type drm_connector registered [ 8.121398] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 8.121415] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 8.131697] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 8.146949] alx 0000:05:00.0 enp5s0: renamed from eth0 (while UP) [ 8.153649] BTRFS: device label ubuntu devid 1 transid 841 /dev/nvme0n1p3 scanned by (udev-worker) (695) [ 8.159061] BTRFS: device label bdver2_musl devid 1 transid 94829 /dev/nvme0n1p4 scanned by (udev-worker) (696) [ 8.159338] BTRFS: device label bisect_x86-64-v2 devid 1 transid 34250 /dev/nvme0n1p5 scanned by (udev-worker) (701) [ 8.160668] xhci_hcd 0000:02:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010 [ 8.161253] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 8.161270] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 8.161279] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 8.161416] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 8.161420] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.161423] usb usb2: Product: xHCI Host Controller [ 8.161425] usb usb2: Manufacturer: Linux 6.3.0-rc2-bdver2 xhci-hcd [ 8.161428] usb usb2: SerialNumber: 0000:02:00.0 [ 8.161786] hub 2-0:1.0: USB hub found [ 8.161805] hub 2-0:1.0: 2 ports detected [ 8.162109] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.162199] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 8.162203] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.162207] usb usb3: Product: xHCI Host Controller [ 8.162210] usb usb3: Manufacturer: Linux 6.3.0-rc2-bdver2 xhci-hcd [ 8.162214] usb usb3: SerialNumber: 0000:02:00.0 [ 8.162493] hub 3-0:1.0: USB hub found [ 8.162512] hub 3-0:1.0: 2 ports detected [ 8.166210] BTRFS: device label distfiles devid 1 transid 1377 /dev/nvme0n1p6 scanned by (udev-worker) (690) [ 8.169260] cryptd: max_cpu_qlen set to 1000 [ 8.170488] BTRFS info: devid 1 device path /dev/root changed to /dev/nvme0n1p7 scanned by (udev-worker) (705) [ 8.177531] AVX version of gcm_enc/dec engaged. [ 8.177577] AES CTR mode by8 optimization enabled [ 8.288964] alx 0000:05:00.0 enp5s0: fatal interrupt 0x200, resetting [ 8.294234] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full [ 18.103930] xhci_hcd 0000:06:00.0: can't setup: -110 [ 18.103944] xhci_hcd 0000:06:00.0: USB bus 1 deregistered [ 18.104050] ehci-pci 0000:00:13.2: EHCI Host Controller [ 18.104065] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 18.104077] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 18.104085] ehci-pci 0000:00:13.2: debug port 1 [ 18.104114] xhci_hcd 0000:06:00.0: init 0000:06:00.0 fail, -110 [ 18.104117] xhci_hcd: probe of 0000:06:00.0 failed with error -110 [ 18.104164] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 18.118253] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 18.118397] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 18.118402] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.118404] usb usb1: Product: EHCI Host Controller [ 18.118406] usb usb1: Manufacturer: Linux 6.3.0-rc2-bdver2 ehci_hcd [ 18.118408] usb usb1: SerialNumber: 0000:00:13.2 [ 18.118641] hub 1-0:1.0: USB hub found [ 18.118658] hub 1-0:1.0: 5 ports detected [ 18.118975] ehci-pci 0000:00:12.2: EHCI Host Controller [ 18.118986] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4 [ 18.118997] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 18.119006] ehci-pci 0000:00:12.2: debug port 1 [ 18.119063] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 18.134735] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 18.134855] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 18.134860] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.134862] usb usb4: Product: EHCI Host Controller [ 18.134864] usb usb4: Manufacturer: Linux 6.3.0-rc2-bdver2 ehci_hcd [ 18.134866] usb usb4: SerialNumber: 0000:00:12.2 [ 18.135086] hub 4-0:1.0: USB hub found [ 18.135105] hub 4-0:1.0: 5 ports detected [ 18.135470] ehci-pci 0000:00:16.2: EHCI Host Controller [ 18.135485] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 18.135494] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 18.135504] ehci-pci 0000:00:16.2: debug port 1 [ 18.135557] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 18.148064] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 18.148177] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 18.148182] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.148185] usb usb5: Product: EHCI Host Controller [ 18.148187] usb usb5: Manufacturer: Linux 6.3.0-rc2-bdver2 ehci_hcd [ 18.148188] usb usb5: SerialNumber: 0000:00:16.2 [ 18.148401] hub 5-0:1.0: USB hub found [ 18.148423] hub 5-0:1.0: 4 ports detected [ 18.148704] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 18.148713] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 18.148764] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 18.151198] it87: Found IT8620E chip at 0x228, revision 4 [ 18.151223] it87: Beeping is supported [ 18.153155] acpi_cpufreq: overriding BIOS provided _PSD data [ 18.165316] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 18.165926] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 18.174551] Asymmetric key parser 'pkcs8' registered [ 18.212176] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03 [ 18.212186] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.212190] usb usb6: Product: OHCI PCI host controller [ 18.212193] usb usb6: Manufacturer: Linux 6.3.0-rc2-bdver2 ohci_hcd [ 18.212195] usb usb6: SerialNumber: 0000:00:12.0 [ 18.212478] hub 6-0:1.0: USB hub found [ 18.212493] hub 6-0:1.0: 5 ports detected [ 18.213614] sr 1:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray [ 18.213625] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 18.221803] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input2 [ 18.225517] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 18.226013] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 18.226068] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 18.232258] [drm] radeon kernel modesetting enabled. [ 18.233969] Console: switching to colour dummy device 80x25 [ 18.234399] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 18.246549] [drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x174B:0xE194 0x00). [ 18.246687] ATOM BIOS: TURKS [ 18.246874] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 18.246881] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 18.246888] [drm] Detected VRAM RAM=1024M, BAR=256M [ 18.246890] [drm] RAM width 128bits DDR [ 18.246978] [drm] radeon: 1024M of VRAM memory ready [ 18.246982] [drm] radeon: 1024M of GTT memory ready. [ 18.247014] [drm] Loading TURKS Microcode [ 18.250959] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 [ 18.251483] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 18.251489] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.251494] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 18.251498] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 18.251501] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 18.251506] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 18.251509] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 18.251512] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 18.251515] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 18.252006] [drm] Internal thermal controller without fan control [ 18.257087] [drm] radeon: dpm initialized [ 18.258447] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 18.259676] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 18.269576] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 18.274106] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3 [ 18.274330] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 18.274558] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 18.278292] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 18.278721] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 18.278837] radeon 0000:01:00.0: WB enabled [ 18.278840] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 18.278843] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 18.279587] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 [ 18.279879] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 18.280779] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 18.283250] radeon 0000:01:00.0: radeon: using MSI. [ 18.283329] [drm] radeon: irq initialized. [ 18.284665] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 18.285501] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03 [ 18.285506] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.285509] usb usb7: Product: OHCI PCI host controller [ 18.285511] usb usb7: Manufacturer: Linux 6.3.0-rc2-bdver2 ohci_hcd [ 18.285513] usb usb7: SerialNumber: 0000:00:13.0 [ 18.286155] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 18.287114] hub 7-0:1.0: USB hub found [ 18.287133] hub 7-0:1.0: 5 ports detected [ 18.290602] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 18.290621] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 18.290665] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 18.299954] [drm] ring test on 0 succeeded in 2 usecs [ 18.299968] [drm] ring test on 3 succeeded in 7 usecs [ 18.352272] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03 [ 18.352285] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.352292] usb usb8: Product: OHCI PCI host controller [ 18.352297] usb usb8: Manufacturer: Linux 6.3.0-rc2-bdver2 ohci_hcd [ 18.352302] usb usb8: SerialNumber: 0000:00:14.5 [ 18.352846] hub 8-0:1.0: USB hub found [ 18.352877] hub 8-0:1.0: 2 ports detected [ 18.353800] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 18.353820] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 18.353889] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 18.412307] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03 [ 18.412319] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.412326] usb usb9: Product: OHCI PCI host controller [ 18.412331] usb usb9: Manufacturer: Linux 6.3.0-rc2-bdver2 ohci_hcd [ 18.412335] usb usb9: SerialNumber: 0000:00:16.0 [ 18.412859] hub 9-0:1.0: USB hub found [ 18.412888] hub 9-0:1.0: 4 ports detected [ 18.477156] [drm] ring test on 5 succeeded in 2 usecs [ 18.477173] [drm] UVD initialized successfully. [ 18.477527] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops radeon_audio_component_bind_ops [radeon]) [ 18.477712] [drm] ib test on ring 0 succeeded in 0 usecs [ 18.477806] [drm] ib test on ring 3 succeeded in 0 usecs [ 18.618078] usb 6-1: new low-speed USB device number 2 using ohci-pci [ 18.808176] usb 6-1: New USB device found, idVendor=046d, idProduct=c045, bcdDevice=27.30 [ 18.808189] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 18.808196] usb 6-1: Product: USB-PS/2 Optical Mouse [ 18.808202] usb 6-1: Manufacturer: Logitech [ 18.846572] hid: raw HID events driver (C) Jiri Kosina [ 18.854590] usbcore: registered new interface driver usbhid [ 18.854594] usbhid: USB HID core driver [ 18.865699] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:046D:C045.0001/input/input10 [ 18.865905] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0 [ 19.154783] [drm] ib test on ring 5 succeeded [ 19.154796] stackdepot: allocating hash table of 1048576 entries via kvcalloc [ 19.159218] [drm] Radeon Display Connectors [ 19.159223] [drm] Connector 0: [ 19.159225] [drm] DP-1 [ 19.159227] [drm] HPD5 [ 19.159229] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 19.159233] [drm] Encoders: [ 19.159235] [drm] DFP1: INTERNAL_UNIPHY1 [ 19.159237] [drm] Connector 1: [ 19.159239] [drm] HDMI-A-1 [ 19.159240] [drm] HPD1 [ 19.159242] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 19.159246] [drm] Encoders: [ 19.159247] [drm] DFP2: INTERNAL_UNIPHY2 [ 19.159249] [drm] Connector 2: [ 19.159251] [drm] DVI-I-1 [ 19.159252] [drm] HPD4 [ 19.159254] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 19.159257] [drm] Encoders: [ 19.159259] [drm] DFP3: INTERNAL_UNIPHY [ 19.159261] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 19.280405] [drm] fb mappable at 0xD0363000 [ 19.280409] [drm] vram apper at 0xD0000000 [ 19.280410] [drm] size 8294400 [ 19.280411] [drm] fb depth is 24 [ 19.280412] [drm] pitch is 7680 [ 19.280531] fbcon: radeondrmfb (fb0) is primary device [ 19.304739] usb 6-2: new low-speed USB device number 3 using ohci-pci [ 19.310959] Console: switching to colour frame buffer device 240x67 [ 19.316475] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device [ 19.316611] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 19.520259] usb 6-2: New USB device found, idVendor=1017, idProduct=1010, bcdDevice= 1.02 [ 19.520272] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 19.520278] usb 6-2: Product: Gaming Keyboard [ 19.539359] input: Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:1017:1010.0002/input/input11 [ 19.595247] hid-generic 0003:1017:1010.0002: input,hidraw1: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:12.0-2/input0 [ 19.679509] input: Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input12 [ 19.680067] input: Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input13 [ 19.735287] input: Gaming Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input14 [ 19.735753] input: Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input15 [ 19.736611] hid-generic 0003:1017:1010.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [Gaming Keyboard] on usb-0000:00:12.0-2/input1 [ 19.941403] random: crng init done [ 19.957661] device-mapper: uevent: version 1.0.3 [ 19.957831] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@xxxxxxxxxx [ 27.981341] ------------[ cut here ]------------ [ 27.981351] NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out [ 27.981412] WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:526 dev_watchdog+0x1a8/0x1b0 [ 27.981422] Modules linked in: dm_mod input_leds joydev hid_generic usbhid hid snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio evdev led_class radeon snd_hda_codec_hdmi drm_ttm_helper ttm pkcs8_key_parser i2c_algo_bit drm_display_helper sg drm_kms_helper crc32_pclmul snd_hda_intel snd_intel_dspcfg sysimgblt syscopyarea sha512_ssse3 fam15h_power sysfillrect acpi_cpufreq k10temp snd_hda_codec sr_mod it87 sha512_generic aesni_intel libaes crypto_simd cryptd hwmon_vid ohci_pci cdrom hwmon ehci_pci ohci_hcd snd_hwdep i2c_piix4 ehci_hcd snd_hda_core drm xhci_pci snd_pcm xhci_hcd snd_timer drm_panel_orientation_quirks usbcore snd video usb_common wmi soundcore backlight button processor efivarfs [ 27.981513] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.3.0-rc2-bdver2 #1 [ 27.981517] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970-GAMING, BIOS F2 04/06/2016 [ 27.981520] RIP: 0010:dev_watchdog+0x1a8/0x1b0 [ 27.981524] Code: ff ff e9 63 ff ff ff c6 05 75 94 83 00 01 4c 89 f7 e8 0c 11 fc ff 48 c7 c7 55 9e b6 9c 4c 89 f6 48 89 c2 89 d9 e8 d8 4d 9e ff <0f> 0b e9 6e ff ff ff 90 41 57 41 56 53 49 89 fe 8b 87 c8 03 00 00 [ 27.981528] RSP: 0018:ffffb58d0015cea8 EFLAGS: 00010246 [ 27.981532] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.981534] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 27.981536] RBP: 000000007fffffff R08: 0000000000000000 R09: 0000000000000000 [ 27.981539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff931b464e1490 [ 27.981541] R13: dead000000000122 R14: ffff931b464e1000 R15: ffff931b464e13e0 [ 27.981544] FS: 0000000000000000(0000) GS:ffff93224ecc0000(0000) knlGS:0000000000000000 [ 27.981547] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.981550] CR2: 00007facf21f5140 CR3: 00000001bcbc0000 CR4: 00000000000406e0 [ 27.981552] Call Trace: [ 27.981556] <IRQ> [ 27.981559] ? dev_init_scheduler+0x80/0x80 [ 27.981563] ? dev_init_scheduler+0x80/0x80 [ 27.981566] call_timer_fn+0x1d/0xa0 [ 27.981573] __run_timers+0x178/0x1f0 [ 27.981579] run_timer_softirq+0x14/0x30 [ 27.981583] __do_softirq+0xc3/0x1d9 [ 27.981589] __irq_exit_rcu+0x74/0xa0 [ 27.981594] sysvec_apic_timer_interrupt+0x6d/0x80 [ 27.981600] </IRQ> [ 27.981602] <TASK> [ 27.981604] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 27.981609] RIP: 0010:cpuidle_enter_state+0x119/0x210 [ 27.981613] Code: fe ff ff e8 d9 d9 90 ff e8 44 f8 ff ff 48 89 c5 31 ff e8 7a 5b 90 ff 45 84 ed 48 8b 5c 24 10 74 05 e8 5b b6 e7 ff fb 45 85 f6 <78> 4e 44 89 f0 48 6b d0 68 48 8b 4c 13 48 48 2b 6c 24 08 49 89 6f [ 27.981616] RSP: 0018:ffffb58d000afe88 EFLAGS: 00000202 [ 27.981620] RAX: 0000000000000000 RBX: ffffffffc02cf0f0 RCX: 0000000000000000 [ 27.981622] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 27.981624] RBP: 0000000683d128de R08: 0000000000000000 R09: 0000000000000000 [ 27.981626] R10: 0000000000000000 R11: ffffffffc02c9e70 R12: 0000000000000002 [ 27.981628] R13: 0000000000000000 R14: 0000000000000002 R15: ffff931bfece7000 [ 27.981632] ? cleanup_module+0x60/0x60 [processor] [ 27.981641] ? cpuidle_enter_state+0x106/0x210 [ 27.981645] cpuidle_enter+0x24/0x40 [ 27.981651] do_idle+0x130/0x1c0 [ 27.981656] cpu_startup_entry+0x14/0x20 [ 27.981660] start_secondary+0x8a/0x90 [ 27.981665] secondary_startup_64_no_verify+0xcf/0xdb [ 27.981669] </TASK> [ 27.981671] ---[ end trace 0000000000000000 ]--- [ 27.990294] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full [ 31.410085] BTRFS: device label gehaim devid 1 transid 53028 /dev/dm-0 scanned by (udev-worker) (1214) [ 31.666982] BTRFS info (device nvme0n1p7: state M): use zstd compression, level 2 [ 31.826015] Adding 8388604k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:8388604k SSFS [ 31.938225] BTRFS info (device dm-0): using xxhash64 (xxhash64-generic) checksum algorithm [ 31.938248] BTRFS info (device dm-0): use zstd compression, level 1 [ 31.938255] BTRFS info (device dm-0): using free space tree [ 31.976677] BTRFS info (device dm-0): enabling ssd optimizations [ 31.979942] BTRFS info (device nvme0n1p6): using xxhash64 (xxhash64-generic) checksum algorithm [ 31.979960] BTRFS info (device nvme0n1p6): setting nodatasum [ 31.979966] BTRFS info (device nvme0n1p6): using free space tree [ 31.986162] BTRFS info (device nvme0n1p6): enabling ssd optimizations [ 31.986167] BTRFS info (device nvme0n1p6): auto enabling async discard [ 33.244674] alg: No test for hmac(md4) (hmac(md4-generic)) [ 33.326946] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 33.343563] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 34.562526] Bluetooth: Core ver 2.22 [ 34.562594] NET: Registered PF_BLUETOOTH protocol family [ 34.562597] Bluetooth: HCI device and connection manager initialized [ 34.562601] Bluetooth: HCI socket layer initialized [ 34.562604] Bluetooth: L2CAP socket layer initialized [ 34.562609] Bluetooth: SCO socket layer initialized [ 34.570936] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.570942] Bluetooth: BNEP filters: protocol multicast [ 34.570949] Bluetooth: BNEP socket layer initialized [ 37.117053] zram: Added device: zram0 [ 37.117384] zram: Added device: zram1 [ 37.117650] zram: Added device: zram2 [ 37.170158] zram2: detected capacity change from 0 to 50331648 [ 37.624417] BTRFS: device label var_tmp_dir devid 1 transid 6 /dev/zram2 scanned by mkfs.btrfs (2414) [ 37.631009] BTRFS info (device zram2): using crc32c (crc32c-intel) checksum algorithm [ 37.631030] BTRFS info (device zram2): setting nodatasum [ 37.631035] BTRFS info (device zram2): using free space tree [ 37.633556] BTRFS info (device zram2): enabling ssd optimizations [ 37.633570] BTRFS info (device zram2): auto enabling async discard [ 37.633700] BTRFS info (device zram2): checking UUID tree [ 38.018878] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full [ 48.045155] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full [ 58.072096] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full [ 73.005102] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full [ 73.954031] fuse: init (API version 7.38) [ 74.229139] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=2537 'mate-session-ch' [ 88.151739] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full [ 103.084986] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
