[PATCH 5.15 062/145] net: phylib: get rid of unnecessary locking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>

[ Upstream commit f4b47a2e9463950df3e7c8b70e017877c1d4eb11 ]

The locking in phy_probe() and phy_remove() does very little to prevent
any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA
warnings. Remove it.

======================================================
WARNING: possible circular locking dependency detected
6.2.0-dirty #1108 Tainted: G        W   E
------------------------------------------------------
ip/415 is trying to acquire lock:
ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy]

but task is already holding lock:
ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (rtnl_mutex){+.+.}-{3:3}:
       __lock_acquire+0x35c/0x6c0
       lock_acquire.part.0+0xcc/0x220
       lock_acquire+0x68/0x84
       __mutex_lock+0x8c/0x414
       mutex_lock_nested+0x34/0x40
       rtnl_lock+0x24/0x30
       sfp_bus_add_upstream+0x34/0x150
       phy_sfp_probe+0x4c/0x94 [libphy]
       mv3310_probe+0x148/0x184 [marvell10g]
       phy_probe+0x8c/0x200 [libphy]
       call_driver_probe+0xbc/0x15c
       really_probe+0xc0/0x320
       __driver_probe_device+0x84/0x120
       driver_probe_device+0x44/0x120
       __device_attach_driver+0xc4/0x160
       bus_for_each_drv+0x80/0xe0
       __device_attach+0xb0/0x1f0
       device_initial_probe+0x1c/0x2c
       bus_probe_device+0xa4/0xb0
       device_add+0x360/0x53c
       phy_device_register+0x60/0xa4 [libphy]
       fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio]
       fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio]
       of_mdiobus_register+0x140/0x340 [of_mdio]
       orion_mdio_probe+0x298/0x3c0 [mvmdio]
       platform_probe+0x70/0xe0
       call_driver_probe+0x34/0x15c
       really_probe+0xc0/0x320
       __driver_probe_device+0x84/0x120
       driver_probe_device+0x44/0x120
       __driver_attach+0x104/0x210
       bus_for_each_dev+0x78/0xdc
       driver_attach+0x2c/0x3c
       bus_add_driver+0x184/0x240
       driver_register+0x80/0x13c
       __platform_driver_register+0x30/0x3c
       xt_compat_calc_jump+0x28/0xa4 [x_tables]
       do_one_initcall+0x50/0x1b0
       do_init_module+0x50/0x1fc
       load_module+0x684/0x744
       __do_sys_finit_module+0xc4/0x140
       __arm64_sys_finit_module+0x28/0x34
       invoke_syscall+0x50/0x120
       el0_svc_common.constprop.0+0x6c/0x1b0
       do_el0_svc+0x34/0x44
       el0_svc+0x48/0xf0
       el0t_64_sync_handler+0xb8/0xc0
       el0t_64_sync+0x1a0/0x1a4

-> #0 (&dev->lock){+.+.}-{3:3}:
       check_prev_add+0xb4/0xc80
       validate_chain+0x414/0x47c
       __lock_acquire+0x35c/0x6c0
       lock_acquire.part.0+0xcc/0x220
       lock_acquire+0x68/0x84
       __mutex_lock+0x8c/0x414
       mutex_lock_nested+0x34/0x40
       phy_attach_direct+0x17c/0x3a0 [libphy]
       phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink]
       phylink_fwnode_phy_connect+0x48/0x60 [phylink]
       mvpp2_open+0xec/0x2e0 [mvpp2]
       __dev_open+0x104/0x214
       __dev_change_flags+0x1d4/0x254
       dev_change_flags+0x2c/0x7c
       do_setlink+0x254/0xa50
       __rtnl_newlink+0x430/0x514
       rtnl_newlink+0x58/0x8c
       rtnetlink_rcv_msg+0x17c/0x560
       netlink_rcv_skb+0x64/0x150
       rtnetlink_rcv+0x20/0x30
       netlink_unicast+0x1d4/0x2b4
       netlink_sendmsg+0x1a4/0x400
       ____sys_sendmsg+0x228/0x290
       ___sys_sendmsg+0x88/0xec
       __sys_sendmsg+0x70/0xd0
       __arm64_sys_sendmsg+0x2c/0x40
       invoke_syscall+0x50/0x120
       el0_svc_common.constprop.0+0x6c/0x1b0
       do_el0_svc+0x34/0x44
       el0_svc+0x48/0xf0
       el0t_64_sync_handler+0xb8/0xc0
       el0t_64_sync+0x1a0/0x1a4

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock(&dev->lock);
                               lock(rtnl_mutex);
  lock(&dev->lock);

 *** DEADLOCK ***

Fixes: 298e54fa810e ("net: phy: add core phylib sfp support")
Reported-by: Marc Zyngier <maz@xxxxxxxxxx>
Signed-off-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/phy/phy_device.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 996842a1a9a35..73485383db4ef 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3052,8 +3052,6 @@ static int phy_probe(struct device *dev)
 	if (phydrv->flags & PHY_IS_INTERNAL)
 		phydev->is_internal = true;
 
-	mutex_lock(&phydev->lock);
-
 	/* Deassert the reset signal */
 	phy_device_reset(phydev, 0);
 
@@ -3121,12 +3119,10 @@ static int phy_probe(struct device *dev)
 	phydev->state = PHY_READY;
 
 out:
-	/* Assert the reset signal */
+	/* Re-assert the reset signal on error */
 	if (err)
 		phy_device_reset(phydev, 1);
 
-	mutex_unlock(&phydev->lock);
-
 	return err;
 }
 
@@ -3136,9 +3132,7 @@ static int phy_remove(struct device *dev)
 
 	cancel_delayed_work_sync(&phydev->state_queue);
 
-	mutex_lock(&phydev->lock);
 	phydev->state = PHY_DOWN;
-	mutex_unlock(&phydev->lock);
 
 	sfp_bus_del_upstream(phydev->sfp_bus);
 	phydev->sfp_bus = NULL;
-- 
2.39.2






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux