From: Petr Oros <poros@xxxxxxxxxx>
[ Upstream commit 84cba1840e68430325ac133a11be06bfb2f7acd8 ]
ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice:
Reimplement module reads used by ethtool") In this refactor,
ice_get_module_eeprom() reads the eeprom in blocks of size 8.
But the condition that should protect the buffer overflow
ignores the last block. The last block always contains zeros.
Bug uncovered by ethtool upstream commit 9538f384b535
("netlink: eeprom: Defer page requests to individual parsers")
After this commit, ethtool reads a block with length = 1;
to read the SFF-8024 identifier value.
unpatched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset Values
------ ------
0x0090: 00 00 00 00 00 00 00 00
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00
$
$ ethtool -m enp65s0f0np0
Offset Values
------ ------
0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00
0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
patched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78
$ ethtool -m enp65s0f0np0
Identifier : 0x11 (QSFP28)
Extended identifier : 0x00
Extended identifier description : 1.5W max. Power consumption
Extended identifier description : No CDR in TX, No CDR in RX
Extended identifier description : High Power Class (> 3.5 W) not enabled
Connector : 0x23 (No separable connector)
Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Transceiver type : 40G Ethernet: 40G Base-CR4
Transceiver type : 25G Ethernet: 25G Base-CR CA-N
Encoding : 0x05 (64B/66B)
BR, Nominal : 25500Mbps
Rate identifier : 0x00
Length (SMF,km) : 0km
Length (OM3 50um) : 0m
Length (OM2 50um) : 0m
Length (OM1 62.5um) : 0m
Length (Copper or Active cable) : 1m
Transmitter technology : 0xa0 (Copper cable unequalized)
Attenuation at 2.5GHz : 4db
Attenuation at 5.0GHz : 5db
Attenuation at 7.0GHz : 7db
Attenuation at 12.9GHz : 10db
........
....
Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool")
Signed-off-by: Petr Oros <poros@xxxxxxxxxx>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
Tested-by: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/intel/ice/ice_ethtool.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 24001035910e0..60f73e775beeb 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -3998,6 +3998,8 @@ ice_get_module_eeprom(struct net_device *netdev,
* SFP modules only ever use page 0.
*/
if (page == 0 || !(data[0x2] & 0x4)) {
+ u32 copy_len;
+
/* If i2c bus is busy due to slow page change or
* link management access, call can fail. This is normal.
* So we retry this a few times.
@@ -4021,8 +4023,8 @@ ice_get_module_eeprom(struct net_device *netdev,
}
/* Make sure we have enough room for the new block */
- if ((i + SFF_READ_BLOCK_SIZE) < ee->len)
- memcpy(data + i, value, SFF_READ_BLOCK_SIZE);
+ copy_len = min_t(u32, SFF_READ_BLOCK_SIZE, ee->len - i);
+ memcpy(data + i, value, copy_len);
}
}
return 0;
--
2.39.2
