From: Jani Nikula <jani.nikula@xxxxxxxxx> [ Upstream commit 1cbc1f0d324ba6c4d1b10ac6362b5e0b029f63d5 ] We try to avoid sending VICs defined in the later specs in AVI infoframes to sinks that conform to the earlier specs, to not upset them, and use 0 for the VIC instead. However, we do this detection and conversion to 0 too early, as we'll need the actual VIC to figure out the aspect ratio. In particular, for a mode with 64:27 aspect ratio, 0 for VIC fails the AVI infoframe generation altogether with -EINVAL. Separate the VIC lookup from the "filtering", and postpone the filtering, to use the proper VIC for aspect ratio handling, and the 0 VIC for the infoframe video code as needed. Reported-by: William Tseng <william.tseng@xxxxxxxxx> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6153 Cc: <stable@xxxxxxxxxxxxxxx> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx> Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Link: https://patchwork.freedesktop.org/patch/msgid/c3e78cc6d01ed237f71ad0038826b08d83d75eef.1672826282.git.jani.nikula@xxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/gpu/drm/drm_edid.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index f9735861741c1..2e73042e5d070 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -5095,8 +5095,6 @@ static u8 drm_mode_hdmi_vic(struct drm_connector *connector, static u8 drm_mode_cea_vic(struct drm_connector *connector, const struct drm_display_mode *mode) { - u8 vic; - /* * HDMI spec says if a mode is found in HDMI 1.4b 4K modes * we should send its VIC in vendor infoframes, else send the @@ -5106,13 +5104,18 @@ static u8 drm_mode_cea_vic(struct drm_connector *connector, if (drm_mode_hdmi_vic(connector, mode)) return 0; - vic = drm_match_cea_mode(mode); + return drm_match_cea_mode(mode); +} - /* - * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but - * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we - * have to make sure we dont break HDMI 1.4 sinks. - */ +/* + * Avoid sending VICs defined in HDMI 2.0 in AVI infoframes to sinks that + * conform to HDMI 1.4. + * + * HDMI 1.4 (CTA-861-D) VIC range: [1..64] + * HDMI 2.0 (CTA-861-F) VIC range: [1..107] + */ +static u8 vic_for_avi_infoframe(const struct drm_connector *connector, u8 vic) +{ if (!is_hdmi2_sink(connector) && vic > 64) return 0; @@ -5191,7 +5194,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, picture_aspect = HDMI_PICTURE_ASPECT_NONE; } - frame->video_code = vic; + frame->video_code = vic_for_avi_infoframe(connector, vic); frame->picture_aspect = picture_aspect; frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE; frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN; -- 2.39.2
