[PATCH 5.10 419/529] PCI/PM: Observe reset delay irrespective of bridge_d3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lukas Wunner <lukas@xxxxxxxxx>

commit 8ef0217227b42e2c34a18de316cee3da16c9bf1e upstream.

If a PCI bridge is suspended to D3cold upon entering system sleep,
resuming it entails a Fundamental Reset per PCIe r6.0 sec 5.8.

The delay prescribed after a Fundamental Reset in PCIe r6.0 sec 6.6.1
is sought to be observed by:

  pci_pm_resume_noirq()
    pci_pm_bridge_power_up_actions()
      pci_bridge_wait_for_secondary_bus()

However, pci_bridge_wait_for_secondary_bus() bails out if the bridge_d3
flag is not set.  That flag indicates whether a bridge is allowed to
suspend to D3cold at *runtime*.

Hence *no* delay is observed on resume from system sleep if runtime
D3cold is forbidden.  That doesn't make any sense, so drop the bridge_d3
check from pci_bridge_wait_for_secondary_bus().

The purpose of the bridge_d3 check was probably to avoid delays if a
bridge remained in D0 during suspend.  However the sole caller of
pci_bridge_wait_for_secondary_bus(), pci_pm_bridge_power_up_actions(),
is only invoked if the previous power state was D3cold.  Hence the
additional bridge_d3 check seems superfluous.

Fixes: ad9001f2f411 ("PCI/PM: Add missing link delays required by the PCIe spec")
Link: https://lore.kernel.org/r/eb37fa345285ec8bacabbf06b020b803f77bdd3d.1673769517.git.lukas@xxxxxxxxx
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@xxxxxxxxx>
Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v5.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/pci/pci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4808,7 +4808,7 @@ void pci_bridge_wait_for_secondary_bus(s
 	if (pci_dev_is_disconnected(dev))
 		return;
 
-	if (!pci_is_bridge(dev) || !dev->bridge_d3)
+	if (!pci_is_bridge(dev))
 		return;
 
 	down_read(&pci_bus_sem);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux