From: Frank Jungclaus <frank.jungclaus@xxxxxx>
[ Upstream commit 118469f88180438ef43dee93d71f77c00e7b425d ]
Move the supply for cf->data[3] (bit stream position of CAN error), in
case of a bus- or protocol-error, outside of the "switch (ecc &
SJA1000_ECC_MASK){}"-statement, because this bit stream position is
independent of the error type.
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@xxxxxx>
Link: https://lore.kernel.org/all/20230216190450.3901254-2-frank.jungclaus@xxxxxx
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/can/usb/esd_usb2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c
index 73c5343e609bc..c9ccce6c60b46 100644
--- a/drivers/net/can/usb/esd_usb2.c
+++ b/drivers/net/can/usb/esd_usb2.c
@@ -278,7 +278,6 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
cf->data[2] |= CAN_ERR_PROT_STUFF;
break;
default:
- cf->data[3] = ecc & SJA1000_ECC_SEG;
break;
}
@@ -286,6 +285,9 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
if (!(ecc & SJA1000_ECC_DIR))
cf->data[2] |= CAN_ERR_PROT_TX;
+ /* Bit stream position in CAN frame as the error was detected */
+ cf->data[3] = ecc & SJA1000_ECC_SEG;
+
if (priv->can.state == CAN_STATE_ERROR_WARNING ||
priv->can.state == CAN_STATE_ERROR_PASSIVE) {
cf->data[1] = (txerr > rxerr) ?
--
2.39.2
