From: Frank Jungclaus <frank.jungclaus@xxxxxx> [ Upstream commit 118469f88180438ef43dee93d71f77c00e7b425d ] Move the supply for cf->data[3] (bit stream position of CAN error), in case of a bus- or protocol-error, outside of the "switch (ecc & SJA1000_ECC_MASK){}"-statement, because this bit stream position is independent of the error type. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Frank Jungclaus <frank.jungclaus@xxxxxx> Link: https://lore.kernel.org/all/20230216190450.3901254-2-frank.jungclaus@xxxxxx Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/can/usb/esd_usb2.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c index fbe1173b2651f..b15154a6c53eb 100644 --- a/drivers/net/can/usb/esd_usb2.c +++ b/drivers/net/can/usb/esd_usb2.c @@ -284,7 +284,6 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv, cf->data[2] |= CAN_ERR_PROT_STUFF; break; default: - cf->data[3] = ecc & SJA1000_ECC_SEG; break; } @@ -292,6 +291,9 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv, if (!(ecc & SJA1000_ECC_DIR)) cf->data[2] |= CAN_ERR_PROT_TX; + /* Bit stream position in CAN frame as the error was detected */ + cf->data[3] = ecc & SJA1000_ECC_SEG; + if (priv->can.state == CAN_STATE_ERROR_WARNING || priv->can.state == CAN_STATE_ERROR_PASSIVE) { cf->data[1] = (txerr > rxerr) ? -- 2.39.2