From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
[ Upstream commit df993fced230daa8452892406f3180c93ebf7e7b ]
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-2-1f8e0770798b@xxxxxxxxxx
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_hvs.c | 11 +++++++++++
drivers/gpu/drm/vc4/vc4_regs.h | 6 ++++++
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 9d88bfb50c9b0..3856ac289d380 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -718,6 +718,17 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
SCALER_DISPCTRL_DSPEISLUR(2) |
SCALER_DISPCTRL_SCLEIRQ);
+ /* Set AXI panic mode.
+ * VC4 panics when < 2 lines in FIFO.
+ * VC5 panics when less than 1 line in the FIFO.
+ */
+ dispctrl &= ~(SCALER_DISPCTRL_PANIC0_MASK |
+ SCALER_DISPCTRL_PANIC1_MASK |
+ SCALER_DISPCTRL_PANIC2_MASK);
+ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC0);
+ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1);
+ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2);
+
HVS_WRITE(SCALER_DISPCTRL, dispctrl);
ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 8ac2f088106a6..fe6d0e21ddd8d 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -220,6 +220,12 @@
#define SCALER_DISPCTRL 0x00000000
/* Global register for clock gating the HVS */
# define SCALER_DISPCTRL_ENABLE BIT(31)
+# define SCALER_DISPCTRL_PANIC0_MASK VC4_MASK(25, 24)
+# define SCALER_DISPCTRL_PANIC0_SHIFT 24
+# define SCALER_DISPCTRL_PANIC1_MASK VC4_MASK(27, 26)
+# define SCALER_DISPCTRL_PANIC1_SHIFT 26
+# define SCALER_DISPCTRL_PANIC2_MASK VC4_MASK(29, 28)
+# define SCALER_DISPCTRL_PANIC2_SHIFT 28
# define SCALER_DISPCTRL_DSP3_MUX_MASK VC4_MASK(19, 18)
# define SCALER_DISPCTRL_DSP3_MUX_SHIFT 18
--
2.39.2
