From: Adam Ford <aford173@xxxxxxxxx>
[ Upstream commit d7f9492dfc03153ac56ab59066a196558748f575 ]
The board used to originally introduce the Beacon Embedded RZ/G2[M/N/H]
boards had a GPIO expander with address 20, but this was changed when
the final board went to production.
The production boards changed both the part itself and the address.
With the incorrect address, the LCD cannot come up. If the LCD fails,
the rcar-du driver fails to come up, and that also breaks HDMI.
Pre-release board were not shipped to the general public, so it should
be safe to push this as a fix. Anyone with a production board would
have video fail due to this GPIO expander change.
Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Link: https://lore.kernel.org/r/20230114225647.227972-1-aford173@xxxxxxxxx
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../dts/renesas/beacon-renesom-baseboard.dtsi | 24 ++++++++-----------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 8166e3c1ff4e5..cafde91b4721b 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -437,20 +437,6 @@ wm8962_endpoint: endpoint {
};
};
- /* 0 - lcd_reset */
- /* 1 - lcd_pwr */
- /* 2 - lcd_select */
- /* 3 - backlight-enable */
- /* 4 - Touch_shdwn */
- /* 5 - LCD_H_pol */
- /* 6 - lcd_V_pol */
- gpio_exp1: gpio@20 {
- compatible = "onnn,pca9654";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
touchscreen@26 {
compatible = "ilitek,ili2117";
reg = <0x26>;
@@ -482,6 +468,16 @@ hd3ss3220_out_ep: endpoint {
};
};
};
+
+ gpio_exp1: gpio@70 {
+ compatible = "nxp,pca9538";
+ reg = <0x70>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select",
+ "backlight-enable", "Touch_shdwn",
+ "LCD_H_pol", "lcd_V_pol";
+ };
};
&lvds0 {
--
2.39.2
