From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> [ Upstream commit 0f1c806b65d136a5fe0b88adad5ff1cb451fc401 ] The systimer block derives its 13 MHz clock by dividing the main 26 MHz oscillator clock by 2 internally, not through the TOPCKGEN clock controller. On the MT8195 this divider is set either by power-on-reset or by the bootloader. The bootloader may then make the divider unconfigurable to, but can be read out by, the operating system. Making the systimer block take the 26 MHz clock directly requires changing the implementations. As an ABI compatible fix, change the input clock of the systimer block a fixed factor divide-by-2 clock that takes the 26 MHz oscillator as its input. Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board") Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20221201084229.3464449-4-wenst@xxxxxxxxxxxx Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 350d6c2ea622a..6dad8aaee436c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -244,6 +244,15 @@ sound: mt8195-sound { status = "disabled"; }; + clk13m: fixed-factor-clock-13m { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&clk26m>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "clk13m"; + }; + clk26m: oscillator-26m { compatible = "fixed-clock"; #clock-cells = <0>; @@ -701,7 +710,7 @@ systimer: timer@10017000 { "mediatek,mt6765-timer"; reg = <0 0x10017000 0 0x1000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&topckgen CLK_TOP_CLK26M_D2>; + clocks = <&clk13m>; }; pwrap: pwrap@10024000 { -- 2.39.2