FAILED: patch "[PATCH] Revert "ath9k: Calculate sleep duration"" failed to apply to 3.16-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 3.16-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From ae0fd6354134e63aa3e62456e2080c430287144d Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
Date: Thu, 11 Sep 2014 19:05:48 +0530
Subject: [PATCH] Revert "ath9k: Calculate sleep duration"

This reverts commit 09ebb810927a110e4c354beb20308830d108a54b.

ath9k_hw_set_sta_beacon_timers() configures AR_TIM_PERIOD with
the beacon interval. Before this commit, the sleepduration was
never greater than the beacon interval. But now, the behavior
has changed. For example, with an AP that uses a beacon interval of 100:

ath: phy9: next beacon 61128704
ath: phy9: beacon period 204800
ath: phy9: DTIM period 204800

If the sleepduration is calculated based on the listen time, then
the bmiss threshold should also be changed since the HW would
be in sleep state for a longer time, but that is not done currently.

To avoid configuring a higher beacon interval based on the sleepduration,
revert to the original behavior. Power consumption is not a
problem since PS is disabled in ath9k anyway.

Cc: stable@xxxxxxxxxxxxxxx
Cc: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>

diff --git a/drivers/net/wireless/ath/ath9k/common-beacon.c b/drivers/net/wireless/ath/ath9k/common-beacon.c
index 733be5178481..6ad44470d0f2 100644
--- a/drivers/net/wireless/ath/ath9k/common-beacon.c
+++ b/drivers/net/wireless/ath/ath9k/common-beacon.c
@@ -57,7 +57,7 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
 				 struct ath9k_beacon_state *bs)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
-	int dtim_intval, sleepduration;
+	int dtim_intval;
 	u64 tsf;
 
 	/* No need to configure beacon if we are not associated */
@@ -75,7 +75,6 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
 	 * last beacon we received (which may be none).
 	 */
 	dtim_intval = conf->intval * conf->dtim_period;
-	sleepduration = ah->hw->conf.listen_interval * conf->intval;
 
 	/*
 	 * Pull nexttbtt forward to reflect the current
@@ -113,7 +112,7 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
 	 */
 
 	bs->bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
-						  sleepduration));
+						  conf->intval));
 	if (bs->bs_sleepduration > bs->bs_dtimperiod)
 		bs->bs_sleepduration = bs->bs_dtimperiod;
 

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]