From: Heiner Kallweit <hkallweit1@xxxxxxxxx> commit d182bcf300772d8b2e5f43e47fa0ebda2b767cc4 upstream. The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: 221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller") Reported-by: Peter Suti <peter.suti@xxxxxxxxxxxxxxxxxxx> Tested-by: Vyacheslav Bocharov <adeep@xxxxxxxxx> Tested-by: Peter Suti <peter.suti@xxxxxxxxxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> Acked-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> Link: https://lore.kernel.org/r/c00655d3-02f8-6f5f-4239-ca2412420cad@xxxxxxxxx Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -167,7 +167,7 @@ sd_emmc_b: sd@5000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0x5000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, @@ -179,7 +179,7 @@ sd_emmc_c: mmc@7000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0x7000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_SD_EMMC_C_CLK0>,
