Re: [PATCH v2 02/17] drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 07, 2023 at 07:21:48PM -0500, Lyude Paul wrote:
> On Tue, 2023-02-07 at 14:11 +0200, Imre Deak wrote:
> > On Mon, Feb 06, 2023 at 07:42:32PM -0500, Lyude Paul wrote:
> > > On Wed, 2023-02-01 at 17:04 +0200, Imre Deak wrote:
> > > > 
> > > > Yes, this patch should have no functional change, so please check what
> > > > would apply to other drivers as well.
> > > > 
> > > > Could you also check Ville's comment about storing start_slot elsewhere
> > > > than the atomic state (leaving only time_slots there). I wonder if that
> > > > would work, at least it would simplify things I think.
> > > 
> > > Ideally it'd be nice if we could have all this info in the atomic commit, but
> > > yeah - you're not the first person to find this a bit confusing. FWIW though,
> > > the way we store start_slot right now is intended to follow the same kind of
> > > behavior we have with atomic CRTC commit dependencies, I think I also made it
> > > that way so all of the state would be in a single place but there's no hard
> > > requirement for it.
> > 
> > As I understood the atomic state should be precomputed during atomic
> > check and not changed later during the commit phase. In case of
> > start_slot this would mean knowing in advance the actual (driver
> > specific) disabling / enabling sequence of the payloads, not sure how
> > feasible it is to figure that out. start_slot also changes dynamically
> 
> It isn't feasible afaict, which was the main motivation for having the strange
> update procedure - this is pretty much something that needs to be determined
> at commit time.
>
> > as each payload is disabled, so these intermediate versions of the field
> > would need to be tracked somehow separately from the final (precomputed)
> > versions.
> 
> FWIW, the current way this works is that we call
> drm_dp_mst_atomic_wait_for_dependencies() in order to ensure that no one's
> currently writing to the start_slot field (remember, at this point we may not
> have atomic locks held anymore). Then at that point, start_slot in the new
> atomic state should hold the current in-hw start_slot value. start_slot isn't
> actually set to the new starting slot until drm_dp_add_payload_part1(). That
> of course as you pointed out, doesn't help us unless we read all of the
> start_slot values before we start changing payloads - since disabling payloads
> inevitably changes the start slot of payloads that come afterwards.
> 
> I'll admit I'm a bit surprised this logic was wrong - if I recall the whole
> reason I assumed this was OK when writing this code was that since we're
> updating one payload at a time, ACT, repeat, that the start slots of each
> payload in hardware _would_ actually change in the same way we modify them in
> helpers. e.g., my expectation was if we had a bunch of payloads like this:
> 
> Payload #1: 15 slots, start_slot=0
> Payload #2: 15 slots, start_slot=15
> Payload #3: 15 slots, start_slot=30
> 
> And then disabled say, payload #1, that immediately after we get the ACT that
> the payload table in hardware would look like this:
> 
> Payload #2: 15 slots, start_slot=0
> Payload #3: 15 slots, start_slot=15

The above is the actual and expected HW state state yes.

> But it sounds like it actually would look like this in the real world?
> 
> Payload #2: 15 slots, start_slot=15
> Payload #3: 15 slots, start_slot=30

No, the problem currently is not that start_slot of the subsequent
payloads are not shifted towards the beginning. Rather the atomic state
doesn't get updated properly, becoming out of sync with the HW. For
instance in a commit resizing payload #1, in the commit phase
(intel_atomic_commit_tail()) will begin by removing payload #1. The
initial state is

            old payload state         new payload state
Payload #1: 15 slots, start_slot=0    20 slots, start_slot=0
Payload #2: 15 slots, start_slot=15   15 slots, start_slot=15
Payload #3: 15 slots, start_slot=30   15 slots, start_slot=30

mgr->next_start_slot = 45

intel_mst_disable_dp() will pass the old MST and payload state to
drm_dp_remove_payload(): The MST state was added during atomic check,
since payload #1 changed, then intel_atomic_commit() ->
drm_atomic_helper_swap_state() sets the MST current state (returned by
drm_atomic_get_mst_topology_state()) to point to the old state. So at
the point drm_dp_remove_payload() returns we have:

            old payload state         new payload state
Payload #1: 15 slots, start_slot=-1   20 slots, start_slot=0
Payload #2: 15 slots, start_slot=0    15 slots, start_slot=15
Payload #3: 15 slots, start_slot=15   15 slots, start_slot=30

mgr->next_start_slot = 30

then after re-enabling payload #1, after drm_dp_add_payload_part1()
returns (passing to it the new MST and payload state) we have:

            old payload state         new payload state
Payload #1: 15 slots, start_slot=-1   20 slots, start_slot=30
Payload #2: 15 slots, start_slot=0    15 slots, start_slot=15
Payload #3: 15 slots, start_slot=15   15 slots, start_slot=30

mgr->next_start_slot = 50

So in the new SW state payload #1 and #3 incorrectly overlap, with the
actual HW state being:

Payload #1: 20 slots, start_slot=30
Payload #2: 15 slots, start_slot=0
Payload #3: 15 slots, start_slot=15

A subsequent commit will see the wrong start_slot in the SW state for
payload #2 (15) and #3 (30).

> So I'm curious, is there something I missed here? At what point does the MST
> hub at the other end decide that it's time to move the start slots back?

The hub shifts back payloads after the DPCD write command to 0x1c0 -
0x1c2 to remove a payload. (The HW OTOH does the corresponding shift at
the point of disabling the stream, in intel_mst_post_disable_dp() ->
intel_disable_transcoder() for i915).

> (keep in mind, the MST specification does explicitly mention that
> there should never be holes in the payload table - so something has to
> be shifting the payloads back).

Right, the hubs I checked conform to this.

> > > So if you guys think it'd be better design-wise to store this something else,
> > > I've got no strong feelings either way
> > > > 
> > > > > For 0-2:
> > > > > 
> > > > > Reviewed-by: Lyude Paul <lyude@xxxxxxxxxx>
> > > > 
> > > > Thanks.
> > > > 
> > > > > 
> > > > > > 
> > > > > > Cc: Lyude Paul <lyude@xxxxxxxxxx>
> > > > > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > > > Cc: Ben Skeggs <bskeggs@xxxxxxxxxx>
> > > > > > Cc: Karol Herbst <kherbst@xxxxxxxxxx>
> > > > > > Cc: Harry Wentland <harry.wentland@xxxxxxx>
> > > > > > Cc: Alex Deucher <alexander.deucher@xxxxxxx>
> > > > > > Cc: Wayne Lin <Wayne.Lin@xxxxxxx>
> > > > > > Cc: stable@xxxxxxxxxxxxxxx # 6.1
> > > > > > Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > > > > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > > > > > ---
> > > > > >  .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c |  2 +-
> > > > > >  drivers/gpu/drm/display/drm_dp_mst_topology.c | 26 ++++++++++---------
> > > > > >  drivers/gpu/drm/i915/display/intel_dp_mst.c   |  4 ++-
> > > > > >  drivers/gpu/drm/nouveau/dispnv50/disp.c       |  2 +-
> > > > > >  include/drm/display/drm_dp_mst_helper.h       |  3 ++-
> > > > > >  5 files changed, 21 insertions(+), 16 deletions(-)
> > > > > > 
> > > > > > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> > > > > > index a50319fc42b11..180d3893b68da 100644
> > > > > > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> > > > > > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> > > > > > @@ -208,7 +208,7 @@ bool dm_helpers_dp_mst_write_payload_allocation_table(
> > > > > >  	if (enable)
> > > > > >  		drm_dp_add_payload_part1(mst_mgr, mst_state, payload);
> > > > > >  	else
> > > > > > -		drm_dp_remove_payload(mst_mgr, mst_state, payload);
> > > > > > +		drm_dp_remove_payload(mst_mgr, mst_state, payload, payload);
> > > > > >  
> > > > > >  	/* mst_mgr->->payloads are VC payload notify MST branch using DPCD or
> > > > > >  	 * AUX message. The sequence is slot 1-63 allocated sequence for each
> > > > > > diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c
> > > > > > index 847c10aa2098c..1990ff5dc7ddd 100644
> > > > > > --- a/drivers/gpu/drm/display/drm_dp_mst_topology.c
> > > > > > +++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c
> > > > > > @@ -3342,7 +3342,8 @@ EXPORT_SYMBOL(drm_dp_add_payload_part1);
> > > > > >   * drm_dp_remove_payload() - Remove an MST payload
> > > > > >   * @mgr: Manager to use.
> > > > > >   * @mst_state: The MST atomic state
> > > > > > - * @payload: The payload to write
> > > > > > + * @old_payload: The payload with its old state
> > > > > > + * @new_payload: The payload to write
> > > > > >   *
> > > > > >   * Removes a payload from an MST topology if it was successfully assigned a start slot. Also updates
> > > > > >   * the starting time slots of all other payloads which would have been shifted towards the start of
> > > > > > @@ -3350,36 +3351,37 @@ EXPORT_SYMBOL(drm_dp_add_payload_part1);
> > > > > >   */
> > > > > >  void drm_dp_remove_payload(struct drm_dp_mst_topology_mgr *mgr,
> > > > > >  			   struct drm_dp_mst_topology_state *mst_state,
> > > > > > -			   struct drm_dp_mst_atomic_payload *payload)
> > > > > > +			   const struct drm_dp_mst_atomic_payload *old_payload,
> > > > > > +			   struct drm_dp_mst_atomic_payload *new_payload)
> > > > > >  {
> > > > > >  	struct drm_dp_mst_atomic_payload *pos;
> > > > > >  	bool send_remove = false;
> > > > > >  
> > > > > >  	/* We failed to make the payload, so nothing to do */
> > > > > > -	if (payload->vc_start_slot == -1)
> > > > > > +	if (new_payload->vc_start_slot == -1)
> > > > > >  		return;
> > > > > >  
> > > > > >  	mutex_lock(&mgr->lock);
> > > > > > -	send_remove = drm_dp_mst_port_downstream_of_branch(payload->port, mgr->mst_primary);
> > > > > > +	send_remove = drm_dp_mst_port_downstream_of_branch(new_payload->port, mgr->mst_primary);
> > > > > >  	mutex_unlock(&mgr->lock);
> > > > > >  
> > > > > >  	if (send_remove)
> > > > > > -		drm_dp_destroy_payload_step1(mgr, mst_state, payload);
> > > > > > +		drm_dp_destroy_payload_step1(mgr, mst_state, new_payload);
> > > > > >  	else
> > > > > >  		drm_dbg_kms(mgr->dev, "Payload for VCPI %d not in topology, not sending remove\n",
> > > > > > -			    payload->vcpi);
> > > > > > +			    new_payload->vcpi);
> > > > > >  
> > > > > >  	list_for_each_entry(pos, &mst_state->payloads, next) {
> > > > > > -		if (pos != payload && pos->vc_start_slot > payload->vc_start_slot)
> > > > > > -			pos->vc_start_slot -= payload->time_slots;
> > > > > > +		if (pos != new_payload && pos->vc_start_slot > new_payload->vc_start_slot)
> > > > > > +			pos->vc_start_slot -= old_payload->time_slots;
> > > > > >  	}
> > > > > > -	payload->vc_start_slot = -1;
> > > > > > +	new_payload->vc_start_slot = -1;
> > > > > >  
> > > > > >  	mgr->payload_count--;
> > > > > > -	mgr->next_start_slot -= payload->time_slots;
> > > > > > +	mgr->next_start_slot -= old_payload->time_slots;
> > > > > >  
> > > > > > -	if (payload->delete)
> > > > > > -		drm_dp_mst_put_port_malloc(payload->port);
> > > > > > +	if (new_payload->delete)
> > > > > > +		drm_dp_mst_put_port_malloc(new_payload->port);
> > > > > >  }
> > > > > >  EXPORT_SYMBOL(drm_dp_remove_payload);
> > > > > >  
> > > > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > > > > index f3cb12dcfe0a7..dc4e5ff1dbb31 100644
> > > > > > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > > > > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > > > > @@ -526,6 +526,8 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
> > > > > >  		to_intel_connector(old_conn_state->connector);
> > > > > >  	struct drm_dp_mst_topology_state *mst_state =
> > > > > >  		drm_atomic_get_mst_topology_state(&state->base, &intel_dp->mst_mgr);
> > > > > > +	struct drm_dp_mst_atomic_payload *payload =
> > > > > > +		drm_atomic_get_mst_payload_state(mst_state, connector->port);
> > > > > >  	struct drm_i915_private *i915 = to_i915(connector->base.dev);
> > > > > >  
> > > > > >  	drm_dbg_kms(&i915->drm, "active links %d\n",
> > > > > > @@ -534,7 +536,7 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
> > > > > >  	intel_hdcp_disable(intel_mst->connector);
> > > > > >  
> > > > > >  	drm_dp_remove_payload(&intel_dp->mst_mgr, mst_state,
> > > > > > -			      drm_atomic_get_mst_payload_state(mst_state, connector->port));
> > > > > > +			      payload, payload);
> > > > > >  
> > > > > >  	intel_audio_codec_disable(encoder, old_crtc_state, old_conn_state);
> > > > > >  }
> > > > > > diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c
> > > > > > index edcb2529b4025..ed9d374147b8d 100644
> > > > > > --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
> > > > > > +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
> > > > > > @@ -885,7 +885,7 @@ nv50_msto_prepare(struct drm_atomic_state *state,
> > > > > >  
> > > > > >  	// TODO: Figure out if we want to do a better job of handling VCPI allocation failures here?
> > > > > >  	if (msto->disabled) {
> > > > > > -		drm_dp_remove_payload(mgr, mst_state, payload);
> > > > > > +		drm_dp_remove_payload(mgr, mst_state, payload, payload);
> > > > > >  
> > > > > >  		nvif_outp_dp_mst_vcpi(&mstm->outp->outp, msto->head->base.index, 0, 0, 0, 0);
> > > > > >  	} else {
> > > > > > diff --git a/include/drm/display/drm_dp_mst_helper.h b/include/drm/display/drm_dp_mst_helper.h
> > > > > > index 41fd8352ab656..f5eb9aa152b14 100644
> > > > > > --- a/include/drm/display/drm_dp_mst_helper.h
> > > > > > +++ b/include/drm/display/drm_dp_mst_helper.h
> > > > > > @@ -841,7 +841,8 @@ int drm_dp_add_payload_part2(struct drm_dp_mst_topology_mgr *mgr,
> > > > > >  			     struct drm_dp_mst_atomic_payload *payload);
> > > > > >  void drm_dp_remove_payload(struct drm_dp_mst_topology_mgr *mgr,
> > > > > >  			   struct drm_dp_mst_topology_state *mst_state,
> > > > > > -			   struct drm_dp_mst_atomic_payload *payload);
> > > > > > +			   const struct drm_dp_mst_atomic_payload *old_payload,
> > > > > > +			   struct drm_dp_mst_atomic_payload *new_payload);
> > > > > >  
> > > > > >  int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr);
> > > > > >  
> > > > > 
> > > > > -- 
> > > > > Cheers,
> > > > >  Lyude Paul (she/her)
> > > > >  Software Engineer at Red Hat
> > > > > 
> > > > 
> > > 
> > > -- 
> > > Cheers,
> > >  Lyude Paul (she/her)
> > >  Software Engineer at Red Hat
> > > 
> > 
> 
> -- 
> Cheers,
>  Lyude Paul (she/her)
>  Software Engineer at Red Hat
> 



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux