[PATCH 6.1 149/208] nvmem: sunxi_sid: Always use 32-bit MMIO reads

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Samuel Holland <samuel@xxxxxxxxxxxx>

commit c151d5ed8e8fe0474bd61dce7f2076ca5916c683 upstream.

The SID SRAM on at least some SoCs (A64 and D1) returns different values
when read with bus cycles narrower than 32 bits. This is not immediately
obvious, because memcpy_fromio() uses word-size accesses as long as
enough data is being copied.

The vendor driver always uses 32-bit MMIO reads, so do the same here.
This is faster than the register-based method, which is currently used
as a workaround on A64. And it fixes the values returned on D1, where
the SRAM method was being used.

The special case for the last word is needed to maintain .word_size == 1
for sysfs ABI compatibility, as noted previously in commit de2a3eaea552
("nvmem: sunxi_sid: Optimize register read-out method").

Fixes: 07ae4fde9efa ("nvmem: sunxi_sid: Add support for D1 variant")
Cc: stable@xxxxxxxxxxxxxxx
Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>
Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230127104015.23839-3-srinivas.kandagatla@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/nvmem/sunxi_sid.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
index 5750e1f4bcdb..92dfe4cb10e3 100644
--- a/drivers/nvmem/sunxi_sid.c
+++ b/drivers/nvmem/sunxi_sid.c
@@ -41,8 +41,21 @@ static int sunxi_sid_read(void *context, unsigned int offset,
 			  void *val, size_t bytes)
 {
 	struct sunxi_sid *sid = context;
+	u32 word;
+
+	/* .stride = 4 so offset is guaranteed to be aligned */
+	__ioread32_copy(val, sid->base + sid->value_offset + offset, bytes / 4);
 
-	memcpy_fromio(val, sid->base + sid->value_offset + offset, bytes);
+	val += round_down(bytes, 4);
+	offset += round_down(bytes, 4);
+	bytes = bytes % 4;
+
+	if (!bytes)
+		return 0;
+
+	/* Handle any trailing bytes */
+	word = readl_relaxed(sid->base + sid->value_offset + offset);
+	memcpy(val, &word, bytes);
 
 	return 0;
 }
-- 
2.39.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux