[PATCH 4.19 38/80] module: Dont wait for GOING modules

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Petr Pavlu <petr.pavlu@xxxxxxxx>

commit 0254127ab977e70798707a7a2b757c9f3c971210 upstream.

During a system boot, it can happen that the kernel receives a burst of
requests to insert the same module but loading it eventually fails
during its init call. For instance, udev can make a request to insert
a frequency module for each individual CPU when another frequency module
is already loaded which causes the init function of the new module to
return an error.

Since commit 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for
modules that have finished loading"), the kernel waits for modules in
MODULE_STATE_GOING state to finish unloading before making another
attempt to load the same module.

This creates unnecessary work in the described scenario and delays the
boot. In the worst case, it can prevent udev from loading drivers for
other devices and might cause timeouts of services waiting on them and
subsequently a failed boot.

This patch attempts a different solution for the problem 6e6de3dee51a
was trying to solve. Rather than waiting for the unloading to complete,
it returns a different error code (-EBUSY) for modules in the GOING
state. This should avoid the error situation that was described in
6e6de3dee51a (user space attempting to load a dependent module because
the -EEXIST error code would suggest to user space that the first module
had been loaded successfully), while avoiding the delay situation too.

This has been tested on linux-next since December 2022 and passes
all kmod selftests except test 0009 with module compression enabled
but it has been confirmed that this issue has existed and has gone
unnoticed since prior to this commit and can also be reproduced without
module compression with a simple usleep(5000000) on tools/modprobe.c [0].
These failures are caused by hitting the kernel mod_concurrent_max and can
happen either due to a self inflicted kernel module auto-loead DoS somehow
or on a system with large CPU count and each CPU count incorrectly triggering
many module auto-loads. Both of those issues need to be fixed in-kernel.

[0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@xxxxxxxxxxxxxxxxxxxxxx/

Fixes: 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Co-developed-by: Martin Wilck <mwilck@xxxxxxxx>
Signed-off-by: Martin Wilck <mwilck@xxxxxxxx>
Signed-off-by: Petr Pavlu <petr.pavlu@xxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Petr Mladek <pmladek@xxxxxxxx>
[mcgrof: enhance commit log with testing and kmod test result interpretation ]
Signed-off-by: Luis Chamberlain <mcgrof@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 kernel/module.c |   26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3478,7 +3478,8 @@ static bool finished_loading(const char
 	sched_annotate_sleep();
 	mutex_lock(&module_mutex);
 	mod = find_module_all(name, strlen(name), true);
-	ret = !mod || mod->state == MODULE_STATE_LIVE;
+	ret = !mod || mod->state == MODULE_STATE_LIVE
+		|| mod->state == MODULE_STATE_GOING;
 	mutex_unlock(&module_mutex);
 
 	return ret;
@@ -3632,20 +3633,35 @@ static int add_unformed_module(struct mo
 
 	mod->state = MODULE_STATE_UNFORMED;
 
-again:
 	mutex_lock(&module_mutex);
 	old = find_module_all(mod->name, strlen(mod->name), true);
 	if (old != NULL) {
-		if (old->state != MODULE_STATE_LIVE) {
+		if (old->state == MODULE_STATE_COMING
+		    || old->state == MODULE_STATE_UNFORMED) {
 			/* Wait in case it fails to load. */
 			mutex_unlock(&module_mutex);
 			err = wait_event_interruptible(module_wq,
 					       finished_loading(mod->name));
 			if (err)
 				goto out_unlocked;
-			goto again;
+
+			/* The module might have gone in the meantime. */
+			mutex_lock(&module_mutex);
+			old = find_module_all(mod->name, strlen(mod->name),
+					      true);
 		}
-		err = -EEXIST;
+
+		/*
+		 * We are here only when the same module was being loaded. Do
+		 * not try to load it again right now. It prevents long delays
+		 * caused by serialized module load failures. It might happen
+		 * when more devices of the same type trigger load of
+		 * a particular module.
+		 */
+		if (old && old->state == MODULE_STATE_LIVE)
+			err = -EEXIST;
+		else
+			err = -EBUSY;
 		goto out;
 	}
 	mod_update_bounds(mod);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux