[PATCH 6.1 055/313] kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Masahiro Yamada <masahiroy@xxxxxxxxxx>

[ Upstream commit 8debed3efe3a731451ad9a91a7a74eeb18a7f7eb ]

Nathan Chancellor reports that $(NM) emits an error message when
GNU Make 4.4 is used to build the ARM zImage.

  $ make-4.4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- O=build defconfig zImage
    [snip]
    LD      vmlinux
    NM      System.map
    SORTTAB vmlinux
    OBJCOPY arch/arm/boot/Image
    Kernel: arch/arm/boot/Image is ready
  arm-linux-gnueabi-nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file
  /bin/sh: 1: arithmetic expression: expecting primary: " "
    LDS     arch/arm/boot/compressed/vmlinux.lds
    AS      arch/arm/boot/compressed/head.o
    GZIP    arch/arm/boot/compressed/piggy_data
    AS      arch/arm/boot/compressed/piggy.o
    CC      arch/arm/boot/compressed/misc.o

This occurs since GNU Make commit 98da874c4303 ("[SV 10593] Export
variables to $(shell ...) commands"), and the O= option is needed to
reproduce it. The generated zImage is correct despite the error message.

As the commit description of 98da874c4303 [1] says, exported variables
are passed down to $(shell ) functions, which means exported recursive
variables might be expanded earlier than before, in the parse stage.

The following test code demonstrates the change for GNU Make 4.4.

[Test Makefile]

  $(shell echo hello > foo)
  export foo = $(shell cat bar/../foo)
  $(shell mkdir bar)

  all:
          @echo $(foo)

[GNU Make 4.3]

  $ rm -rf bar; make-4.3
  hello

[GNU Make 4.4]

  $ rm -rf bar; make-4.4
  cat: bar/../foo: No such file or directory
  hello

The 'foo' is a resursively expanded (i.e. lazily expanded) variable.

GNU Make 4.3 expands 'foo' just before running the recipe '@echo $(foo)',
at this point, the directory 'bar' exists.

GNU Make 4.4 expands 'foo' to evaluate $(shell mkdir bar) because it is
exported. At this point, the directory 'bar' does not exit yet. The cat
command cannot resolve the bar/../foo path, hence the error message.

Let's get back to the kernel Makefile.

In arch/arm/boot/compressed/Makefile, KBSS_SZ is referenced by
LDFLAGS_vmlinux, which is recursive and also exported by the top
Makefile.

GNU Make 4.3 expands KBSS_SZ just before running the recipes, so no
error message.

GNU Make 4.4 expands KBSS_SZ in the parse stage, where the directory
arm/arm/boot/compressed does not exit yet. When compiled with O=,
the output directory is created by $(shell mkdir -p $(obj-dirs))
in scripts/Makefile.build.

There are two ways to fix this particular issue:

 - change "$(obj)/../../../../vmlinux" in KBSS_SZ to "vmlinux"
 - unexport LDFLAGS_vmlinux

This commit takes the latter course because it is what I originally
intended.

Commit 3ec8a5b33dea ("kbuild: do not export LDFLAGS_vmlinux")
unexported LDFLAGS_vmlinux.

Commit 5d4aeffbf709 ("kbuild: rebuild .vmlinux.export.o when its
prerequisite is updated") accidentally exported it again.

We can clean up arch/arm/boot/compressed/Makefile later.

[1]: https://git.savannah.gnu.org/cgit/make.git/commit/?id=98da874c43035a490cdca81331724f233a3d0c9a

Link: https://lore.kernel.org/all/Y7i8+EjwdnhHtlrr@dev-arch.thelio-3990X/
Fixes: 5d4aeffbf709 ("kbuild: rebuild .vmlinux.export.o when its prerequisite is updated")
Reported-by: Nathan Chancellor <nathan@xxxxxxxxxx>
Signed-off-by: Masahiro Yamada <masahiroy@xxxxxxxxxx>
Reviewed-by: Nicolas Schier <nicolas@xxxxxxxxx>
Tested-by: Nathan Chancellor <nathan@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 Makefile | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 49261450039a..770e509d4da4 100644
--- a/Makefile
+++ b/Makefile
@@ -538,7 +538,7 @@ LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 RUSTFLAGS_KERNEL =
 AFLAGS_KERNEL	=
-export LDFLAGS_vmlinux =
+LDFLAGS_vmlinux =
 
 # Use USERINCLUDE when you must reference the UAPI directories only.
 USERINCLUDE    := \
@@ -1232,6 +1232,18 @@ vmlinux.o modules.builtin.modinfo modules.builtin: vmlinux_o
 	@:
 
 PHONY += vmlinux
+# LDFLAGS_vmlinux in the top Makefile defines linker flags for the top vmlinux,
+# not for decompressors. LDFLAGS_vmlinux in arch/*/boot/compressed/Makefile is
+# unrelated; the decompressors just happen to have the same base name,
+# arch/*/boot/compressed/vmlinux.
+# Export LDFLAGS_vmlinux only to scripts/Makefile.vmlinux.
+#
+# _LDFLAGS_vmlinux is a workaround for the 'private export' bug:
+#   https://savannah.gnu.org/bugs/?61463
+# For Make > 4.4, the following simple code will work:
+#  vmlinux: private export LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
+vmlinux: private _LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
+vmlinux: export LDFLAGS_vmlinux = $(_LDFLAGS_vmlinux)
 vmlinux: vmlinux.o $(KBUILD_LDS) modpost
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux
 
-- 
2.39.0






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux