From: Matthew Howell <matthew.howell@xxxxxxxxxxxx> commit 14ee78d5932afeb710c8305196a676a715bfdea8 upstream. Add support for Sealevel 7xxxC serial cards. This patch: * Adds IDs to recognize 7xxxC cards from Sealevel Systems. * Updates exar_pci_probe() to set nr_ports to last two bytes of primary dev ID for these cards. Signed-off-by: Matthew Howell <matthew.howell@xxxxxxxxxxxx> Cc: stable <stable@xxxxxxxxxx> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/tty/serial/8250/8250_exar.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -43,6 +43,12 @@ #define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358 #define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358 +#define PCI_DEVICE_ID_SEALEVEL_710xC 0x1001 +#define PCI_DEVICE_ID_SEALEVEL_720xC 0x1002 +#define PCI_DEVICE_ID_SEALEVEL_740xC 0x1004 +#define PCI_DEVICE_ID_SEALEVEL_780xC 0x1008 +#define PCI_DEVICE_ID_SEALEVEL_716xC 0x1010 + #define UART_EXAR_INT0 0x80 #define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */ #define UART_EXAR_SLEEP 0x8b /* Sleep mode */ @@ -638,6 +644,8 @@ exar_pci_probe(struct pci_dev *pcidev, c nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1); else if (board->num_ports) nr_ports = board->num_ports; + else if (pcidev->vendor == PCI_VENDOR_ID_SEALEVEL) + nr_ports = pcidev->device & 0xff; else nr_ports = pcidev->device & 0x0f; @@ -864,6 +872,12 @@ static const struct pci_device_id exar_p EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4), EXAR_DEVICE(COMMTECH, 2324PCI335, pbn_fastcom335_4), EXAR_DEVICE(COMMTECH, 2328PCI335, pbn_fastcom335_8), + + EXAR_DEVICE(SEALEVEL, 710xC, pbn_exar_XR17V35x), + EXAR_DEVICE(SEALEVEL, 720xC, pbn_exar_XR17V35x), + EXAR_DEVICE(SEALEVEL, 740xC, pbn_exar_XR17V35x), + EXAR_DEVICE(SEALEVEL, 780xC, pbn_exar_XR17V35x), + EXAR_DEVICE(SEALEVEL, 716xC, pbn_exar_XR17V35x), { 0, } }; MODULE_DEVICE_TABLE(pci, exar_pci_tbl);
