>
>On Thu, Nov 17, 2022 at 8:27 PM Pawel Laszczak <pawell@xxxxxxxxxxx>
>wrote:
>>
>> >
>> >On Tue, Nov 15, 2022 at 6:01 PM Pawel Laszczak <pawell@xxxxxxxxxxx>
>> >wrote:
>> >>
>> >> After doorbell DMA fetches the TRB. If during dequeuing request
>> >> driver changes NORMAL TRB to LINK TRB but doesn't delete it from
>> >> controller cache then controller will handle cached TRB and packet can be
>lost.
>> >>
>> >> The example scenario for this issue looks like:
>> >> 1. queue request - set doorbell
>> >> 2. dequeue request
>> >> 3. send OUT data packet from host
>> >> 4. Device will accept this packet which is unexpected 5. queue new
>> >> request - set doorbell 6. Device lost the expected packet.
>> >>
>> >> By setting DFLUSH controller clears DRDY bit and stop DMA transfer.
>> >>
>> >> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
>> >> cc: <stable@xxxxxxxxxxxxxxx>
>> >> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
>> >> ---
>> >> drivers/usb/cdns3/cdns3-gadget.c | 12 ++++++++++++
>> >> 1 file changed, 12 insertions(+)
>> >>
>> >> diff --git a/drivers/usb/cdns3/cdns3-gadget.c
>> >> b/drivers/usb/cdns3/cdns3-gadget.c
>> >> index 5adcb349718c..ccfaebca6faa 100644
>> >> --- a/drivers/usb/cdns3/cdns3-gadget.c
>> >> +++ b/drivers/usb/cdns3/cdns3-gadget.c
>> >> @@ -2614,6 +2614,7 @@ int cdns3_gadget_ep_dequeue(struct usb_ep
>*ep,
>> >> u8 req_on_hw_ring = 0;
>> >> unsigned long flags;
>> >> int ret = 0;
>> >> + int val;
>> >>
>> >> if (!ep || !request || !ep->desc)
>> >> return -EINVAL;
>> >> @@ -2649,6 +2650,13 @@ int cdns3_gadget_ep_dequeue(struct usb_ep
>> >*ep,
>> >>
>> >> /* Update ring only if removed request is on pending_req_list list */
>> >> if (req_on_hw_ring && link_trb) {
>> >> + /* Stop DMA */
>> >> + writel(EP_CMD_DFLUSH, &priv_dev->regs->ep_cmd);
>> >> +
>> >> + /* wait for DFLUSH cleared */
>> >> + readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
>> >> + !(val & EP_CMD_DFLUSH),
>> >> + 1, 1000);
>> >> +
>> >> link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep-
>> >>trb_pool_dma +
>> >> ((priv_req->end_trb + 1) * TRB_SIZE)));
>> >> link_trb->control =
>> >> cpu_to_le32((le32_to_cpu(link_trb->control) & TRB_CYCLE) | @@
>> >>-2660,6
>> >> +2668,10 @@ int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
>> >>
>> >> cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET);
>> >>
>> >> + req = cdns3_next_request(&priv_ep->pending_req_list);
>> >> + if (req)
>> >> + cdns3_rearm_transfer(priv_ep, 1);
>> >> +
>> >
>> >Why the above changes are needed?
>> >
>>
>> Do you mean the last line or this patch?
>>
>> Last line:
>> DMA is stopped, so driver arm the queued transfers
>>
>
>Sorry, I have been very busy recently, so the response may not be in time.
>I mean why it needs to re-arm the transfers after DMA is stopped?
Because driver can have queued more transfers. Only one of them are
dequeued. In the vast majority of the rest request will be removed in the
next steps, but there can be case in which we have queued e.g. 10 usb requests
and only one of them will be removed. In such case the driver can stuck.
To avoid this driver, rearm the endpoint if there are other transfer
in transfer ring.
Regards,
Pawel
>
>
>> If you means this patch:
>> Issue was detected by customer test. I don’t know whether it was only
>> test or the real application.
>>
>> The problem happens because user application queued the transfer
>> (endpoint has been armed), so controller fetch the TRB.
>> When user application removed this request the TRB was still processed
>> by controller. If at that time the host will send data packet then
>> controller will accept it, but it shouldn't because the usb_request
>> associated with TRB cached by controller was removed.
>> To force the controller to drop this TRB DFLUSH is required.
>>
>> Pawel
>>
>> >
>> >> not_found:
>> >> spin_unlock_irqrestore(&priv_dev->lock, flags);
>> >> return ret;
>> >> --
>> >> 2.25.1
>> >>
