From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
commit e2af60f5900c6ade53477b494ffb54690eee11f5 upstream.
Prior to commit bd5d54e4d49d ("iio: adc128s052: add ACPI _HID
AANT1280"), the driver unconditionally used spi_get_device_id() to get
the index into the adc128_config array.
However, with that commit, OF-based boards now incorrectly treat all
supported sensors as if they are an adc128s052, because all the .data
members of the adc128_of_match table are implicitly 0. Our board,
which has an adc122s021, thus exposes 8 channels whereas it really
only has two.
Fixes: bd5d54e4d49d ("iio: adc128s052: add ACPI _HID AANT1280")
Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20221115132324.1078169-1-linux@xxxxxxxxxxxxxxxxxx
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/iio/adc/ti-adc128s052.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/iio/adc/ti-adc128s052.c
+++ b/drivers/iio/adc/ti-adc128s052.c
@@ -181,13 +181,13 @@ static int adc128_probe(struct spi_devic
}
static const struct of_device_id adc128_of_match[] = {
- { .compatible = "ti,adc128s052", },
- { .compatible = "ti,adc122s021", },
- { .compatible = "ti,adc122s051", },
- { .compatible = "ti,adc122s101", },
- { .compatible = "ti,adc124s021", },
- { .compatible = "ti,adc124s051", },
- { .compatible = "ti,adc124s101", },
+ { .compatible = "ti,adc128s052", .data = (void*)0L, },
+ { .compatible = "ti,adc122s021", .data = (void*)1L, },
+ { .compatible = "ti,adc122s051", .data = (void*)1L, },
+ { .compatible = "ti,adc122s101", .data = (void*)1L, },
+ { .compatible = "ti,adc124s021", .data = (void*)2L, },
+ { .compatible = "ti,adc124s051", .data = (void*)2L, },
+ { .compatible = "ti,adc124s101", .data = (void*)2L, },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, adc128_of_match);
