On Tue, Sep 16, 2014 at 1:21 PM, Joseph Salisbury <joseph.salisbury@xxxxxxxxxxxxx> wrote: > > A new bug[0] was opened due to enabling PCI_REALLOC_ENABLE_AUTO, which > is similar to the original bug[1] we discussed. > > Just wondering if there have been any additional ideas on realloc since > this was last discussed? > > [0] http://pad.lv/1363313 > [1] http://pad.lv/1245938 This one looks different, that LSI card support SRIOV, but BIOS does not allocate resource to SRIOV bar. We release old resource and ...reallocate resource to them with two retries. [ 0.321983] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 [ 0.322010] pci 0000:00:03.0: BAR 15: assigned [mem 0xef800000-0xef8fffff pref] [ 0.322025] pci 0000:01:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.322033] pci 0000:01:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.322040] pci 0000:01:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.322042] pci 0000:01:00.0: BAR 6: assigned [mem 0xef800000-0xef87ffff pref] [ 0.322051] pci 0000:01:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.322053] pci 0000:01:00.0: BAR 9: can't assign mem (size 0x400000) [ 0.322061] pci 0000:01:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.322063] pci 0000:01:00.0: BAR 7: assigned [mem 0xfbd00000-0xfbd3ffff 64bit] [ 0.322070] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.322073] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.322077] pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.322080] pci 0000:00:03.0: bridge window [mem 0xef800000-0xef8fffff pref] [ 0.322142] pci_bus 0000:00: No. 2 try to assign unassigned res [ 0.322143] release child resource [mem 0xfbd00000-0xfbd3ffff 64bit] [ 0.322144] release child resource [mem 0xfbd80000-0xfbdbffff 64bit] [ 0.322145] release child resource [mem 0xfbdfc000-0xfbdfffff 64bit] [ 0.322147] pci 0000:00:03.0: resource 14 [mem 0xfbd00000-0xfbdfffff] released [ 0.322148] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.322156] pci 0000:00:03.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01] add_size 500000 [ 0.322174] pci 0000:00:03.0: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 500000 [ 0.322176] pci 0000:00:03.0: BAR 14: assigned [mem 0xefb00000-0xf00fffff] [ 0.322185] pci 0000:01:00.0: reg 0x174: [mem 0xfbd00000-0xfbd03fff 64bit] [ 0.322192] pci 0000:01:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.322194] pci 0000:01:00.0: res[9]=[mem 0x00000000-0xffffffffffffffff 64bit] get_res_add_size add_size 400000 [ 0.322196] pci 0000:01:00.0: res[7]=[mem 0x00000000-0xffffffffffffffff 64bit] get_res_add_size add_size 40000 [ 0.322198] pci 0000:01:00.0: BAR 3: assigned [mem 0xefb00000-0xefb3ffff 64bit] [ 0.322211] pci 0000:01:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.322212] pci 0000:01:00.0: BAR 9: assigned [mem 0xefb40000-0xeff3ffff 64bit] [ 0.322219] pci 0000:01:00.0: BAR 1: assigned [mem 0xeff40000-0xeff43fff 64bit] [ 0.322232] pci 0000:01:00.0: reg 0x174: [mem 0xfbd00000-0xfbd03fff 64bit] [ 0.322234] pci 0000:01:00.0: BAR 7: assigned [mem 0xeff44000-0xeff83fff 64bit] [ 0.322241] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.322244] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.322248] pci 0000:00:03.0: bridge window [mem 0xefb00000-0xf00fffff] [ 0.322251] pci 0000:00:03.0: bridge window [mem 0xef800000-0xef8fffff 64bit pref] So the resource realloc do work as expected. but LSI firmware has some problem again? We may need to add command after the reset the bridge resource. Can you get bootlog with "pci=earlydump"? Thanks Yinghai -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html