From: Wang Yufen <wangyufen@xxxxxxxxxx> [ Upstream commit 98af3746026c3eccb51b43181c41e001fe73f7af ] After commit afef88e65554 ("selftests/bpf: Store BPF object files with .bpf.o extension"), we should use *.bpf.o instead of *.o. In addition, use the BPF_FILE variable to save the BPF object file name, which can be better identified and modified. Fixes: afef88e65554 ("selftests/bpf: Store BPF object files with .bpf.o extension") Signed-off-by: Wang Yufen <wangyufen@xxxxxxxxxx> Acked-by: Stanislav Fomichev <sdf@xxxxxxxxxx> Link: https://lore.kernel.org/r/1666235134-562-1-git-send-email-wangyufen@xxxxxxxxxx Signed-off-by: Alexei Starovoitov <ast@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- .../selftests/bpf/test_bpftool_metadata.sh | 7 +++++-- .../selftests/bpf/test_flow_dissector.sh | 6 ++++-- .../testing/selftests/bpf/test_lwt_ip_encap.sh | 17 +++++++++-------- .../testing/selftests/bpf/test_lwt_seg6local.sh | 9 +++++---- tools/testing/selftests/bpf/test_tc_edt.sh | 3 ++- tools/testing/selftests/bpf/test_tc_tunnel.sh | 5 +++-- tools/testing/selftests/bpf/test_tunnel.sh | 5 +++-- tools/testing/selftests/bpf/test_xdp_meta.sh | 9 +++++---- tools/testing/selftests/bpf/test_xdp_vlan.sh | 8 ++++---- 9 files changed, 40 insertions(+), 29 deletions(-) diff --git a/tools/testing/selftests/bpf/test_bpftool_metadata.sh b/tools/testing/selftests/bpf/test_bpftool_metadata.sh index 1bf81b49457a..b5520692f41b 100755 --- a/tools/testing/selftests/bpf/test_bpftool_metadata.sh +++ b/tools/testing/selftests/bpf/test_bpftool_metadata.sh @@ -4,6 +4,9 @@ # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +BPF_FILE_USED="metadata_used.bpf.o" +BPF_FILE_UNUSED="metadata_unused.bpf.o" + TESTNAME=bpftool_metadata BPF_FS=$(awk '$3 == "bpf" {print $2; exit}' /proc/mounts) BPF_DIR=$BPF_FS/test_$TESTNAME @@ -55,7 +58,7 @@ mkdir $BPF_DIR trap cleanup EXIT -bpftool prog load metadata_unused.o $BPF_DIR/unused +bpftool prog load $BPF_FILE_UNUSED $BPF_DIR/unused METADATA_PLAIN="$(bpftool prog)" echo "$METADATA_PLAIN" | grep 'a = "foo"' > /dev/null @@ -67,7 +70,7 @@ bpftool map | grep 'metadata.rodata' > /dev/null rm $BPF_DIR/unused -bpftool prog load metadata_used.o $BPF_DIR/used +bpftool prog load $BPF_FILE_USED $BPF_DIR/used METADATA_PLAIN="$(bpftool prog)" echo "$METADATA_PLAIN" | grep 'a = "bar"' > /dev/null diff --git a/tools/testing/selftests/bpf/test_flow_dissector.sh b/tools/testing/selftests/bpf/test_flow_dissector.sh index 5303ce0c977b..4b298863797a 100755 --- a/tools/testing/selftests/bpf/test_flow_dissector.sh +++ b/tools/testing/selftests/bpf/test_flow_dissector.sh @@ -2,6 +2,8 @@ # SPDX-License-Identifier: GPL-2.0 # # Load BPF flow dissector and verify it correctly dissects traffic + +BPF_FILE="bpf_flow.bpf.o" export TESTNAME=test_flow_dissector unmount=0 @@ -22,7 +24,7 @@ if [[ -z $(ip netns identify $$) ]]; then if bpftool="$(which bpftool)"; then echo "Testing global flow dissector..." - $bpftool prog loadall ./bpf_flow.o /sys/fs/bpf/flow \ + $bpftool prog loadall $BPF_FILE /sys/fs/bpf/flow \ type flow_dissector if ! unshare --net $bpftool prog attach pinned \ @@ -95,7 +97,7 @@ else fi # Attach BPF program -./flow_dissector_load -p bpf_flow.o -s _dissect +./flow_dissector_load -p $BPF_FILE -s _dissect # Setup tc qdisc add dev lo ingress diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh index 6c69c42b1d60..1e565f47aca9 100755 --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh +++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh @@ -38,6 +38,7 @@ # ping: SRC->[encap at veth2:ingress]->GRE:decap->DST # ping replies go DST->SRC directly +BPF_FILE="test_lwt_ip_encap.bpf.o" if [[ $EUID -ne 0 ]]; then echo "This script must be run as root" echo "FAIL" @@ -373,14 +374,14 @@ test_egress() # install replacement routes (LWT/eBPF), pings succeed if [ "${ENCAP}" == "IPv4" ] ; then ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - test_lwt_ip_encap.o sec encap_gre dev veth1 ${VRF} + ${BPF_FILE} sec encap_gre dev veth1 ${VRF} ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - test_lwt_ip_encap.o sec encap_gre dev veth1 ${VRF} + ${BPF_FILE} sec encap_gre dev veth1 ${VRF} elif [ "${ENCAP}" == "IPv6" ] ; then ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - test_lwt_ip_encap.o sec encap_gre6 dev veth1 ${VRF} + ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF} ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - test_lwt_ip_encap.o sec encap_gre6 dev veth1 ${VRF} + ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF} else echo " unknown encap ${ENCAP}" TEST_STATUS=1 @@ -431,14 +432,14 @@ test_ingress() # install replacement routes (LWT/eBPF), pings succeed if [ "${ENCAP}" == "IPv4" ] ; then ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - test_lwt_ip_encap.o sec encap_gre dev veth2 ${VRF} + ${BPF_FILE} sec encap_gre dev veth2 ${VRF} ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - test_lwt_ip_encap.o sec encap_gre dev veth2 ${VRF} + ${BPF_FILE} sec encap_gre dev veth2 ${VRF} elif [ "${ENCAP}" == "IPv6" ] ; then ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - test_lwt_ip_encap.o sec encap_gre6 dev veth2 ${VRF} + ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF} ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - test_lwt_ip_encap.o sec encap_gre6 dev veth2 ${VRF} + ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF} else echo "FAIL: unknown encap ${ENCAP}" TEST_STATUS=1 diff --git a/tools/testing/selftests/bpf/test_lwt_seg6local.sh b/tools/testing/selftests/bpf/test_lwt_seg6local.sh index 826f4423ce02..0efea2292d6a 100755 --- a/tools/testing/selftests/bpf/test_lwt_seg6local.sh +++ b/tools/testing/selftests/bpf/test_lwt_seg6local.sh @@ -23,6 +23,7 @@ # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +BPF_FILE="test_lwt_seg6local.bpf.o" readonly NS1="ns1-$(mktemp -u XXXXXX)" readonly NS2="ns2-$(mktemp -u XXXXXX)" readonly NS3="ns3-$(mktemp -u XXXXXX)" @@ -117,18 +118,18 @@ ip netns exec ${NS6} ip -6 addr add fb00::109/16 dev veth10 scope link ip netns exec ${NS1} ip -6 addr add fb00::1/16 dev lo ip netns exec ${NS1} ip -6 route add fb00::6 dev veth1 via fb00::21 -ip netns exec ${NS2} ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2 +ip netns exec ${NS2} ip -6 route add fb00::6 encap bpf in obj ${BPF_FILE} sec encap_srh dev veth2 ip netns exec ${NS2} ip -6 route add fd00::1 dev veth3 via fb00::43 scope link ip netns exec ${NS3} ip -6 route add fc42::1 dev veth5 via fb00::65 -ip netns exec ${NS3} ip -6 route add fd00::1 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec add_egr_x dev veth4 +ip netns exec ${NS3} ip -6 route add fd00::1 encap seg6local action End.BPF endpoint obj ${BPF_FILE} sec add_egr_x dev veth4 -ip netns exec ${NS4} ip -6 route add fd00::2 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec pop_egr dev veth6 +ip netns exec ${NS4} ip -6 route add fd00::2 encap seg6local action End.BPF endpoint obj ${BPF_FILE} sec pop_egr dev veth6 ip netns exec ${NS4} ip -6 addr add fc42::1 dev lo ip netns exec ${NS4} ip -6 route add fd00::3 dev veth7 via fb00::87 ip netns exec ${NS5} ip -6 route add fd00::4 table 117 dev veth9 via fb00::109 -ip netns exec ${NS5} ip -6 route add fd00::3 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec inspect_t dev veth8 +ip netns exec ${NS5} ip -6 route add fd00::3 encap seg6local action End.BPF endpoint obj ${BPF_FILE} sec inspect_t dev veth8 ip netns exec ${NS6} ip -6 addr add fb00::6/16 dev lo ip netns exec ${NS6} ip -6 addr add fd00::4/16 dev lo diff --git a/tools/testing/selftests/bpf/test_tc_edt.sh b/tools/testing/selftests/bpf/test_tc_edt.sh index daa7d1b8d309..76f0bd17061f 100755 --- a/tools/testing/selftests/bpf/test_tc_edt.sh +++ b/tools/testing/selftests/bpf/test_tc_edt.sh @@ -5,6 +5,7 @@ # with dst port = 9000 down to 5MBps. Then it measures actual # throughput of the flow. +BPF_FILE="test_tc_edt.bpf.o" if [[ $EUID -ne 0 ]]; then echo "This script must be run as root" echo "FAIL" @@ -54,7 +55,7 @@ ip -netns ${NS_DST} route add ${IP_SRC}/32 dev veth_dst ip netns exec ${NS_SRC} tc qdisc add dev veth_src root fq ip netns exec ${NS_SRC} tc qdisc add dev veth_src clsact ip netns exec ${NS_SRC} tc filter add dev veth_src egress \ - bpf da obj test_tc_edt.o sec cls_test + bpf da obj ${BPF_FILE} sec cls_test # start the listener diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh index 088fcad138c9..334bdfeab940 100755 --- a/tools/testing/selftests/bpf/test_tc_tunnel.sh +++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh @@ -3,6 +3,7 @@ # # In-place tunneling +BPF_FILE="test_tc_tunnel.bpf.o" # must match the port that the bpf program filters on readonly port=8000 @@ -196,7 +197,7 @@ verify_data # client can no longer connect ip netns exec "${ns1}" tc qdisc add dev veth1 clsact ip netns exec "${ns1}" tc filter add dev veth1 egress \ - bpf direct-action object-file ./test_tc_tunnel.o \ + bpf direct-action object-file ${BPF_FILE} \ section "encap_${tuntype}_${mac}" echo "test bpf encap without decap (expect failure)" server_listen @@ -296,7 +297,7 @@ fi ip netns exec "${ns2}" ip link del dev testtun0 ip netns exec "${ns2}" tc qdisc add dev veth2 clsact ip netns exec "${ns2}" tc filter add dev veth2 ingress \ - bpf direct-action object-file ./test_tc_tunnel.o section decap + bpf direct-action object-file ${BPF_FILE} section decap echo "test bpf encap with bpf decap" client_connect verify_data diff --git a/tools/testing/selftests/bpf/test_tunnel.sh b/tools/testing/selftests/bpf/test_tunnel.sh index e9ebc67d73f7..2eaedc1d9ed3 100755 --- a/tools/testing/selftests/bpf/test_tunnel.sh +++ b/tools/testing/selftests/bpf/test_tunnel.sh @@ -45,6 +45,7 @@ # 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet # 6) Forward the packet to the overlay tnl dev +BPF_FILE="test_tunnel_kern.bpf.o" BPF_PIN_TUNNEL_DIR="/sys/fs/bpf/tc/tunnel" PING_ARG="-c 3 -w 10 -q" ret=0 @@ -545,7 +546,7 @@ test_xfrm_tunnel() > /sys/kernel/debug/tracing/trace setup_xfrm_tunnel mkdir -p ${BPF_PIN_TUNNEL_DIR} - bpftool prog loadall ./test_tunnel_kern.o ${BPF_PIN_TUNNEL_DIR} + bpftool prog loadall ${BPF_FILE} ${BPF_PIN_TUNNEL_DIR} tc qdisc add dev veth1 clsact tc filter add dev veth1 proto ip ingress bpf da object-pinned \ ${BPF_PIN_TUNNEL_DIR}/xfrm_get_state @@ -572,7 +573,7 @@ attach_bpf() SET=$2 GET=$3 mkdir -p ${BPF_PIN_TUNNEL_DIR} - bpftool prog loadall ./test_tunnel_kern.o ${BPF_PIN_TUNNEL_DIR}/ + bpftool prog loadall ${BPF_FILE} ${BPF_PIN_TUNNEL_DIR}/ tc qdisc add dev $DEV clsact tc filter add dev $DEV egress bpf da object-pinned ${BPF_PIN_TUNNEL_DIR}/$SET tc filter add dev $DEV ingress bpf da object-pinned ${BPF_PIN_TUNNEL_DIR}/$GET diff --git a/tools/testing/selftests/bpf/test_xdp_meta.sh b/tools/testing/selftests/bpf/test_xdp_meta.sh index ea69370caae3..2740322c1878 100755 --- a/tools/testing/selftests/bpf/test_xdp_meta.sh +++ b/tools/testing/selftests/bpf/test_xdp_meta.sh @@ -1,5 +1,6 @@ #!/bin/sh +BPF_FILE="test_xdp_meta.bpf.o" # Kselftest framework requirement - SKIP code is 4. readonly KSFT_SKIP=4 readonly NS1="ns1-$(mktemp -u XXXXXX)" @@ -42,11 +43,11 @@ ip netns exec ${NS2} ip addr add 10.1.1.22/24 dev veth2 ip netns exec ${NS1} tc qdisc add dev veth1 clsact ip netns exec ${NS2} tc qdisc add dev veth2 clsact -ip netns exec ${NS1} tc filter add dev veth1 ingress bpf da obj test_xdp_meta.o sec t -ip netns exec ${NS2} tc filter add dev veth2 ingress bpf da obj test_xdp_meta.o sec t +ip netns exec ${NS1} tc filter add dev veth1 ingress bpf da obj ${BPF_FILE} sec t +ip netns exec ${NS2} tc filter add dev veth2 ingress bpf da obj ${BPF_FILE} sec t -ip netns exec ${NS1} ip link set dev veth1 xdp obj test_xdp_meta.o sec x -ip netns exec ${NS2} ip link set dev veth2 xdp obj test_xdp_meta.o sec x +ip netns exec ${NS1} ip link set dev veth1 xdp obj ${BPF_FILE} sec x +ip netns exec ${NS2} ip link set dev veth2 xdp obj ${BPF_FILE} sec x ip netns exec ${NS1} ip link set dev veth1 up ip netns exec ${NS2} ip link set dev veth2 up diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh b/tools/testing/selftests/bpf/test_xdp_vlan.sh index 810c407e0286..fbcaa9f0120b 100755 --- a/tools/testing/selftests/bpf/test_xdp_vlan.sh +++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh @@ -200,11 +200,11 @@ ip netns exec ${NS2} sh -c 'ping -W 1 -c 1 100.64.41.1 || echo "Success: First p # ---------------------------------------------------------------------- # In ns1: ingress use XDP to remove VLAN tags export DEVNS1=veth1 -export FILE=test_xdp_vlan.o +export BPF_FILE=test_xdp_vlan.bpf.o # First test: Remove VLAN by setting VLAN ID 0, using "xdp_vlan_change" export XDP_PROG=xdp_vlan_change -ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $FILE section $XDP_PROG +ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $BPF_FILE section $XDP_PROG # In ns1: egress use TC to add back VLAN tag 4011 # (del cmd) @@ -212,7 +212,7 @@ ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $FILE section $XDP_PRO # ip netns exec ${NS1} tc qdisc add dev $DEVNS1 clsact ip netns exec ${NS1} tc filter add dev $DEVNS1 egress \ - prio 1 handle 1 bpf da obj $FILE sec tc_vlan_push + prio 1 handle 1 bpf da obj $BPF_FILE sec tc_vlan_push # Now the namespaces can reach each-other, test with ping: ip netns exec ${NS2} ping -i 0.2 -W 2 -c 2 $IPADDR1 @@ -226,7 +226,7 @@ ip netns exec ${NS1} ping -i 0.2 -W 2 -c 2 $IPADDR2 # export XDP_PROG=xdp_vlan_remove_outer2 ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE off -ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $FILE section $XDP_PROG +ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $BPF_FILE section $XDP_PROG # Now the namespaces should still be able reach each-other, test with ping: ip netns exec ${NS2} ping -i 0.2 -W 2 -c 2 $IPADDR1 -- 2.35.1