From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
[ Upstream commit 64416ef0b0c4d73349035d1b3206eed3d2047ee0 ]
As serial communication requires a clean clock signal, the Serial
Communication Interfaces with FIFO (SCIF) are clocked by a clock that is
not affected by Spread Spectrum or Fractional Multiplication.
Hence change the clock input for the SCIF Baud Rate Generator internal
clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the
same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81.
Fixes: c62331e8222f ("arm64: dts: renesas: Add Renesas R8A779F0 SoC support")
Fixes: 40753144256b ("arm64: dts: renesas: r8a779f0: Add SCIF nodes")
Reported-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20221103143440.46449-5-wsa+renesas@xxxxxxxxxxxxxxxxxxxx
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index 6ee5f0a54b13..d4f3ebfe841a 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -522,7 +522,7 @@ scif0: serial@e6e60000 {
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>,
- <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+ <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x51>, <&dmac0 0x50>,
@@ -539,7 +539,7 @@ scif1: serial@e6e68000 {
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>,
- <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+ <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x53>, <&dmac0 0x52>,
@@ -556,7 +556,7 @@ scif3: serial@e6c50000 {
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>,
- <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+ <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x57>, <&dmac0 0x56>,
@@ -573,7 +573,7 @@ scif4: serial@e6c40000 {
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 705>,
- <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+ <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x59>, <&dmac0 0x58>,
--
2.35.1
