From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
[ Upstream commit a4290d407aa9fd174d8053878783d466d3124e38 ]
As serial communication requires a clock signal, the High Speed Serial
Communication Interfaces with FIFO (HSCIF) are clocked by a clock that
is not affected by Spread Spectrum or Fractional Multiplication.
Hence change the clock input for the HSCIF0 Baud Rate Generator internal
clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the
same clock rate), cfr. R-Car V4H Hardware User's Manual rev. 0.54.
Fixes: 987da486d84a5643 ("arm64: dts: renesas: Add Renesas R8A779G0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/a5bd4148f92806f7c8e577d383370f810315f586.1665155947.git.geert+renesas@xxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 1c15726cff8b..4bd3cb107b38 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -87,7 +87,7 @@ hscif0: serial@e6540000 {
reg = <0 0xe6540000 0 96>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 514>,
- <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>,
+ <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
--
2.35.1
