From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
[ Upstream commit 59e787935cfe6f562fbb9117e2df4076eaf810d8 ]
The Trogdor Homestar DTSI adds additional GPIO52 pin to secondary I2S pins
("sec_mi2s_active") and configures it to "mi2s_1" function.
The Trogdor DTSI (which is included by Homestar) configures drive
strength and bias for all "sec_mi2s_active" pins, thus the intention was
to apply this configuration also to GPIO52 on Homestar.
Reported-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Fixes: be0416a3f917 ("arm64: dts: qcom: Add sc7180-trogdor-homestar")
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20221020225135.31750-2-krzysztof.kozlowski@xxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index 1bd6c7dcd9e9..bfab67f4a7c9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -194,6 +194,12 @@ pinmux {
pins = "gpio49", "gpio50", "gpio51", "gpio52";
function = "mi2s_1";
};
+
+ pinconf {
+ pins = "gpio49", "gpio50", "gpio51", "gpio52";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
};
&ts_reset_l {
--
2.35.1
