On Tue, Dec 27, 2022 at 04:25:01PM +0200, Laurent Pinchart wrote:
> Hi Ricardo,
>
> Thank you for the patch.
>
> On Wed, Dec 14, 2022 at 05:31:55PM +0100, Ricardo Ribalda wrote:
> > usb_kill_urb warranties that all the handlers are finished when it
> > returns, but does not protect against threads that might be handling
> > asynchronously the urb.
> >
> > For UVC, the function uvc_ctrl_status_event_async() takes care of
> > control changes asynchronously.
> >
> > If the code is executed in the following order:
> >
> > CPU 0 CPU 1
> > ===== =====
> > uvc_status_complete()
> > uvc_status_stop()
> > uvc_ctrl_status_event_work()
> > uvc_status_start() -> FAIL
> >
> > Then uvc_status_start will keep failing and this error will be shown:
> >
> > <4>[ 5.540139] URB 0000000000000000 submitted while active
> > drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528
> >
> > Let's improve the current situation, by not re-submiting the urb if
> > we are stopping the status event. Also process the queued work
> > (if any) during stop.
> >
> > CPU 0 CPU 1
> > ===== =====
> > uvc_status_complete()
> > uvc_status_stop()
> > uvc_status_start()
> > uvc_ctrl_status_event_work() -> FAIL
> >
> > Hopefully, with the usb layer protection this should be enough to cover
> > all the cases.
> >
> > Cc: stable@xxxxxxxxxxxxxxx
> > Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
> > Reviewed-by: Yunke Cao <yunkec@xxxxxxxxxxxx>
> > Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> > ---
> > uvc: Fix race condition on uvc
> >
> > Make sure that all the async work is finished when we stop the status urb.
> >
> > To: Yunke Cao <yunkec@xxxxxxxxxxxx>
> > To: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
> > To: Max Staudt <mstaudt@xxxxxxxxxx>
> > To: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > To: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> > Cc: linux-media@xxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > ---
> > Changes in v4:
> > - Replace bool with atomic_t to avoid compiler reordering
> > - First complete the async work and then kill the urb to avoid race (Thanks Laurent!)
> > - Link to v3: https://lore.kernel.org/r/20221212-uvc-race-v3-0-954efc752c9a@xxxxxxxxxxxx
> >
> > Changes in v3:
> > - Remove the patch for dev->status, makes more sense in another series, and makes
> > the zero day less nervous.
> > - Update reviewed-by (thanks Yunke!).
> > - Link to v2: https://lore.kernel.org/r/20221212-uvc-race-v2-0-54496cc3b8ab@xxxxxxxxxxxx
> >
> > Changes in v2:
> > - Add a patch for not kalloc dev->status
> > - Redo the logic mechanism, so it also works with suspend (Thanks Yunke!)
> > - Link to v1: https://lore.kernel.org/r/20221212-uvc-race-v1-0-c52e1783c31d@xxxxxxxxxxxx
> > ---
> > drivers/media/usb/uvc/uvc_ctrl.c | 3 +++
> > drivers/media/usb/uvc/uvc_status.c | 6 ++++++
> > drivers/media/usb/uvc/uvcvideo.h | 1 +
> > 3 files changed, 10 insertions(+)
> >
> > diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
> > index c95a2229f4fa..1be6897a7d6d 100644
> > --- a/drivers/media/usb/uvc/uvc_ctrl.c
> > +++ b/drivers/media/usb/uvc/uvc_ctrl.c
> > @@ -1442,6 +1442,9 @@ static void uvc_ctrl_status_event_work(struct work_struct *work)
> >
> > uvc_ctrl_status_event(w->chain, w->ctrl, w->data);
> >
> > + if (atomic_read(&dev->flush_status))
> > + return;
> > +
> > /* Resubmit the URB. */
> > w->urb->interval = dev->int_ep->desc.bInterval;
> > ret = usb_submit_urb(w->urb, GFP_KERNEL);
> > diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
> > index 7518ffce22ed..4a95850cdc1b 100644
> > --- a/drivers/media/usb/uvc/uvc_status.c
> > +++ b/drivers/media/usb/uvc/uvc_status.c
> > @@ -304,10 +304,16 @@ int uvc_status_start(struct uvc_device *dev, gfp_t flags)
> > if (dev->int_urb == NULL)
> > return 0;
> >
> > + atomic_set(&dev->flush_status, 0);
> > return usb_submit_urb(dev->int_urb, flags);
> > }
> >
> > void uvc_status_stop(struct uvc_device *dev)
> > {
> > + struct uvc_ctrl_work *w = &dev->async_ctrl;
> > +
> > + atomic_set(&dev->flush_status, 1);
>
> Note that atomic_read() and atomic_set() do no imply any memory barrier
> on most architectures, as far as I can tell. They essentially become
> READ_ONCE() and WRITE_ONCE() calls, which guarantee that the compiler
> will not merge or split loads or stores, or reorder them with respect to
> load and stores to the *same* memory location, but nothing else. I think
> you need to add proper barriers, and you can then probably also drop
> usage of atomic_t.
>
> > + if (cancel_work_sync(&w->work))
> > + uvc_ctrl_status_event(w->chain, w->ctrl, w->data);
> > usb_kill_urb(dev->int_urb);
>
> This should get rid of the main race (possibly save the barrier issue),
> but it's not the most efficient option, and can still be problematic.
> Consider the following case:
>
> CPU0 CPU1
> ---- ----
>
> void uvc_status_stop(struct uvc_device *dev) uvc_ctrl_status_event_async()
> { {
> ...
> atomic_set(&dev->flush_status, 1); ...
> if (cancel_work_sync())
> ...
> schedule_work();
> usb_kill_urb(); }
> }
>
> The usb_kill_urb() call ensures that uvc_ctrl_status_event_async()
> completes before uvc_status_stop() returns, but there will still be work
> scheduled in that case. uvc_ctrl_status_event_work() will be run later,
> and as flush_status is set to 1, the function will not resubmit the URB.
> That fixes the main race, but leaves the asynchronous control status
> event handling for after uvc_status_stop() returns, which isn't great.
>
> Now, if we consider that uvc_status_start() could be called shortly
> after uvc_status_stop(), we may get in a situation where
> uvc_status_start() will reset flush_status to 0 before
> uvc_ctrl_status_event_async() runs. Both uvc_ctrl_status_event_async()
> and uvc_status_start() will thus submit the same URB.
>
> You can't fix this by first killing the URB and then cancelling the
> work, as there would then be a risk that uvc_ctrl_status_event_work()
> would be running in parallel, going past the flush_status check before
> flush_status gets set to 1 in uvc_status_stop(), and submitting the URB
> after usb_kill_urb() is called.
>
> I think a good fix would be to check flush_status in
> uvc_ctrl_status_event_async() and avoid the schedule_work() call in that
> case. You could then also move the atomic_set(..., 0) call from
> uvc_status_start() to the end of uvc_status_stop() (again with proper
> barriers).
Also, as all of this is tricky, comments in appropriate places in the
code would be very helpful to avoid breaking things later.
> Could you please check the memory barriers and test the above proposal
> (after double-checking it of course, I may have missed something) ?
>
> > }
> > diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> > index df93db259312..1274691f157f 100644
> > --- a/drivers/media/usb/uvc/uvcvideo.h
> > +++ b/drivers/media/usb/uvc/uvcvideo.h
> > @@ -560,6 +560,7 @@ struct uvc_device {
> > struct usb_host_endpoint *int_ep;
> > struct urb *int_urb;
> > u8 *status;
> > + atomic_t flush_status;
> > struct input_dev *input;
> > char input_phys[64];
> >
--
Regards,
Laurent Pinchart
