Re: [PATCH AUTOSEL 6.1 8/9] arm64: dts: allwinner: h616: Add USB nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



在 2022-12-20星期二的 00:01 +0000,Andre Przywara写道:
> On Fri, 16 Dec 2022 19:09:35 -0500
> Sasha Levin <sashal@xxxxxxxxxx> wrote:
> 
> > From: Andre Przywara <andre.przywara@xxxxxxx>
> > 
> > [ Upstream commit f40cf244c3feb4e1a442f8029b691add2c65b3ab ]
> 
> This is not really a backport candidate:
> - This is not a fix, but a new feature.
> - This relies on the H616 USB PHY support patch, which will be only
> in
>   v6.2 (and won't be backported).
> - DT backports are generally not useful to begin with, and should
>   actually not be necessary anyway.

DT changes include fixes and new features. New features are not useful,
but fixes are useful.

This specific change is a new feature one, not a fix one though.

> 
> Cheers,
> Andre
> 
> > 
> > Add the nodes for the MUSB and the four USB host controllers to the
> > SoC
> > .dtsi, along with the PHY node needed to bind all of them together.
> > 
> > EHCI/OHCI and MUSB are compatible to previous SoCs, but the PHY
> > requires
> > some quirks (handled in the driver).
> > 
> > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> > Reviewed-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
> > Link:
> > https://lore.kernel.org/r/20221031111358.3387297-6-andre.przywara@xxxxxxx
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
> > Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
> > ---
> >  .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160
> > ++++++++++++++++++
> >  1 file changed, 160 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> > b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> > index 622a1f7d1641..74aed0d232a9 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> > @@ -504,6 +504,166 @@ mdio0: mdio {
> >                         };
> >                 };
> >  
> > +               usbotg: usb@5100000 {
> > +                       compatible = "allwinner,sun50i-h616-musb",
> > +                                    "allwinner,sun8i-h3-musb";
> > +                       reg = <0x05100000 0x0400>;
> > +                       clocks = <&ccu CLK_BUS_OTG>;
> > +                       resets = <&ccu RST_BUS_OTG>;
> > +                       interrupts = <GIC_SPI 25
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                       interrupt-names = "mc";
> > +                       phys = <&usbphy 0>;
> > +                       phy-names = "usb";
> > +                       extcon = <&usbphy 0>;
> > +                       status = "disabled";
> > +               };
> > +
> > +               usbphy: phy@5100400 {
> > +                       compatible = "allwinner,sun50i-h616-usb-
> > phy";
> > +                       reg = <0x05100400 0x24>,
> > +                             <0x05101800 0x14>,
> > +                             <0x05200800 0x14>,
> > +                             <0x05310800 0x14>,
> > +                             <0x05311800 0x14>;
> > +                       reg-names = "phy_ctrl",
> > +                                   "pmu0",
> > +                                   "pmu1",
> > +                                   "pmu2",
> > +                                   "pmu3";
> > +                       clocks = <&ccu CLK_USB_PHY0>,
> > +                                <&ccu CLK_USB_PHY1>,
> > +                                <&ccu CLK_USB_PHY2>,
> > +                                <&ccu CLK_USB_PHY3>,
> > +                                <&ccu CLK_BUS_EHCI2>;
> > +                       clock-names = "usb0_phy",
> > +                                     "usb1_phy",
> > +                                     "usb2_phy",
> > +                                     "usb3_phy",
> > +                                     "pmu2_clk";
> > +                       resets = <&ccu RST_USB_PHY0>,
> > +                                <&ccu RST_USB_PHY1>,
> > +                                <&ccu RST_USB_PHY2>,
> > +                                <&ccu RST_USB_PHY3>;
> > +                       reset-names = "usb0_reset",
> > +                                     "usb1_reset",
> > +                                     "usb2_reset",
> > +                                     "usb3_reset";
> > +                       status = "disabled";
> > +                       #phy-cells = <1>;
> > +               };
> > +
> > +               ehci0: usb@5101000 {
> > +                       compatible = "allwinner,sun50i-h616-ehci",
> > +                                    "generic-ehci";
> > +                       reg = <0x05101000 0x100>;
> > +                       interrupts = <GIC_SPI 26
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_OHCI0>,
> > +                                <&ccu CLK_BUS_EHCI0>,
> > +                                <&ccu CLK_USB_OHCI0>;
> > +                       resets = <&ccu RST_BUS_OHCI0>,
> > +                                <&ccu RST_BUS_EHCI0>;
> > +                       phys = <&usbphy 0>;
> > +                       phy-names = "usb";
> > +                       status = "disabled";
> > +               };
> > +
> > +               ohci0: usb@5101400 {
> > +                       compatible = "allwinner,sun50i-h616-ohci",
> > +                                    "generic-ohci";
> > +                       reg = <0x05101400 0x100>;
> > +                       interrupts = <GIC_SPI 27
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_OHCI0>,
> > +                                <&ccu CLK_USB_OHCI0>;
> > +                       resets = <&ccu RST_BUS_OHCI0>;
> > +                       phys = <&usbphy 0>;
> > +                       phy-names = "usb";
> > +                       status = "disabled";
> > +               };
> > +
> > +               ehci1: usb@5200000 {
> > +                       compatible = "allwinner,sun50i-h616-ehci",
> > +                                    "generic-ehci";
> > +                       reg = <0x05200000 0x100>;
> > +                       interrupts = <GIC_SPI 28
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_OHCI1>,
> > +                                <&ccu CLK_BUS_EHCI1>,
> > +                                <&ccu CLK_USB_OHCI1>;
> > +                       resets = <&ccu RST_BUS_OHCI1>,
> > +                                <&ccu RST_BUS_EHCI1>;
> > +                       phys = <&usbphy 1>;
> > +                       phy-names = "usb";
> > +                       status = "disabled";
> > +               };
> > +
> > +               ohci1: usb@5200400 {
> > +                       compatible = "allwinner,sun50i-h616-ohci",
> > +                                    "generic-ohci";
> > +                       reg = <0x05200400 0x100>;
> > +                       interrupts = <GIC_SPI 29
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_OHCI1>,
> > +                                <&ccu CLK_USB_OHCI1>;
> > +                       resets = <&ccu RST_BUS_OHCI1>;
> > +                       phys = <&usbphy 1>;
> > +                       phy-names = "usb";
> > +                       status = "disabled";
> > +               };
> > +
> > +               ehci2: usb@5310000 {
> > +                       compatible = "allwinner,sun50i-h616-ehci",
> > +                                    "generic-ehci";
> > +                       reg = <0x05310000 0x100>;
> > +                       interrupts = <GIC_SPI 30
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_OHCI2>,
> > +                                <&ccu CLK_BUS_EHCI2>,
> > +                                <&ccu CLK_USB_OHCI2>;
> > +                       resets = <&ccu RST_BUS_OHCI2>,
> > +                                <&ccu RST_BUS_EHCI2>;
> > +                       phys = <&usbphy 2>;
> > +                       phy-names = "usb";
> > +                       status = "disabled";
> > +               };
> > +
> > +               ohci2: usb@5310400 {
> > +                       compatible = "allwinner,sun50i-h616-ohci",
> > +                                    "generic-ohci";
> > +                       reg = <0x05310400 0x100>;
> > +                       interrupts = <GIC_SPI 31
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_OHCI2>,
> > +                                <&ccu CLK_USB_OHCI2>;
> > +                       resets = <&ccu RST_BUS_OHCI2>;
> > +                       phys = <&usbphy 2>;
> > +                       phy-names = "usb";
> > +                       status = "disabled";
> > +               };
> > +
> > +               ehci3: usb@5311000 {
> > +                       compatible = "allwinner,sun50i-h616-ehci",
> > +                                    "generic-ehci";
> > +                       reg = <0x05311000 0x100>;
> > +                       interrupts = <GIC_SPI 32
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_OHCI3>,
> > +                                <&ccu CLK_BUS_EHCI3>,
> > +                                <&ccu CLK_USB_OHCI3>;
> > +                       resets = <&ccu RST_BUS_OHCI3>,
> > +                                <&ccu RST_BUS_EHCI3>;
> > +                       phys = <&usbphy 3>;
> > +                       phy-names = "usb";
> > +                       status = "disabled";
> > +               };
> > +
> > +               ohci3: usb@5311400 {
> > +                       compatible = "allwinner,sun50i-h616-ohci",
> > +                                    "generic-ohci";
> > +                       reg = <0x05311400 0x100>;
> > +                       interrupts = <GIC_SPI 33
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_OHCI3>,
> > +                                <&ccu CLK_USB_OHCI3>;
> > +                       resets = <&ccu RST_BUS_OHCI3>;
> > +                       phys = <&usbphy 3>;
> > +                       phy-names = "usb";
> > +                       status = "disabled";
> > +               };
> > +
> >                 rtc: rtc@7000000 {
> >                         compatible = "allwinner,sun50i-h616-rtc";
> >                         reg = <0x07000000 0x400>;
> 
> 





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux