This patch fixes the error "ravb 11c20000.ethernet eth0: failed to switch
device to config mode" during unbind.
We are doing register access after pm_runtime_put_sync().
We usually do cleanup in reverse order of init. Currently in
remove(), the "pm_runtime_put_sync" is not in reverse order.
Probe
reset_control_deassert(rstc);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
remove
pm_runtime_put_sync(&pdev->dev);
unregister_netdev(ndev);
..
ravb_mdio_release(priv);
pm_runtime_disable(&pdev->dev);
Consider the call to unregister_netdev()
unregister_netdev->unregister_netdevice_queue->rollback_registered_many
that calls the below functions which access the registers after
pm_runtime_put_sync()
1) ravb_get_stats
2) ravb_close
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Leon Romanovsky <leonro@xxxxxxxxxx>
---
v1->v2:
* Added Rb tag from Leon Romanovsky
* Fixed the fixes tag
* Patch header updated from net-next->net as it is fixes patch.
---
drivers/net/ethernet/renesas/ravb_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 33f723a9f471..b4e0fc7f65bd 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2903,12 +2903,12 @@ static int ravb_remove(struct platform_device *pdev)
priv->desc_bat_dma);
/* Set reset mode */
ravb_write(ndev, CCC_OPC_RESET, CCC);
- pm_runtime_put_sync(&pdev->dev);
unregister_netdev(ndev);
if (info->nc_queues)
netif_napi_del(&priv->napi[RAVB_NC]);
netif_napi_del(&priv->napi[RAVB_BE]);
ravb_mdio_release(priv);
+ pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
reset_control_assert(priv->rstc);
free_netdev(ndev);
--
2.25.1
