[PATCH v2] Input: xen-kbdfront - drop keys to shrink modalias

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



xen kbdfront registers itself as being able to deliver *any* key since
it doesn't know what keys the backend may produce.

Unfortunately, the generated modalias gets too large and uevent creation
fails with -ENOMEM.

This can lead to gdm not using the keyboard since there is no seat
associated [1] and the debian installer crashing [2].

Trim the ranges of key capabilities by removing some BTN_* ranges.
While doing this, some neighboring undefined ranges are removed to trim
it further.

An upper limit of KEY_KBD_LCD_MENU5 is still too large.  Use an upper
limit of KEY_BRIGHTNESS_MENU.

This removes:
BTN_DPAD_UP(0x220)..BTN_DPAD_RIGHT(0x223)
Empty space 0x224..0x229

Empty space 0x28a..0x28f
KEY_MACRO1(0x290)..KEY_MACRO30(0x2ad)
KEY_MACRO_RECORD_START          0x2b0
KEY_MACRO_RECORD_STOP           0x2b1
KEY_MACRO_PRESET_CYCLE          0x2b2
KEY_MACRO_PRESET1(0x2b3)..KEY_MACRO_PRESET3(0xb5)
Empty space 0x2b6..0x2b7
KEY_KBD_LCD_MENU1(0x2b8)..KEY_KBD_LCD_MENU5(0x2bc)
Empty space 0x2bd..0x2bf
BTN_TRIGGER_HAPPY(0x2c0)..BTN_TRIGGER_HAPPY40(0x2e7)
Empty space 0x2e8..0x2ff

The modalias shrinks from 2082 to 1550 bytes.

A chunk of keys need to be removed to allow the keyboard to be used.
This may break some functionality, but the hope is these macro keys are
uncommon and don't affect any users.

[1] https://github.com/systemd/systemd/issues/22944
[2] https://lore.kernel.org/xen-devel/87o8dw52jc.fsf@xxxxxxxxxxxxxxxx/T/

Cc: Phillip Susi <phill@xxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Jason Andryuk <jandryuk@xxxxxxxxx>
---
 drivers/input/misc/xen-kbdfront.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

v2:
Remove more keys: v1 didn't remove enough and modalias was still broken.

diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 8d8ebdc2039b..4ecb579df748 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -256,7 +256,14 @@ static int xenkbd_probe(struct xenbus_device *dev,
 		__set_bit(EV_KEY, kbd->evbit);
 		for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
 			__set_bit(i, kbd->keybit);
-		for (i = KEY_OK; i < KEY_MAX; i++)
+		/* In theory we want to go KEY_OK..KEY_MAX, but that grows the
+		 * modalias line too long.  There is a gap of buttons from
+		 * BTN_DPAD_UP..BTN_DPAD_RIGHT and KEY_ALS_TOGGLE is the next
+		 * defined. Then continue up to KEY_BRIGHTNESS_MENU as an upper
+		 * limit. */
+		for (i = KEY_OK; i < BTN_DPAD_UP; i++)
+			__set_bit(i, kbd->keybit);
+		for (i = KEY_ALS_TOGGLE; i <= KEY_BRIGHTNESS_MENU; i++)
 			__set_bit(i, kbd->keybit);
 
 		ret = input_register_device(kbd);
-- 
2.38.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux