Re: [PATCH 12/12] llcc/edac: Fix the base address used for accessing LLCC banks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 07, 2022 at 07:29:21PM +0530, Manivannan Sadhasivam wrote:
> The LLCC driver has been using a fixed register offset stride for accessing
> the CSRs of each LLCC bank. This offset only works for some SoCs like
> SDM845 for which driver support was initially added.
> 
> But the later SoCs use different register stride that vary between the
> banks with holes in-between. So it is not possible to use a single register
> stride for accessing the CSRs of each bank.
> 
> Hence, obtain the base address of each LLCC bank from devicetree and get
> rid of the fixed stride.
> 
> Cc: <stable@xxxxxxxxxxxxxxx> # 4.20
> Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver")
> Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs")
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Please ignore this patch as this is a duplicate that got sneaked in. I will
remove it in next version.

Thanks,
Mani

> ---
>  drivers/edac/qcom_edac.c           | 14 +++----
>  drivers/soc/qcom/llcc-qcom.c       | 64 ++++++++++++++++++------------
>  include/linux/soc/qcom/llcc-qcom.h |  4 +-
>  3 files changed, 44 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c
> index 97a27e42dd61..70bd39a91b89 100644
> --- a/drivers/edac/qcom_edac.c
> +++ b/drivers/edac/qcom_edac.c
> @@ -213,7 +213,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
>  
>  	for (i = 0; i < reg_data.reg_cnt; i++) {
>  		synd_reg = reg_data.synd_reg + (i * 4);
> -		ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
> +		ret = regmap_read(drv->regmap[bank], synd_reg,
>  				  &synd_val);
>  		if (ret)
>  			goto clear;
> @@ -222,8 +222,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
>  			    reg_data.name, i, synd_val);
>  	}
>  
> -	ret = regmap_read(drv->regmap,
> -			  drv->offsets[bank] + reg_data.count_status_reg,
> +	ret = regmap_read(drv->regmap[bank], reg_data.count_status_reg,
>  			  &err_cnt);
>  	if (ret)
>  		goto clear;
> @@ -233,8 +232,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
>  	edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n",
>  		    reg_data.name, err_cnt);
>  
> -	ret = regmap_read(drv->regmap,
> -			  drv->offsets[bank] + reg_data.ways_status_reg,
> +	ret = regmap_read(drv->regmap[bank], reg_data.ways_status_reg,
>  			  &err_ways);
>  	if (ret)
>  		goto clear;
> @@ -296,8 +294,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl)
>  
>  	/* Iterate over the banks and look for Tag RAM or Data RAM errors */
>  	for (i = 0; i < drv->num_banks; i++) {
> -		ret = regmap_read(drv->regmap,
> -				  drv->offsets[i] + DRP_INTERRUPT_STATUS,
> +		ret = regmap_read(drv->regmap[i], DRP_INTERRUPT_STATUS,
>  				  &drp_error);
>  
>  		if (!ret && (drp_error & SB_ECC_ERROR)) {
> @@ -312,8 +309,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl)
>  		if (!ret)
>  			irq_rc = IRQ_HANDLED;
>  
> -		ret = regmap_read(drv->regmap,
> -				  drv->offsets[i] + TRP_INTERRUPT_0_STATUS,
> +		ret = regmap_read(drv->regmap[i], TRP_INTERRUPT_0_STATUS,
>  				  &trp_error);
>  
>  		if (!ret && (trp_error & SB_ECC_ERROR)) {
> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> index 23ce2f78c4ed..7264ac9993e0 100644
> --- a/drivers/soc/qcom/llcc-qcom.c
> +++ b/drivers/soc/qcom/llcc-qcom.c
> @@ -62,8 +62,6 @@
>  #define LLCC_TRP_WRSC_CACHEABLE_EN    0x21f2c
>  #define LLCC_TRP_ALGO_CFG8	      0x21f30
>  
> -#define BANK_OFFSET_STRIDE	      0x80000
> -
>  #define LLCC_VERSION_2_0_0_0          0x02000000
>  #define LLCC_VERSION_2_1_0_0          0x02010000
>  #define LLCC_VERSION_4_1_0_0          0x04010000
> @@ -927,6 +925,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
>  	const struct llcc_slice_config *llcc_cfg;
>  	u32 sz;
>  	u32 version;
> +	struct regmap *regmap;
>  
>  	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
>  	if (!drv_data) {
> @@ -934,12 +933,46 @@ static int qcom_llcc_probe(struct platform_device *pdev)
>  		goto err;
>  	}
>  
> -	drv_data->regmap = qcom_llcc_init_mmio(pdev, "llcc_base");
> -	if (IS_ERR(drv_data->regmap)) {
> -		ret = PTR_ERR(drv_data->regmap);
> +	/* Initialize the first LLCC bank regmap */
> +	regmap = qcom_llcc_init_mmio(pdev, "llcc0_base");
> +	if (IS_ERR(regmap)) {
> +		ret = PTR_ERR(regmap);
> +		goto err;
> +	}
> +
> +	cfg = of_device_get_match_data(&pdev->dev);
> +
> +	ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0],
> +			  &num_banks);
> +	if (ret)
> +		goto err;
> +
> +	num_banks &= LLCC_LB_CNT_MASK;
> +	num_banks >>= LLCC_LB_CNT_SHIFT;
> +	drv_data->num_banks = num_banks;
> +
> +	drv_data->regmap = devm_kcalloc(dev, num_banks, sizeof(*drv_data->regmap), GFP_KERNEL);
> +	if (!drv_data->regmap) {
> +		ret = -ENOMEM;
>  		goto err;
>  	}
>  
> +	drv_data->regmap[0] = regmap;
> +
> +	/* Initialize rest of LLCC bank regmaps */
> +	for (i = 1; i < num_banks; i++) {
> +		char *base = kasprintf(GFP_KERNEL, "llcc%d_base", i);
> +
> +		drv_data->regmap[i] = qcom_llcc_init_mmio(pdev, base);
> +		if (IS_ERR(drv_data->regmap[i])) {
> +			ret = PTR_ERR(drv_data->regmap[i]);
> +			kfree(base);
> +			goto err;
> +		}
> +
> +		kfree(base);
> +	}
> +
>  	drv_data->bcast_regmap =
>  		qcom_llcc_init_mmio(pdev, "llcc_broadcast_base");
>  	if (IS_ERR(drv_data->bcast_regmap)) {
> @@ -947,8 +980,6 @@ static int qcom_llcc_probe(struct platform_device *pdev)
>  		goto err;
>  	}
>  
> -	cfg = of_device_get_match_data(&pdev->dev);
> -
>  	/* Extract version of the IP */
>  	ret = regmap_read(drv_data->bcast_regmap, cfg->reg_offset[LLCC_COMMON_HW_INFO],
>  			  &version);
> @@ -957,15 +988,6 @@ static int qcom_llcc_probe(struct platform_device *pdev)
>  
>  	drv_data->version = version;
>  
> -	ret = regmap_read(drv_data->regmap, cfg->reg_offset[LLCC_COMMON_STATUS0],
> -			  &num_banks);
> -	if (ret)
> -		goto err;
> -
> -	num_banks &= LLCC_LB_CNT_MASK;
> -	num_banks >>= LLCC_LB_CNT_SHIFT;
> -	drv_data->num_banks = num_banks;
> -
>  	llcc_cfg = cfg->sct_data;
>  	sz = cfg->size;
>  
> @@ -973,16 +995,6 @@ static int qcom_llcc_probe(struct platform_device *pdev)
>  		if (llcc_cfg[i].slice_id > drv_data->max_slices)
>  			drv_data->max_slices = llcc_cfg[i].slice_id;
>  
> -	drv_data->offsets = devm_kcalloc(dev, num_banks, sizeof(u32),
> -							GFP_KERNEL);
> -	if (!drv_data->offsets) {
> -		ret = -ENOMEM;
> -		goto err;
> -	}
> -
> -	for (i = 0; i < num_banks; i++)
> -		drv_data->offsets[i] = i * BANK_OFFSET_STRIDE;
> -
>  	drv_data->bitmap = devm_bitmap_zalloc(dev, drv_data->max_slices,
>  					      GFP_KERNEL);
>  	if (!drv_data->bitmap) {
> diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
> index ad1fd718169d..4b8bf585f9ba 100644
> --- a/include/linux/soc/qcom/llcc-qcom.h
> +++ b/include/linux/soc/qcom/llcc-qcom.h
> @@ -129,12 +129,11 @@ struct llcc_edac_reg_offset {
>   * @max_slices: max slices as read from device tree
>   * @num_banks: Number of llcc banks
>   * @bitmap: Bit map to track the active slice ids
> - * @offsets: Pointer to the bank offsets array
>   * @ecc_irq: interrupt for llcc cache error detection and reporting
>   * @version: Indicates the LLCC version
>   */
>  struct llcc_drv_data {
> -	struct regmap *regmap;
> +	struct regmap **regmap;
>  	struct regmap *bcast_regmap;
>  	const struct llcc_slice_config *cfg;
>  	const struct llcc_edac_reg_offset *edac_reg_offset;
> @@ -143,7 +142,6 @@ struct llcc_drv_data {
>  	u32 max_slices;
>  	u32 num_banks;
>  	unsigned long *bitmap;
> -	u32 *offsets;
>  	int ecc_irq;
>  	u32 version;
>  };
> -- 
> 2.25.1
> 

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux