From: Frank Jungclaus <frank.jungclaus@xxxxxx>
We don't get any further EVENT from an esd CAN USB device for changes
on REC or TEC while those counters converge to 0 (with ecc == 0). So
when handling the "Back to Error Active"-event force txerr = rxerr =
0, otherwise the berr-counters might stay on values like 95 forever.
Also, to make life easier during the ongoing development a
netdev_dbg() has been introduced to allow dumping error events send by
an esd CAN USB device.
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@xxxxxx>
Link: https://lore.kernel.org/all/20221130202242.3998219-2-frank.jungclaus@xxxxxx
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
drivers/net/can/usb/esd_usb.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 81b88e9e5bdc..42323f5e6f3a 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -234,6 +234,10 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
u8 rxerr = msg->msg.rx.data[2];
u8 txerr = msg->msg.rx.data[3];
+ netdev_dbg(priv->netdev,
+ "CAN_ERR_EV_EXT: dlc=%#02x state=%02x ecc=%02x rec=%02x tec=%02x\n",
+ msg->msg.rx.dlc, state, ecc, rxerr, txerr);
+
skb = alloc_can_err_skb(priv->netdev, &cf);
if (skb == NULL) {
stats->rx_dropped++;
@@ -260,6 +264,8 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
break;
default:
priv->can.state = CAN_STATE_ERROR_ACTIVE;
+ txerr = 0;
+ rxerr = 0;
break;
}
} else {
--
2.35.1
