From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
commit c981cdfb9925f64a364f13c2b4f98f877308a408 upstream.
Commit 20b92a30b561 ("mmc: sdhci: update signal voltage switch code")
removed voltage switch delays from sdhci because mmc core had been
enhanced to support them. However that assumed that sdhci_set_ios()
did a single clock change, which it did not, and so the delays in mmc
core, which should have come after the first clock change, were not
effective.
Fix by avoiding re-configuring UHS and preset settings when the clock
is turning on and the settings have not changed. That then also avoids
the associated clock changes, so that then sdhci_set_ios() does a single
clock change when voltage switching, and the mmc core delays become
effective.
To do that has meant keeping track of driver strength (host->drv_type),
and cases of reinitialization (host->reinit_uhs).
Note also, the 'turning_on_clk' restriction should not be necessary
but is done to minimize the impact of the change on stable kernels.
Fixes: 20b92a30b561 ("mmc: sdhci: update signal voltage switch code")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Link: https://lore.kernel.org/r/20221128133259.38305-2-adrian.hunter@xxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 61 +++++++++++++++++++++++++++++++++++++++++------
drivers/mmc/host/sdhci.h | 2 +
2 files changed, 56 insertions(+), 7 deletions(-)
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -339,6 +339,7 @@ static void sdhci_init(struct sdhci_host
if (soft) {
/* force clock reconfiguration */
host->clock = 0;
+ host->reinit_uhs = true;
mmc->ops->set_ios(mmc, &mmc->ios);
}
}
@@ -2258,11 +2259,46 @@ void sdhci_set_uhs_signaling(struct sdhc
}
EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
+static bool sdhci_timing_has_preset(unsigned char timing)
+{
+ switch (timing) {
+ case MMC_TIMING_UHS_SDR12:
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_SDR50:
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ return true;
+ };
+ return false;
+}
+
+static bool sdhci_preset_needed(struct sdhci_host *host, unsigned char timing)
+{
+ return !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
+ sdhci_timing_has_preset(timing);
+}
+
+static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_ios *ios)
+{
+ /*
+ * Preset Values are: Driver Strength, Clock Generator and SDCLK/RCLK
+ * Frequency. Check if preset values need to be enabled, or the Driver
+ * Strength needs updating. Note, clock changes are handled separately.
+ */
+ return !host->preset_enabled &&
+ (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type);
+}
+
void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
+ bool reinit_uhs = host->reinit_uhs;
+ bool turning_on_clk = false;
u8 ctrl;
+ host->reinit_uhs = false;
+
if (ios->power_mode == MMC_POWER_UNDEFINED)
return;
@@ -2288,6 +2324,8 @@ void sdhci_set_ios(struct mmc_host *mmc,
sdhci_enable_preset_value(host, false);
if (!ios->clock || ios->clock != host->clock) {
+ turning_on_clk = ios->clock && !host->clock;
+
host->ops->set_clock(host, ios->clock);
host->clock = ios->clock;
@@ -2314,6 +2352,17 @@ void sdhci_set_ios(struct mmc_host *mmc,
host->ops->set_bus_width(host, ios->bus_width);
+ /*
+ * Special case to avoid multiple clock changes during voltage
+ * switching.
+ */
+ if (!reinit_uhs &&
+ turning_on_clk &&
+ host->timing == ios->timing &&
+ host->version >= SDHCI_SPEC_300 &&
+ !sdhci_presetable_values_change(host, ios))
+ return;
+
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if (!(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)) {
@@ -2357,6 +2406,7 @@ void sdhci_set_ios(struct mmc_host *mmc,
}
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+ host->drv_type = ios->drv_type;
} else {
/*
* According to SDHC Spec v3.00, if the Preset Value
@@ -2384,19 +2434,14 @@ void sdhci_set_ios(struct mmc_host *mmc,
host->ops->set_uhs_signaling(host, ios->timing);
host->timing = ios->timing;
- if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
- ((ios->timing == MMC_TIMING_UHS_SDR12) ||
- (ios->timing == MMC_TIMING_UHS_SDR25) ||
- (ios->timing == MMC_TIMING_UHS_SDR50) ||
- (ios->timing == MMC_TIMING_UHS_SDR104) ||
- (ios->timing == MMC_TIMING_UHS_DDR50) ||
- (ios->timing == MMC_TIMING_MMC_DDR52))) {
+ if (sdhci_preset_needed(host, ios->timing)) {
u16 preset;
sdhci_enable_preset_value(host, true);
preset = sdhci_get_preset_value(host);
ios->drv_type = FIELD_GET(SDHCI_PRESET_DRV_MASK,
preset);
+ host->drv_type = ios->drv_type;
}
/* Re-enable SD Clock */
@@ -3707,6 +3752,7 @@ int sdhci_resume_host(struct sdhci_host
sdhci_init(host, 0);
host->pwr = 0;
host->clock = 0;
+ host->reinit_uhs = true;
mmc->ops->set_ios(mmc, &mmc->ios);
} else {
sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER));
@@ -3769,6 +3815,7 @@ int sdhci_runtime_resume_host(struct sdh
/* Force clock and power re-program */
host->pwr = 0;
host->clock = 0;
+ host->reinit_uhs = true;
mmc->ops->start_signal_voltage_switch(mmc, &mmc->ios);
mmc->ops->set_ios(mmc, &mmc->ios);
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -520,6 +520,8 @@ struct sdhci_host {
unsigned int clock; /* Current clock (MHz) */
u8 pwr; /* Current voltage */
+ u8 drv_type; /* Current UHS-I driver type */
+ bool reinit_uhs; /* Force UHS-related re-initialization */
bool runtime_suspended; /* Host is runtime suspended */
bool bus_on; /* Bus power prevents runtime suspend */
