From: Sebastian Falbesoner <sebastian.falbesoner@xxxxxxxxx>
commit a3cab1d2132474969871b5d7f915c5c0167b48b0 upstream.
With the current logic the "failed to exit halt state" error would be
shown even if any other bit than CQHCI_HALT was set in the CQHCI_CTL
register, since the right hand side is always true. Fix this by using
the correct operator (bit-wise instead of logical AND) to only check for
the halt bit flag, which was obviously intended here.
Fixes: 85236d2be844 ("mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE")
Signed-off-by: Sebastian Falbesoner <sebastian.falbesoner@xxxxxxxxx>
Acked-by: Haibo Chen <haibo.chen@xxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20221121105721.1903878-1-sebastian.falbesoner@xxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1512,7 +1512,7 @@ static void esdhc_cqe_enable(struct mmc_
* system resume back.
*/
cqhci_writel(cq_host, 0, CQHCI_CTL);
- if (cqhci_readl(cq_host, CQHCI_CTL) && CQHCI_HALT)
+ if (cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT)
dev_err(mmc_dev(host->mmc),
"failed to exit halt state when enable CQE\n");
