Re: [PATCH 6.0 000/289] 6.0.11-rc1 review

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 1 Dec 2022 at 00:13, Greg Kroah-Hartman
<gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> This is the start of the stable review cycle for the 6.0.11 release.
> There are 289 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 02 Dec 2022 18:05:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.0.11-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.0.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro's test farm.

On the arm32bit TI Beagleboard X15 the intermittent Internal error: noticed on
stable-rc 6.0.11-rc1 attached boot log. I have re-tested multiple on stable-rc
6.0.11-rc1 but not reproduced.

Old report that was reported on Linux next-20220526 tag.
    Internal error: Oops: 5 [#1] SMP ARM: PC is at l3_interrupt_handler
    https://lore.kernel.org/all/CA+G9fYtNLnFs-RWeSkLDq9imwout7px4O13OqAgGxK1O6fGEBA@xxxxxxxxxxxxxx/

The stable-rc 6.0.11-rc1 x15 crash log details,
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.0.y/build/v6.0.9-604-g57e2fc7c0112/testrun/13332986/suite/log-parser-test/tests/

--
Linaro LKFT
https://lkft.linaro.org
Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.0.11-rc1 (tuxmake@tuxmake) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP @1669834074
[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: TI AM5728 BeagleBoard-X15
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x95800000, size 56 MiB
[    0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x9d000000, size 32 MiB
[    0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x9f000000, size 8 MiB
[    0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 64 MiB at 0xfb800000
[    0.000000] OMAP4: Map 0xafe00000 to (ptrval) for dram barrier
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000afdfffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  [mem 0x00000000afe00000-0x00000000ffffefff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000afdfffff]
[    0.000000]   node   0: [mem 0x00000000b0000000-0x00000000ffffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffefff]
[    0.000000] On node 0, zone HighMem: 512 pages in unavailable ranges
[    0.000000] DRA752 ES2.0
[    0.000000] percpu: Embedded 16 pages/cpu s35156 r8192 d22188 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522051
[    0.000000] Kernel command line: console=ttyS2,115200n8 root=PARTUUID=21674ce0-3b3d-d74e-a1fb-cb0f72855b64 rw rootfstype=ext4 rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1812560K/2095100K available (17408K kernel code, 2688K rwdata, 8948K rodata, 2048K init, 505K bss, 53164K reserved, 229376K cma-reserved, 1245180K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] ftrace: allocating 60953 entries in 179 pages
[    0.000000] ftrace: allocated 179 pages with 5 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000000] sched_clock: 32 bits at 33kHz, resolution 30517ns, wraps every 65535999984741ns
[    0.002593] TI gptimer clockevent: always-on 32786 Hz at /ocp/interconnect@4ae00000/segment@10000/target-module@8000
[    0.007171] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48800000/segment@0/target-module@2c000
[    0.007385] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48800000/segment@0/target-module@2e000
[    0.010711] Console: colour dummy device 80x30
[    0.010742] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664)
[    0.063232] pid_max: default: 32768 minimum: 301
[    0.063385] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.063415] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.063995] CPU: Testing write buffer coherency: ok
[    0.064025] CPU0: Spectre v2: using ICIALLU workaround
[    0.064056] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.064270] /cpus/cpu@0 missing clock-frequency property
[    0.064300] /cpus/cpu@1 missing clock-frequency property
[    0.064331] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.065093] cblist_init_generic: Setting adjustable number of callback queues.
[    0.065093] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.065185] Setting up static identity map for 0x80300000 - 0x803000ac
[    0.068511] rcu: Hierarchical SRCU implementation.
[    0.068511] rcu: 	Max phase no-delay instances is 1000.
[    0.077545] EFI services will not be available.
[    0.078155] smp: Bringing up secondary CPUs ...
[    0.138305] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.138336] CPU1: Spectre v2: using ICIALLU workaround
[    0.138458] smp: Brought up 1 node, 2 CPUs
[    0.138458] SMP: Total of 2 processors activated (3994.41 BogoMIPS).
[    0.138488] CPU: All CPU(s) started in HYP mode.
[    0.138488] CPU: Virtualization extensions available.
[    0.138946] devtmpfs: initialized
[    0.160430] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.160583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.160614] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.164062] pinctrl core: initialized pinctrl subsystem
[    0.169921] DMI not present or invalid.
[    0.170410] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.172851] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.176788] thermal_sys: Registered thermal governor 'step_wise'
[    0.177856] cpuidle: using governor menu
[    0.219360] platform encoder: Fixing up cyclic dependency with connector
[    0.219940] No ATAGs?
[    0.220031] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.220031] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.227783] Serial: AMBA PL011 UART driver
[    0.240203] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.249786] cryptd: max_cpu_qlen set to 1000
[    0.256072] iommu: Default domain type: Translated 
[    0.256072] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.256622] SCSI subsystem initialized
[    0.257019] usbcore: registered new interface driver usbfs
[    0.257049] usbcore: registered new interface driver hub
[    0.257080] usbcore: registered new device driver usb
[    0.258148] mc: Linux media interface: v0.10
[    0.258178] videodev: Linux video capture interface: v2.00
[    0.258239] pps_core: LinuxPPS API ver. 1 registered
[    0.258270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[    0.258270] PTP clock support registered
[    0.258422] EDAC MC: Ver: 3.0.0
[    1.034301] vgaarb: loaded
[    1.034576] clocksource: Switched to clocksource 32k_counter
[    1.091918] NET: Registered PF_INET protocol family
[    1.092132] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.093261] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.093292] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.093322] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.093383] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.093505] TCP: Hash tables configured (established 8192 bind 8192)
[    1.093627] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    1.093658] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.093688] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.093841] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.094360] RPC: Registered named UNIX socket transport module.
[    1.094360] RPC: Registered udp transport module.
[    1.094360] RPC: Registered tcp transport module.
[    1.094390] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.094390] PCI: CLS 0 bytes, default 64
[    1.094879] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing.
[    1.095092] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    1.096038] Initialise system trusted keyrings
[    1.096252] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.102630] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.103332] NFS: Registering the id_resolver key type
[    1.103363] Key type id_resolver registered
[    1.103393] Key type id_legacy registered
[    1.103454] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.103454] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.103485] ntfs: driver 2.1.32 [Flags: R/O].
[    1.104888] jitterentropy: Initialization failed with host not compliant with requirements: 2
[    1.104888] NET: Registered PF_ALG protocol family
[    1.104919] Key type asymmetric registered
[    1.104919] Asymmetric key parser 'x509' registered
[    1.105072] bounce: pool size: 64 pages
[    1.105163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.105163] io scheduler mq-deadline registered
[    1.105163] io scheduler kyber registered
[    1.188262] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[    1.191528] SuperH (H)SCI(F) driver initialized
[    1.192230] msm_serial: driver initialized
[    1.192230] STMicroelectronics ASC driver initialized
[    1.193847] STM32 USART driver initialized
[    1.206268] brd: module loaded
[    1.210998] loop: module loaded
[    1.221221] CAN device driver interface
[    1.222045] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[    1.222839] e1000e: Intel(R) PRO/1000 Network Driver
[    1.222839] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.222869] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.222900] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.223358] QLogic FastLinQ 4xxxx Core Module qed
[    1.223358] qede init: QLogic FastLinQ 4xxxx Ethernet Driver qede
[    1.226135] pegasus: Pegasus/Pegasus II USB Ethernet driver
[    1.226165] usbcore: registered new interface driver pegasus
[    1.226196] usbcore: registered new interface driver asix
[    1.226226] usbcore: registered new interface driver ax88179_178a
[    1.226257] usbcore: registered new interface driver cdc_ether
[    1.226287] usbcore: registered new interface driver smsc75xx
[    1.226348] usbcore: registered new interface driver smsc95xx
[    1.226379] usbcore: registered new interface driver net1080
[    1.226409] usbcore: registered new interface driver cdc_subset
[    1.226440] usbcore: registered new interface driver zaurus
[    1.226501] usbcore: registered new interface driver cdc_ncm
[    1.228302] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.228302] ehci-pci: EHCI PCI platform driver
[    1.228332] ehci-platform: EHCI generic platform driver
[    1.228485] ehci-omap: OMAP-EHCI Host Controller driver
[    1.228576] ehci-orion: EHCI orion driver
[    1.228698] SPEAr-ehci: EHCI SPEAr driver
[    1.228820] ehci-st: EHCI STMicroelectronics driver
[    1.228912] ehci-atmel: EHCI Atmel driver
[    1.229034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.229034] ohci-pci: OHCI PCI platform driver
[    1.229064] ohci-platform: OHCI generic platform driver
[    1.229187] SPEAr-ohci: OHCI SPEAr driver
[    1.229309] ohci-st: OHCI STMicroelectronics driver
[    1.229400] ohci-atmel: OHCI Atmel driver
[    1.229797] usbcore: registered new interface driver usb-storage
[    1.233703] i2c_dev: i2c /dev entries driver
[    1.245147] cpu cpu0: Failed to set OPP config
[    1.246704] sdhci: Secure Digital Host Controller Interface driver
[    1.246734] sdhci: Copyright(c) Pierre Ossman
[    1.248138] Synopsys Designware Multimedia Card Interface Driver
[    1.249420] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.251770] ledtrig-cpu: registered to indicate activity on CPUs
[    1.255645] usbcore: registered new interface driver usbhid
[    1.255645] usbhid: USB HID core driver
[    1.258544]  cs_system_cfg: CoreSight Configuration manager initialised
[    1.262573] NET: Registered PF_INET6 protocol family
[    1.263549] Segment Routing with IPv6
[    1.263580] In-situ OAM (IOAM) with IPv6
[    1.263641] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.264129] NET: Registered PF_PACKET protocol family
[    1.264129] can: controller area network core
[    1.264190] NET: Registered PF_CAN protocol family
[    1.264190] can: raw protocol
[    1.264221] can: broadcast manager protocol
[    1.264221] can: netlink gateway - max_hops=1
[    1.264495] Key type dns_resolver registered
[    1.264556] ThumbEE CPU extension supported.
[    1.264617] Registering SWP/SWPB emulation handler
[    1.264984] omap_voltage_late_init: Voltage driver support not added
[    1.265014] Power Management for TI OMAP4+ devices.
[    1.265869] registered taskstats version 1
[    1.265869] Loading compiled-in X.509 certificates
[    1.331085] pinctrl-single 4a003400.pinmux: 282 pins, size 1128
[    1.391998] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
[    1.411712] ahci 4a140000.sata: supply ahci not found, using dummy regulator
[    1.411804] ahci 4a140000.sata: supply phy not found, using dummy regulator
[    1.411926] ahci 4a140000.sata: supply target not found, using dummy regulator
[    1.412292] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1
[    1.412322] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    1.412322] ahci 4a140000.sata: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst 
[    1.413635] scsi host0: ahci
[    1.413879] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 98
[    1.428741] gpio gpiochip0: (gpio-0-31): not an immutable chip, please consider fixing it!
[    1.429138] OMAP GPIO hardware version 0.1
[    1.434173] ti-sysc: probe of 4ae18000.target-module failed with error -16
[    1.449310] printk: console [ttyS2] disabled
[    1.449401] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 101, base_baud = 3000000) is a 8250
[    1.746398] ata1: SATA link down (SStatus 0 SControl 300)
[    2.787048] printk: console [ttyS2] enabled
[    2.806579] gpio gpiochip1: (gpio-32-63): not an immutable chip, please consider fixing it!
[    2.817199] gpio gpiochip2: (gpio-64-95): not an immutable chip, please consider fixing it!
[    2.827697] gpio gpiochip3: (gpio-96-127): not an immutable chip, please consider fixing it!
[    2.838256] gpio gpiochip4: (gpio-128-159): not an immutable chip, please consider fixing it!
[    2.848907] gpio gpiochip5: (gpio-160-191): not an immutable chip, please consider fixing it!
[    2.859527] gpio gpiochip6: (gpio-192-223): not an immutable chip, please consider fixing it!
[    2.870239] gpio gpiochip7: (gpio-224-255): not an immutable chip, please consider fixing it!
[    2.882171] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz
[    2.897308] palmas 0-0058: Irq flag is 0x00000008
[    2.928894] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0
[    2.977050] at24 0-0050: supply vcc not found, using dummy regulator
[    2.983856] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
[    2.990753] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[    3.010711] omap_rng 48090000.rng: Random Number Generator ver. 20
[    3.010955] random: crng init done
[    3.025238] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22)
[    3.034057] sdhci-omap 4809c000.mmc: Got CD GPIO
[    3.039031] sdhci-omap 4809c000.mmc: supply vqmmc not found, using dummy regulator
[    3.070953] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode
[    3.104827] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA
[    3.124603] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000
[    3.135528] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY
[    3.145263] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY
[    3.155578] cpsw-switch 48484000.switch: initialized cpsw ale version 1.4
[    3.162414] cpsw-switch 48484000.switch: ALE Table size 1024
[    3.168182] cpsw-switch 48484000.switch: cpts: overflow check period 500 (jiffies)
[    3.175842] cpsw-switch 48484000.switch: CPTS: ref_clk_freq:266000000 calc_mult:4036623398 calc_shift:30 error:-1 nsec/sec
[    3.187011] cpsw-switch 48484000.switch: Detected MACID = f8:30:02:cf:6e:e6
[    3.194030] cpsw-switch 48484000.switch: Detected MACID = f8:30:02:cf:6e:e7
[    3.202789] cpsw-switch 48484000.switch: initialized (regs 0x48484000, pool size 256) hw_ver:0019010F 1.15 (0)
[    3.237701] ti-sysc: probe of 4882c000.target-module failed with error -16
[    3.247070] ti-sysc: probe of 4882e000.target-module failed with error -16
[    3.290252] dra7-pcie 51000000.pcie: host bridge /ocp/target-module@51000000/pcie@51000000 ranges:
[    3.299346] dra7-pcie 51000000.pcie:       IO 0x0020003000..0x0020012fff -> 0x0000000000
[    3.307556] dra7-pcie 51000000.pcie:      MEM 0x0020013000..0x002fffffff -> 0x0020013000
[    3.315795] dra7-pcie 51000000.pcie: iATU unroll: disabled
[    3.321319] dra7-pcie 51000000.pcie: iATU regions: 16 ob, 4 ib, align 4K, limit 4G
[    4.329772] dra7-pcie 51000000.pcie: Phy link never came up
[    4.335540] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00
[    4.341857] pci_bus 0000:00: root bus resource [bus 00-ff]
[    4.347412] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    4.353607] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff]
[    4.360565] pci 0000:00:00.0: [104c:8888] type 01 class 0x060400
[    4.366638] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    4.372955] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    4.379364] pci 0000:00:00.0: supports D1
[    4.383392] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    4.396392] PCI: bus0: Fast back to back transfers disabled
[    4.402313] PCI: bus1: Fast back to back transfers enabled
[    4.407867] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff]
[    4.414703] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff]
[    4.421539] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    4.427215] pcieport 0000:00:00.0: PME: Signaling with IRQ 135
[    4.442047] edma 43300000.dma: memcpy is disabled
[    4.449768] edma 43300000.dma: TI EDMA DMA engine driver
[    4.484130] ti_abb 4ae07e30.regulator-abb-dspeve: can't request region for resource [mem 0x4ae06010-0x4ae06013]
[    4.494293] ti_abb: probe of 4ae07e30.regulator-abb-dspeve failed with error -16
[    4.503906] ti_abb 4ae07de4.regulator-abb-gpu: can't request region for resource [mem 0x4ae06010-0x4ae06013]
[    4.513824] ti_abb: probe of 4ae07de4.regulator-abb-gpu failed with error -16
[    4.547515] ti_opp_supply: probe of 4a003b20.opp-supply failed with error 1
[    4.606109] rtc-ds1307 2-006f: registered as rtc0
[    4.611145] rtc-ds1307 2-006f: hctosys: unable to read the hardware clock
[    4.622070] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: registered as rtc1
[    4.635375] sdhci-omap 480b4000.mmc: supply pbias not found, using dummy regulator
[    4.644439] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.649993] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    4.658325] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    4.667816] xhci-hcd xhci-hcd.1.auto: irq 142, io mem 0x48890000
[    4.673980] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.679504] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    4.683502] mmc1: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA
[    4.687225] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    4.701568] hub 1-0:1.0: USB hub found
[    4.705383] hub 1-0:1.0: 1 port detected
[    4.709716] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.718475] hub 2-0:1.0: USB hub found
[    4.722381] hub 2-0:1.0: 1 port detected
[    4.732055] Waiting for root device PARTUUID=21674ce0-3b3d-d74e-a1fb-cb0f72855b64...
[    4.771789] mmc1: new DDR MMC card at address 0001
[    4.777160] mmcblk1: mmc1:0001 M62704 3.53 GiB 
[    4.786254]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[    4.794189] mmcblk1boot0: mmc1:0001 M62704 2.00 MiB 
[    4.800140] mmcblk1boot1: mmc1:0001 M62704 2.00 MiB 
[    4.806060] mmcblk1rpmb: mmc1:0001 M62704 512 KiB, chardev (235:0)
[    5.034576] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    5.080200] EXT4-fs (mmcblk1p12): mounted filesystem with ordered data mode. Quota mode: disabled.
[    5.093444] VFS: Mounted root (ext4 filesystem) on device 179:12.
[    5.100830] devtmpfs: mounted
[    5.114898] Freeing unused kernel image (initmem) memory: 2048K
[    5.121093] Run /sbin/init as init process
[    5.241271] systemd[1]: System time before build time, advancing clock.
[    5.260406] systemd[1]: systemd 250.5+ running in system mode (-PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[    5.277526] hub 1-1:1.0: USB hub found
[    5.292297] systemd[1]: Detected architecture arm.
[    5.295684] hub 1-1:1.0: 4 ports detected
[    5.374694] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd

Welcome to Linux-Kernel-Functional-Testing nodistro.0!

[    5.415313] systemd[1]: Hostname set to <am57xx-evm>.
[    5.424713] systemd[1]: Initializing machine ID from random generator.
[    5.453491] hub 2-1:1.0: USB hub found
[    5.457489] hub 2-1:1.0: 4 ports detected
[    5.744598] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.754943] ata1.00: ATA-9: SanDisk SSD PLUS 120GB, UE5000RL, max UDMA/133
[    5.761871] ata1.00: 234455040 sectors, multi 1: LBA48 NCQ (depth 32)
[    5.769134] ata1.00: Features: Dev-Sleep
[    5.778015] ata1.00: configured for UDMA/133
[    5.782501] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[    5.791534] sd 0:0:0:0: [sda] 234455040 512-byte logical blocks: (120 GB/112 GiB)
[    5.804595] sd 0:0:0:0: [sda] Write Protect is off
[    5.809478] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.818695] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    5.826110] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.182128] systemd[1]: Queued start job for default target Multi-User System.
[    6.263397] systemd[1]: Created slice Slice /system/getty.
[  OK  ] Created slice Slice /system/getty.
[    6.306396] systemd[1]: Created slice Slice /system/modprobe.
[  OK  ] Created slice Slice /system/modprobe.
[    6.346130] systemd[1]: Created slice Slice /system/serial-getty.
[  OK  ] Created slice Slice /system/serial-getty.
[    6.385833] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    6.425415] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[    6.464904] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[    6.505645] systemd[1]: Reached target Path Units.
[  OK  ] Reached target Path Units.
[    6.544769] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    6.585113] systemd[1]: Reached target Slice Units.
[  OK  ] Reached target Slice Units.
[    6.624786] systemd[1]: Reached target Swaps.
[  OK  ] Reached target Swaps.
[    6.656433] systemd[1]: Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[    6.694763] systemd[1]: Reached target RPC Port Mapper.
[  OK  ] Reached target RPC Port Mapper.
[    6.736267] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    6.774932] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[    6.836822] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[    6.848266] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    6.885162] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    6.926025] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    6.965209] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    7.005126] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    7.045745] systemd[1]: Listening on User Database Manager Socket.
[  OK  ] Listening on User Database Manager Socket.
[    7.085815] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[    7.145019] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    7.188415] systemd[1]: Mounting Kernel Debug File System...
         Mounting Kernel Debug File System...
[    7.228271] systemd[1]: Mounting Kernel Trace File System...
         Mounting Kernel Trace File System...
[    7.315032] systemd[1]: Mounting Temporary Directory /tmp...
         Mounting Temporary Directory /tmp...
[    7.348327] systemd[1]: Starting Create List of Static Device Nodes...
         Starting Create List of Static Device Nodes...
[    7.389221] systemd[1]: Starting Load Kernel Module configfs...
         Starting Load Kernel Module configfs...
[    7.439117] systemd[1]: Starting Load Kernel Module drm...
         Starting Load Kernel Module drm...
[    7.525238] systemd[1]: Starting Load Kernel Module fuse...
         Starting Load Kernel Module fuse...
[    7.557830] systemd[1]: Starting Start psplash boot splash screen...
         Starting Start psplash boot splash screen...
[    7.598632] systemd[1]: Starting RPC Bind...
         Starting RPC Bind...
[    7.634887] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[    7.648071] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[    7.661041] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[    7.705169] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    7.739410] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[    7.777160] systemd[1]: Starting Generate network units from Kernel command line...
         Starting Generate network …ts from Kernel command line...
[    7.856719] systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems[    7.879089] EXT4-fs (mmcblk1p12): re-mounted. Quota mode: disabled.
...
[    7.918670] systemd[1]: Starting Coldplug All udev Devices...
         Starting Coldplug All udev Devices...
[    7.970916] systemd[1]: Started RPC Bind.
[  OK  ] Started RPC Bind.
[    8.015502] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted Kernel Trace File System.
[  OK  ] Mounted Temporary Directory /tmp.
[  OK  ] Finished Create List of Static Device Nodes.
[  OK  ] Finished Load Kernel Module configfs.
[  OK  ] Finished Load Kernel Module drm.
[  OK  ] Finished Load Kernel Module fuse.
[FAILED] Failed to start Start psplash boot splash screen.
See 'systemctl status psplash-start.service' for details.
[DEPEND] Dependency failed for Star…progress communication helper.
[  OK  ] Finished Load Kernel Modules.
[  OK  ] Finished Generate network units from Kernel command line.
[  OK  ] Finished Remount Root and Kernel File Systems.
         Mounting Kernel Configuration File System...
         Starting Flush Journal to Persistent Storage...
[    8.640930] systemd-journald[235]: Received client request to flush runtime journal.
         Starting Apply Kernel Variables...
         Starting Create System Users...
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Finished Flush Journal to Persistent Storage.
[  OK  ] Finished Apply Kernel Variables.
[  OK  ] Finished Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Finished Create Static Device Nodes in /dev.
[  OK  ] Reached target Preparation for Local File Systems.
         Mounting /var/volatile...
         Starting Rule-based Manage…for Device Events and Files...
[  OK  ] Mounted /var/volatile.
         Starting Load/Save Random Seed...
[  OK  ] Reached target Local File Systems.
         Starting Rebuild Dynamic Linker Cache...
         Starting Create Volatile Files and Directories...
[  OK  ] Started Rule-based Manager for Device Events and Files.
[  OK  ] Finished Coldplug All udev Devices.
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Finished Create Volatile Files and Directories.
         Starting Rebuild Journal Catalog...
         Starting Network Time Synchronization...
         Starting Wait for udev To …plete Device Initialization...
         Starting Record System Boot/Shutdown in UTMP...
[  OK  ] Finished Rebuild Dynamic Linker Cache.
[  OK  ] Finished Rebuild Journal Catalog.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Finished Record System Boot/Shutdown in UTMP.
[  OK  ] Reached target System Time Set.
         Starting Update is Completed...
[  OK  ] Finished Update is Completed.
[   11.174957] usbcore: registered new device driver onboard-usb-hub
[   11.477539] etnaviv etnaviv: bound 59000000.gpu (ops gpu_ops [etnaviv])
[   11.484313] etnaviv-gpu 59000000.gpu: model: GC320, revision: 5301
[   11.505157] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0
[   11.617126] hub 1-1:1.0: USB hub found
[   11.622070] hub 1-1:1.0: 4 ports detected
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[   11.777160] hub 1-1:1.0: USB hub found
[   11.780975] hub 1-1:1.0: 4 ports detected
[   12.033996] hub 2-1:1.0: USB hub found
[   12.037841] hub 2-1:1.0: 4 ports detected
[   12.113342] hub 2-1:1.0: USB hub found
[   12.117187] hub 2-1:1.0: 4 ports detected
[  OK  ] Finished Wait for udev To Complete Device Initialization.
[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timer Units.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
         Starting sshd.socket...
[  OK  ] Listening on sshd.socket.
[  OK  ] Reached target Socket Units.
[  OK  ] Reached target Basic System.
[  OK  ] Started Kernel Logging Service.
[  OK  ] Started System Logging Service.
[  OK  ] Started Periodic Command Scheduler.
         Starting D-Bus System Message Bus...
[  OK  ] Started Getty on tty1.
         Starting IPv6 Packet Filtering Framework...
         Starting IPv4 Packet Filtering Framework...
         Starting Telephony service...
[  OK  ] Started Serial Getty on ttyS2.
[  OK  ] Reached target Login Prompts.
[   13.546081] Bluetooth: Core ver 2.22
[   13.555175] NET: Registered PF_BLUETOOTH protocol family
[   13.560516] Bluetooth: HCI device and connection manager initialized
[   13.566925] Bluetooth: HCI socket layer initialized
[   13.571838] Bluetooth: L2CAP socket layer initialized
[   13.576965] Bluetooth: SCO socket layer initialized
         Starting Resets System Activity Logs...
         Starting User Login Management...
         Starting OpenSSH Key Generation...
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Finished IPv6 Packet Filtering Framework.
[  OK  ] Finished IPv4 Packet Filtering Framework.
[  OK  ] Finished Resets System Activity Logs.
[  OK  ] Reached target Preparation for Network.
         Starting Network Configuration...
[  OK  ] Started Telephony service.
[  OK  ] Started User Login Management.
[   14.176635] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   14.256225] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  OK  ] Started Network Configuration.
[   14.356201] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac
         Starting Network Name Resolution...
[   14.504577] Micrel KSZ9031 Gigabit PHY 48485000.mdio:02: attached PHY driver (mii_bus:phy_addr=48485000.mdio:02, irq=POLL)
[   14.559631] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac
[   14.675628] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver (mii_bus:phy_addr=48485000.mdio:01, irq=POLL)
[  OK  ] Started Network Name Resolution.
[  OK  ] Reached target Network.
[  OK  ] Reached target Host and Network Name Lookups.
         Starting Avahi mDNS/DNS-SD Stack...
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Reached target Multi-User System.
         Starting Record Runlevel Change in UTMP...
[  OK  ] Finished Record Runlevel Change in UTMP.
[   16.656158] cpsw-switch 48484000.switch eth1: Link is Up - 100Mbps/Full - flow control off
[   16.664489] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   18.896118] cpsw-switch 48484000.switch eth0: Link is Up - 1Gbps/Full - flow control off
[   18.904296] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Linux-Kernel-Functional-Testing nodistro.0 am57xx-evm ttyS2

am57xx-evm login: root
root
7[r[999;999H[6n[   21.618377] platform 488c0000.omap_dwc3_2: deferred probe pending
[   21.624511] platform sound0: deferred probe pending
root@am57xx-evm:~# 

root@am57xx-evm:~# #
#
root@am57xx-evm:~# export SHELL=/bin/sh
export SHELL=/bin/sh
root@am57xx-evm:~# . /lava-5900484/environment
. /lava-5900484/environment
root@am57xx-evm:~# /lava-5900484/bin/lava-test-runner /lava-5900484/0
/lava-5900484/bin/lava-test-runner /lava-5900484/0
+ export TESTRUN_ID=0_prep-tmp-disk
+ TESTRUN_ID=0_prep-tmp-disk
+ cd /lava-5900484/0/tests/0_prep-tmp-disk
++ cat uuid
+ UUID=5900484_2.1.4.1
+ set +x
<LAVA_SIGNAL_STARTRUN 0_prep-tmp-disk 5900484_2.1.4.1>
++ lava-target-storage SATA
+ export STORAGE_DEV=/dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190703A00329
+ STORAGE_DEV=/dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190703A00329
+ test -n /dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190703A00329
+ echo y
+ mkfs.ext4 /dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190703A00329
mke2fs 1.46.5 (30-Dec-2021)
Discarding device blocks:        0/29306880 1048576/29306880 7864320/29306880[   30.527496] 8<--- cut here ---
[   30.530578] Unable to handle kernel paging request at virtual address f880350c
[   30.537841] [f880350c] *pgd=00000000
[   30.541442] Internal error: Oops: 5 [#1] SMP ARM
[   30.546081] Modules linked in: cfg80211 bluetooth etnaviv snd_soc_simple_card snd_soc_simple_card_utils gpu_sched onboard_usb_hub snd_soc_davinci_mcasp snd_soc_ti_udma snd_soc_ti_edma snd_soc_ti_sdma snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm snd_timer snd soundcore display_connector
[   30.571807] CPU: 0 PID: 287 Comm: rngd Not tainted 6.0.11-rc1 #1
[   30.577850] Hardware name: Generic DRA74X (Flattened Device Tree)
[   30.583984] PC is at l3_interrupt_handler+0x70/0x384
[   30.588958] LR is at 0x3
[   30.591522] pc : [<c089019c>]    lr : [<00000003>]    psr: 200d0193
[   30.597808] sp : f0001eb8  ip : 0000000c  fp : 00000000
[   30.603057] r10: 00000060  r9 : c226a320  r8 : 00000060
[   30.608306] r7 : f8000000  r6 : c39d4940  r5 : c210c8c0  r4 : c39e4200
[   30.614868] r3 : 00000000  r2 : f880350c  r1 : c210c64c  r0 : c39d4948
[   30.621429] Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   30.628692] Control: 10c5387d  Table: 84f3406a  DAC: 00000051
[   30.634460] Register r0 information: slab kmalloc-128 start c39d4900 pointer offset 72 size 128
[   30.643218] Register r1 information: non-slab/vmalloc memory
[   30.648895] Register r2 information: non-paged memory
[   30.653991] Register r3 information: NULL pointer
[   30.658721] Register r4 information: slab kmalloc-64 start c39e4200 pointer offset 0 size 64
[   30.667205] Register r5 information: non-slab/vmalloc memory
[   30.672912] Register r6 information: slab kmalloc-128 start c39d4900 pointer offset 64 size 128
[   30.681640] Register r7 information: 0-page vmalloc region starting at 0xf8000000 allocated at iotable_init+0x0/0xf4
[   30.692230] Register r8 information: non-paged memory
[   30.697326] Register r9 information: non-slab/vmalloc memory
[   30.703002] Register r10 information: non-paged memory
[   30.708160] Register r11 information: NULL pointer
[   30.712982] Register r12 information: non-paged memory
[   30.718139] Process rngd (pid: 287, stack limit = 0x49af5199)
[   30.723937] Stack: (0xf0001eb8 to 0xf0002000)
[   30.728302] 1ea0:                                                       00000008 f0001f10
[   30.736511] 1ec0: c2f43480 00000003 00000406 c087457c c3b82024 00000001 00000000 00000001
[   30.744750] 1ee0: c2f43480 00000000 00000000 8b7f63d6 c3b80200 c3b82024 00000001 c2f43480
[   30.752960] 1f00: c2d3b800 00000100 c2003080 c0796ab0 00000000 8b7f63d6 00000000 c49e0e00
[   30.761169] 1f20: 00000000 00000000 c3b82000 c0bf797c c49e0ea8 00000000 c2f43480 c49e0e00
[   30.769378] 1f40: c226a320 8b7f63d6 c49e0ea8 c39e4200 c2013a68 00000000 c39d3700 c226a340
[   30.777618] 1f60: c226a320 00000060 c2f43480 c03b85e8 c2003094 00000000 c2009f50 c2269993
[   30.785827] 1f80: c226a320 c39d3700 c2013a68 c39d376c c1f97510 fa21200c f0001fd0 9e97da7a
[   30.794036] 1fa0: f12adfa8 c03b87d8 c39d3700 c2013a68 fa212000 c03bd2e0 c200aa08 c210a274
[   30.802276] 1fc0: fa212000 c03b7d8c c200aa08 c0301804 c1f97504 f12adfb0 00000000 c2f43480
[   30.810485] 1fe0: c1f91044 6ad6d48f 9e97da7a c130b0d8 b6f22d36 800d0030 ffffffff c08597bc
[   30.818695]  l3_interrupt_handler from __handle_irq_event_percpu+0xa0/0x1fc
[   30.825714]  __handle_irq_event_percpu from handle_irq_event+0x4c/0x94
[   30.832275]  handle_irq_event from handle_fasteoi_irq+0xa0/0x194
[   30.838317]  handle_fasteoi_irq from generic_handle_domain_irq+0x30/0x40
[   30.845031]  generic_handle_domain_irq from gic_handle_irq+0x90/0xb0
[   30.851440]  gic_handle_irq from generic_handle_arch_irq+0x34/0x44
[   30.857666]  generic_handle_arch_irq from call_with_stack+0x18/0x20
[   30.863952]  call_with_stack from __irq_usr+0x7c/0xa0
[   30.869049] Exception stack(0xf12adfb0 to 0xf12adff8)
[   30.874114] dfa0:                                     9e97da7a 6ad6d48f 9e97da7a 6ad6d48f
[   30.882324] dfc0: 00000002 00000000 00000000 b6b9e8e8 9e97da78 6ad6d48f 9e97da7a 6ad6d48f
[   30.890563] dfe0: 00000000 b6b9e8e8 b6f23701 b6f22d36 800d0030 ffffffff
[   30.897186] Code: e4907004 e5952000 e08c2002 e0872002 (e5924000) 
[   30.903320] ---[ end trace 0000000000000000 ]---
[   30.907958] Kernel panic - not syncing: Fatal exception in interrupt
[   30.914367] CPU1: stopping
[   30.917083] CPU: 1 PID: 291 Comm: rngd Tainted: G      D            6.0.11-rc1 #1
[   30.924591] Hardware name: Generic DRA74X (Flattened Device Tree)
[   30.930725]  unwind_backtrace from show_stack+0x18/0x1c
[   30.935974]  show_stack from dump_stack_lvl+0x58/0x70
[   30.941070]  dump_stack_lvl from do_handle_IPI+0x2e0/0x318
[   30.946594]  do_handle_IPI from ipi_handler+0x20/0x28
[   30.951660]  ipi_handler from handle_percpu_devid_irq+0x94/0x1e8
[   30.957702]  handle_percpu_devid_irq from generic_handle_domain_irq+0x30/0x40
[   30.964874]  generic_handle_domain_irq from gic_handle_irq+0x90/0xb0
[   30.971282]  gic_handle_irq from generic_handle_arch_irq+0x34/0x44
[   30.977478]  generic_handle_arch_irq from call_with_stack+0x18/0x20
[   30.983795]  call_with_stack from __irq_svc+0x9c/0xb8
[   30.988861] Exception stack(0xf12a5ef8 to 0xf12a5f40)
[   30.993927] 5ee0:                                                       0011baa7 00000000
[   31.002166] 5f00: 626ad21a 0000270a 00000000 c22c9480 f12a5f80 00001706 c03002f0 c2f47380
[   31.010375] 5f20: 00000193 becec000 f12a5f24 f12a5f48 c03e98b8 c03e98bc 600f0013 ffffffff
[   31.018585]  __irq_svc from ktime_get_real_ts64+0x58/0x174
[   31.024108]  ktime_get_real_ts64 from posix_get_realtime_timespec+0x14/0x1c
[   31.031127]  posix_get_realtime_timespec from sys_clock_gettime+0x64/0xc8
[   31.037933]  sys_clock_gettime from __sys_trace_return+0x0/0x10
[   31.043884] Exception stack(0xf12a5fa8 to 0xf12a5ff0)
[   31.048980] 5fa0:                   00000000 b61fea18 00000000 b61fea18 00000000 00000000
[   31.057189] 5fc0: 00000000 b61fea18 b61feacc 00000193 000172a0 00000000 b59ff000 becec000
[   31.065399] 5fe0: becec020 b61fe9c0 beced55c beced6b8
[   31.070465] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux