[PATCH 6.0 106/289] net/mlx5: SF: Fix probing active SFs during driver probe phase

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Shay Drory <shayd@xxxxxxxxxx>

[ Upstream commit 4f57332d6a551185ba729617f04455e83fbe4e41 ]

When SF devices and SF port representors are located on different
functions, unloading and reloading of SF parent driver doesn't recreate
the existing SF present in the device.
Fix it by querying SFs and probe active SFs during driver probe phase.

Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support")
Signed-off-by: Shay Drory <shayd@xxxxxxxxxx>
Reviewed-by: Parav Pandit <parav@xxxxxxxxxx>
Signed-off-by: Saeed Mahameed <saeedm@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 .../ethernet/mellanox/mlx5/core/sf/dev/dev.c  | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c
index 7da012ff0d41..8e2abbab05f0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c
@@ -18,6 +18,10 @@ struct mlx5_sf_dev_table {
 	phys_addr_t base_address;
 	u64 sf_bar_length;
 	struct notifier_block nb;
+	struct mutex table_lock; /* Serializes sf life cycle and vhca state change handler */
+	struct workqueue_struct *active_wq;
+	struct work_struct work;
+	u8 stop_active_wq:1;
 	struct mlx5_core_dev *dev;
 };
 
@@ -168,6 +172,7 @@ mlx5_sf_dev_state_change_handler(struct notifier_block *nb, unsigned long event_
 		return 0;
 
 	sf_index = event->function_id - base_id;
+	mutex_lock(&table->table_lock);
 	sf_dev = xa_load(&table->devices, sf_index);
 	switch (event->new_vhca_state) {
 	case MLX5_VHCA_STATE_INVALID:
@@ -191,6 +196,7 @@ mlx5_sf_dev_state_change_handler(struct notifier_block *nb, unsigned long event_
 	default:
 		break;
 	}
+	mutex_unlock(&table->table_lock);
 	return 0;
 }
 
@@ -215,6 +221,78 @@ static int mlx5_sf_dev_vhca_arm_all(struct mlx5_sf_dev_table *table)
 	return 0;
 }
 
+static void mlx5_sf_dev_add_active_work(struct work_struct *work)
+{
+	struct mlx5_sf_dev_table *table = container_of(work, struct mlx5_sf_dev_table, work);
+	u32 out[MLX5_ST_SZ_DW(query_vhca_state_out)] = {};
+	struct mlx5_core_dev *dev = table->dev;
+	u16 max_functions;
+	u16 function_id;
+	u16 sw_func_id;
+	int err = 0;
+	u8 state;
+	int i;
+
+	max_functions = mlx5_sf_max_functions(dev);
+	function_id = MLX5_CAP_GEN(dev, sf_base_id);
+	for (i = 0; i < max_functions; i++, function_id++) {
+		if (table->stop_active_wq)
+			return;
+		err = mlx5_cmd_query_vhca_state(dev, function_id, out, sizeof(out));
+		if (err)
+			/* A failure of specific vhca doesn't mean others will
+			 * fail as well.
+			 */
+			continue;
+		state = MLX5_GET(query_vhca_state_out, out, vhca_state_context.vhca_state);
+		if (state != MLX5_VHCA_STATE_ACTIVE)
+			continue;
+
+		sw_func_id = MLX5_GET(query_vhca_state_out, out, vhca_state_context.sw_function_id);
+		mutex_lock(&table->table_lock);
+		/* Don't probe device which is already probe */
+		if (!xa_load(&table->devices, i))
+			mlx5_sf_dev_add(dev, i, function_id, sw_func_id);
+		/* There is a race where SF got inactive after the query
+		 * above. e.g.: the query returns that the state of the
+		 * SF is active, and after that the eswitch manager set it to
+		 * inactive.
+		 * This case cannot be managed in SW, since the probing of the
+		 * SF is on one system, and the inactivation is on a different
+		 * system.
+		 * If the inactive is done after the SF perform init_hca(),
+		 * the SF will fully probe and then removed. If it was
+		 * done before init_hca(), the SF probe will fail.
+		 */
+		mutex_unlock(&table->table_lock);
+	}
+}
+
+/* In case SFs are generated externally, probe active SFs */
+static int mlx5_sf_dev_queue_active_work(struct mlx5_sf_dev_table *table)
+{
+	if (MLX5_CAP_GEN(table->dev, eswitch_manager))
+		return 0; /* the table is local */
+
+	/* Use a workqueue to probe active SFs, which are in large
+	 * quantity and may take up to minutes to probe.
+	 */
+	table->active_wq = create_singlethread_workqueue("mlx5_active_sf");
+	if (!table->active_wq)
+		return -ENOMEM;
+	INIT_WORK(&table->work, &mlx5_sf_dev_add_active_work);
+	queue_work(table->active_wq, &table->work);
+	return 0;
+}
+
+static void mlx5_sf_dev_destroy_active_work(struct mlx5_sf_dev_table *table)
+{
+	if (table->active_wq) {
+		table->stop_active_wq = true;
+		destroy_workqueue(table->active_wq);
+	}
+}
+
 void mlx5_sf_dev_table_create(struct mlx5_core_dev *dev)
 {
 	struct mlx5_sf_dev_table *table;
@@ -240,11 +318,17 @@ void mlx5_sf_dev_table_create(struct mlx5_core_dev *dev)
 	table->base_address = pci_resource_start(dev->pdev, 2);
 	table->max_sfs = max_sfs;
 	xa_init(&table->devices);
+	mutex_init(&table->table_lock);
 	dev->priv.sf_dev_table = table;
 
 	err = mlx5_vhca_event_notifier_register(dev, &table->nb);
 	if (err)
 		goto vhca_err;
+
+	err = mlx5_sf_dev_queue_active_work(table);
+	if (err)
+		goto add_active_err;
+
 	err = mlx5_sf_dev_vhca_arm_all(table);
 	if (err)
 		goto arm_err;
@@ -252,6 +336,8 @@ void mlx5_sf_dev_table_create(struct mlx5_core_dev *dev)
 	return;
 
 arm_err:
+	mlx5_sf_dev_destroy_active_work(table);
+add_active_err:
 	mlx5_vhca_event_notifier_unregister(dev, &table->nb);
 vhca_err:
 	table->max_sfs = 0;
@@ -279,7 +365,9 @@ void mlx5_sf_dev_table_destroy(struct mlx5_core_dev *dev)
 	if (!table)
 		return;
 
+	mlx5_sf_dev_destroy_active_work(table);
 	mlx5_vhca_event_notifier_unregister(dev, &table->nb);
+	mutex_destroy(&table->table_lock);
 
 	/* Now that event handler is not running, it is safe to destroy
 	 * the sf device without race.
-- 
2.35.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux