From: Steve Su <steve.su@xxxxxxx>
[ Upstream commit c0b2753f5db281b07013899c79b5f06a614055f9 ]
[Why]
1. Port of gpio has different mapping.
[How]
1. Add a dummy entry in mapping table.
2. Fix incorrect mask bit field access.
Reviewed-by: Alvin Lee <Alvin.Lee2@xxxxxxx>
Acked-by: Alan Liu <HaoPing.Liu@xxxxxxx>
Signed-off-by: Steve Su <steve.su@xxxxxxx>
Tested-by: Daniel Wheeler <daniel.wheeler@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../amd/display/dc/gpio/dcn32/hw_factory_dcn32.c | 14 ++++++++++++++
drivers/gpu/drm/amd/display/dc/gpio/hw_ddc.c | 9 ++++++---
2 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/gpio/dcn32/hw_factory_dcn32.c b/drivers/gpu/drm/amd/display/dc/gpio/dcn32/hw_factory_dcn32.c
index d635b73af46f..0ea52ba5ac82 100644
--- a/drivers/gpu/drm/amd/display/dc/gpio/dcn32/hw_factory_dcn32.c
+++ b/drivers/gpu/drm/amd/display/dc/gpio/dcn32/hw_factory_dcn32.c
@@ -107,6 +107,13 @@ static const struct ddc_registers ddc_data_regs_dcn[] = {
ddc_data_regs_dcn2(3),
ddc_data_regs_dcn2(4),
ddc_data_regs_dcn2(5),
+ {
+ // add a dummy entry for cases no such port
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,},
+ .ddc_setup = 0,
+ .phy_aux_cntl = 0,
+ .dc_gpio_aux_ctrl_5 = 0
+ },
{
DDC_GPIO_VGA_REG_LIST(DATA),
.ddc_setup = 0,
@@ -121,6 +128,13 @@ static const struct ddc_registers ddc_clk_regs_dcn[] = {
ddc_clk_regs_dcn2(3),
ddc_clk_regs_dcn2(4),
ddc_clk_regs_dcn2(5),
+ {
+ // add a dummy entry for cases no such port
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,},
+ .ddc_setup = 0,
+ .phy_aux_cntl = 0,
+ .dc_gpio_aux_ctrl_5 = 0
+ },
{
DDC_GPIO_VGA_REG_LIST(CLK),
.ddc_setup = 0,
diff --git a/drivers/gpu/drm/amd/display/dc/gpio/hw_ddc.c b/drivers/gpu/drm/amd/display/dc/gpio/hw_ddc.c
index 6fd38cdd68c0..525bc8881950 100644
--- a/drivers/gpu/drm/amd/display/dc/gpio/hw_ddc.c
+++ b/drivers/gpu/drm/amd/display/dc/gpio/hw_ddc.c
@@ -94,11 +94,14 @@ static enum gpio_result set_config(
* is required for detection of AUX mode */
if (hw_gpio->base.en != GPIO_DDC_LINE_VIP_PAD) {
if (!ddc_data_pd_en || !ddc_clk_pd_en) {
-
- REG_SET_2(gpio.MASK_reg, regval,
+ if (hw_gpio->base.en == GPIO_DDC_LINE_DDC_VGA) {
+ // bit 4 of mask has different usage in some cases
+ REG_SET(gpio.MASK_reg, regval, DC_GPIO_DDC1DATA_PD_EN, 1);
+ } else {
+ REG_SET_2(gpio.MASK_reg, regval,
DC_GPIO_DDC1DATA_PD_EN, 1,
DC_GPIO_DDC1CLK_PD_EN, 1);
-
+ }
if (config_data->type ==
GPIO_CONFIG_TYPE_I2C_AUX_DUAL_MODE)
msleep(3);
--
2.35.1
