From: Ulf Hansson <ulf.hansson@xxxxxxxxxx> [ Upstream commit cadaa773bcf161184fa428180516bae33a7bc667 ] To support the deeper cluster idle state for sm8250 platforms, some additional synchronization is needed between the rpmh-rsc device and the CPU cluster PM domain. Until that is supported, let's disable the cluster idle state. This fixes a problem that has been reported for the Qcom RB5 platform (see below), but most likely other sm8250 platforms suffers from similar issues, so let's make the fix generic for sm8250. vreg_l11c_3p3: failed to enable: -ETIMEDOUT qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110 qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110 Reported-by: Amit Pundir <amit.pundir@xxxxxxxxxx> Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states") Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Tested-by: Amit Pundir <amit.pundir@xxxxxxxxxx> Reviewed-by: Sudeep Holla <sudeep.holla@xxxxxxx> Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Link: https://lore.kernel.org/r/20221027115745.240516-1-ulf.hansson@xxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index bc773e210023..052b4dbc1ee4 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -334,6 +334,7 @@ CLUSTER_SLEEP_0: cluster-sleep-0 { exit-latency-us = <6562>; min-residency-us = <9987>; local-timer-stop; + status = "disabled"; }; }; }; -- 2.35.1