From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> commit 7090abd6ad0610a144523ce4ffcb8560909bf2a8 upstream. Configure DMA to use 16B burst size with Elkhart Lake. This makes the bus use more efficient and works around an issue which occurs with the previously used 1B. The fix was initially developed by Srikanth Thokala and Aman Kumar. This together with the previous config change is the cleaned up version of the original fix. Fixes: 0a9410b981e9 ("serial: 8250_lpss: Enable DMA on Intel Elkhart Lake") Cc: <stable@xxxxxxxxxxxxxxx> # serial: 8250_lpss: Configure DMA also w/o DMA filter Reported-by: Wentong Wu <wentong.wu@xxxxxxxxx> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20221108121952.5497-4-ilpo.jarvinen@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/tty/serial/8250/8250_lpss.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -177,6 +177,9 @@ static int ehl_serial_setup(struct lpss8 * matching with the registered General Purpose DMA controllers. */ up->dma = dma; + + lpss->dma_maxburst = 16; + return 0; }