It can take more than one second to check each connector
when the system is resumed. So if you have, say, eight
connectors, it may take eight seconds for ucsi_resume() to
finish. That's a bit too much.
This will modify ucsi_resume() so that it schedules a work
where the interface is actually resumed instead of checking
the connectors directly. The connections will also be
checked in separate tasks which are queued for each connector
separately.
Reported-by: Todd Brandt <todd.e.brandt@xxxxxxxxx>
Fixes: f9f019f7d849 ("usb: typec: ucsi: Resume in separate work")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216706
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
drivers/usb/typec/ucsi/ucsi.c | 17 +++++++++++++----
drivers/usb/typec/ucsi/ucsi.h | 1 +
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index a7987fc764cc6..eabe519013e78 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1270,8 +1270,9 @@ static int ucsi_init(struct ucsi *ucsi)
return ret;
}
-int ucsi_resume(struct ucsi *ucsi)
+static void ucsi_resume_work(struct work_struct *work)
{
+ struct ucsi *ucsi = container_of(work, struct ucsi, resume_work);
struct ucsi_connector *con;
u64 command;
int ret;
@@ -1279,15 +1280,21 @@ int ucsi_resume(struct ucsi *ucsi)
/* Restore UCSI notification enable mask after system resume */
command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy;
ret = ucsi_send_command(ucsi, command, NULL, 0);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ dev_err(ucsi->dev, "failed to re-enable notifications (%d)\n", ret);
+ return;
+ }
for (con = ucsi->connector; con->port; con++) {
mutex_lock(&con->lock);
- ucsi_check_connection(con);
+ ucsi_partner_task(con, ucsi_check_connection, 1, 0);
mutex_unlock(&con->lock);
}
+}
+int ucsi_resume(struct ucsi *ucsi)
+{
+ queue_work(system_long_wq, &ucsi->resume_work);
return 0;
}
EXPORT_SYMBOL_GPL(ucsi_resume);
@@ -1347,6 +1354,7 @@ struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops)
if (!ucsi)
return ERR_PTR(-ENOMEM);
+ INIT_WORK(&ucsi->resume_work, ucsi_resume_work);
INIT_DELAYED_WORK(&ucsi->work, ucsi_init_work);
mutex_init(&ucsi->ppm_lock);
ucsi->dev = dev;
@@ -1401,6 +1409,7 @@ void ucsi_unregister(struct ucsi *ucsi)
/* Make sure that we are not in the middle of driver initialization */
cancel_delayed_work_sync(&ucsi->work);
+ cancel_work_sync(&ucsi->resume_work);
/* Disable notifications */
ucsi->ops->async_write(ucsi, UCSI_CONTROL, &cmd, sizeof(cmd));
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 8eb391e3e592c..c968474ee5473 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -287,6 +287,7 @@ struct ucsi {
struct ucsi_capability cap;
struct ucsi_connector *connector;
+ struct work_struct resume_work;
struct delayed_work work;
int work_count;
#define UCSI_ROLE_SWITCH_RETRY_PER_HZ 10
--
2.35.1
