[PATCH 6.0 106/190] ethernet: s2io: disable napi when start nic failed in s2io_card_up()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Zhengchao Shao <shaozhengchao@xxxxxxxxxx>

[ Upstream commit 0348c1ab980c1d43fb37b758d4b760990c066cb5 ]

When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.

Fixes: 5f490c968056 ("S2io: Fixed synchronization between scheduling of napi with card reset and close")
Signed-off-by: Zhengchao Shao <shaozhengchao@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@xxxxxxxxxx
Signed-off-by: Paolo Abeni <pabeni@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/ethernet/neterion/s2io.c | 29 +++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 30f955efa830..8f74c039b3be 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -7128,9 +7128,8 @@ static int s2io_card_up(struct s2io_nic *sp)
 		if (ret) {
 			DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
 				  dev->name);
-			s2io_reset(sp);
-			free_rx_buffers(sp);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto err_fill_buff;
 		}
 		DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
 			  ring->rx_bufs_left);
@@ -7168,18 +7167,16 @@ static int s2io_card_up(struct s2io_nic *sp)
 	/* Enable Rx Traffic and interrupts on the NIC */
 	if (start_nic(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
-		s2io_reset(sp);
-		free_rx_buffers(sp);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_out;
 	}
 
 	/* Add interrupt service routine */
 	if (s2io_add_isr(sp) != 0) {
 		if (sp->config.intr_type == MSI_X)
 			s2io_rem_isr(sp);
-		s2io_reset(sp);
-		free_rx_buffers(sp);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_out;
 	}
 
 	timer_setup(&sp->alarm_timer, s2io_alarm_handle, 0);
@@ -7199,6 +7196,20 @@ static int s2io_card_up(struct s2io_nic *sp)
 	}
 
 	return 0;
+
+err_out:
+	if (config->napi) {
+		if (config->intr_type == MSI_X) {
+			for (i = 0; i < sp->config.rx_ring_num; i++)
+				napi_disable(&sp->mac_control.rings[i].napi);
+		} else {
+			napi_disable(&sp->napi);
+		}
+	}
+err_fill_buff:
+	s2io_reset(sp);
+	free_rx_buffers(sp);
+	return ret;
 }
 
 /**
-- 
2.35.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux