> -----Original Message----- > From: Jakub Kicinski <kuba@xxxxxxxxxx> > Sent: Thursday, 10 November, 2022 10:42 AM > To: Jamaluddin, Aminuddin <aminuddin.jamaluddin@xxxxxxxxx> > Cc: Andrew Lunn <andrew@xxxxxxx>; Heiner Kallweit > <hkallweit1@xxxxxxxxx>; Russell King <linux@xxxxxxxxxxxxxxx>; David S . > Miller <davem@xxxxxxxxxxxxx>; Eric Dumazet <edumazet@xxxxxxxxxx>; > Paolo Abeni <pabeni@xxxxxxxxxx>; Ismail, Mohammad Athari > <mohammad.athari.ismail@xxxxxxxxx>; netdev@xxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; stable@xxxxxxxxxxxxxxx; Tan, Tee Min > <tee.min.tan@xxxxxxxxx>; Zulkifli, Muhammad Husaini > <muhammad.husaini.zulkifli@xxxxxxxxx>; Looi, Hong Aun > <hong.aun.looi@xxxxxxxxx> > Subject: Re: [PATCH net-next v2] net: phy: marvell: add sleep time after > enabling the loopback bit > > On Tue, 8 Nov 2022 15:40:05 +0800 Aminuddin Jamaluddin wrote: > > Subject: [PATCH net-next v2] net: phy: marvell: add sleep time after > > enabling the loopback bit > > Looks like v1 was tagged for net, why switch to net-next? > It's either a fix or not, we don't do gray scales in netdev. > > > Sleep time is added to ensure the phy to be ready after loopback bit > > was set. This to prevent the phy loopback test from failing. > > > > --- > > V1: > > > https://patchwork.kernel.org/project/netdevbpf/patch/20220825082238.11 > > 056-1-aminuddin.jamaluddin@xxxxxxxxx/ > > --- > > git am will cut off at the first --- it finds, so the v1 link and all the tags below > we'll be lost when the patch is applied. Please move this section after the > tags. > Ok noted will correct this with V3 > > Fixes: 020a45aff119 ("net: phy: marvell: add Marvell specific PHY > > loopback") > > Cc: <stable@xxxxxxxxxxxxxxx> # 5.15.x > > Signed-off-by: Muhammad Husaini Zulkifli > > <muhammad.husaini.zulkifli@xxxxxxxxx> > > Signed-off-by: Aminuddin Jamaluddin <aminuddin.jamaluddin@xxxxxxxxx> Amin
