From: Marek Vasut <marex@xxxxxxx>
[ Upstream commit f23f1a1e8437e38014fe34a2f12e37e861e5bcc7 ]
Enable CPLD_Dn pull down resistor instead of pull up to avoid
intefering with CPLD power off functionality.
Fixes: 510c527b4ff57 ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board")
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Reviewed-by: Fabio Estevam <festevam@xxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
index 32f6f2f50c10..43e89859c044 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -250,21 +250,21 @@ MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4
/* SODIMM 96 */
MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4
/* CPLD_D[7] */
- MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x184
/* CPLD_D[6] */
- MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4
+ MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x184
/* CPLD_D[5] */
- MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4
+ MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x184
/* CPLD_D[4] */
- MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4
+ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x184
/* CPLD_D[3] */
- MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4
+ MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x184
/* CPLD_D[2] */
- MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4
+ MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x184
/* CPLD_D[1] */
- MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4
+ MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x184
/* CPLD_D[0] */
- MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4
+ MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x184
/* KBD_intK */
MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1c4
/* DISP_reset */
--
2.35.1
