From: Ioana Ciornei <ioana.ciornei@xxxxxxx>
[ Upstream commit d5c921a53c80dfa942f6dff36253db5a50775a5f ]
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: 0420dde30a90 ("arm64: dts: ls208xa: add the external MDIO nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index d76f1c42f3fa..7bb33933c2cb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -533,6 +533,9 @@ emdio1: mdio@8b96000 {
little-endian;
#address-cells = <1>;
#size-cells = <0>;
+ clock-frequency = <2500000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -542,6 +545,9 @@ emdio2: mdio@8b97000 {
little-endian;
#address-cells = <1>;
#size-cells = <0>;
+ clock-frequency = <2500000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
--
2.35.1
