From: Ioana Ciornei <ioana.ciornei@xxxxxxx> [ Upstream commit c126a0abc5dadd7df236f20aae6d8c3d103f095c ] Up until now, the external MDIO controller frequency values relied either on the default ones out of reset or on those setup by u-boot. Let's just properly specify the MDC frequency in the DTS so that even without u-boot's intervention Linux can drive the MDIO bus. Fixes: 6e1b8fae892d ("arm64: dts: lx2160a: add emdio1 node") Fixes: 5705b9dcda57 ("arm64: dts: lx2160a: add emdio2 node") Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 83072da6f6c6..8115cdcb4574 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -1292,6 +1292,9 @@ emdio1: mdio@8b96000 { #address-cells = <1>; #size-cells = <0>; little-endian; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -1302,6 +1305,9 @@ emdio2: mdio@8b97000 { little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; -- 2.35.1