From: Jason Gerecke <killertofu@xxxxxxxxx> When support was added for devices using an explicit 3rd barrel switch, the logic used by devices emulating this feature was broken. The 'if' statement / block that was introduced only handles the case where the button is pressed (i.e. 'barrelswitch' and 'barrelswitch2' are both set) but not the case where it is released (i.e. one or both being cleared). This results in a BTN_STYLUS3 "down" event being sent when the button is pressed, but no "up" event ever being sent afterwards. This patch restores the previously-used logic for determining button states in the emulated case so that switches are reported correctly again. Link: https://github.com/linuxwacom/xf86-input-wacom/issues/292 Fixes: 6d09085b38e5 ("HID: wacom: Adding Support for new usages") CC: stable@xxxxxxxxxxxxxxx #v5.19+ Signed-off-by: Jason Gerecke <jason.gerecke@xxxxxxxxx> Tested-by: Joshua Dickens <joshua.dickens@xxxxxxxxx> Reviewed-by: Ping Cheng <ping.cheng@xxxxxxxxx> --- drivers/hid/wacom_wac.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 77486962a773f..0f3d57b426846 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -2520,11 +2520,12 @@ static void wacom_wac_pen_report(struct hid_device *hdev, if (!delay_pen_events(wacom_wac) && wacom_wac->tool[0]) { int id = wacom_wac->id[0]; - if (wacom_wac->features.quirks & WACOM_QUIRK_PEN_BUTTON3 && - wacom_wac->hid_data.barrelswitch & wacom_wac->hid_data.barrelswitch2) { - wacom_wac->hid_data.barrelswitch = 0; - wacom_wac->hid_data.barrelswitch2 = 0; - wacom_wac->hid_data.barrelswitch3 = 1; + if (wacom_wac->features.quirks & WACOM_QUIRK_PEN_BUTTON3) { + int sw_state = wacom_wac->hid_data.barrelswitch | + (wacom_wac->hid_data.barrelswitch2 << 1); + wacom_wac->hid_data.barrelswitch = sw_state == 1; + wacom_wac->hid_data.barrelswitch2 = sw_state == 2; + wacom_wac->hid_data.barrelswitch3 = sw_state == 3; } input_report_key(input, BTN_STYLUS, wacom_wac->hid_data.barrelswitch); input_report_key(input, BTN_STYLUS2, wacom_wac->hid_data.barrelswitch2); -- 2.38.1
