[PATCH 5.4 02/64] can: kvaser_usb: Fix possible completions during init_completion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Anssi Hannula <anssi.hannula@xxxxxxxxxx>

commit 2871edb32f4622c3a25ce4b3977bad9050b91974 upstream.

kvaser_usb uses completions to signal when a response event is received
for outgoing commands.

However, it uses init_completion() to reinitialize the start_comp and
stop_comp completions before sending the start/stop commands.

In case the device sends the corresponding response just before the
actual command is sent, complete() may be called concurrently with
init_completion() which is not safe.

This might be triggerable even with a properly functioning device by
stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which
also causes the driver to send CMD_STOP_CHIP when restart-ms is off),
but that was not tested.

Fix the issue by using reinit_completion() instead.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@xxxxxxxxxx>
Signed-off-by: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
Signed-off-by: Jimmy Assarsson <extja@xxxxxxxxxx>
Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@xxxxxxxxxx
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c |    4 ++--
 drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c  |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
@@ -1845,7 +1845,7 @@ static int kvaser_usb_hydra_start_chip(s
 {
 	int err;
 
-	init_completion(&priv->start_comp);
+	reinit_completion(&priv->start_comp);
 
 	err = kvaser_usb_hydra_send_simple_cmd(priv->dev, CMD_START_CHIP_REQ,
 					       priv->channel);
@@ -1863,7 +1863,7 @@ static int kvaser_usb_hydra_stop_chip(st
 {
 	int err;
 
-	init_completion(&priv->stop_comp);
+	reinit_completion(&priv->stop_comp);
 
 	/* Make sure we do not report invalid BUS_OFF from CMD_CHIP_STATE_EVENT
 	 * see comment in kvaser_usb_hydra_update_state()
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -1324,7 +1324,7 @@ static int kvaser_usb_leaf_start_chip(st
 {
 	int err;
 
-	init_completion(&priv->start_comp);
+	reinit_completion(&priv->start_comp);
 
 	err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_START_CHIP,
 					      priv->channel);
@@ -1342,7 +1342,7 @@ static int kvaser_usb_leaf_stop_chip(str
 {
 	int err;
 
-	init_completion(&priv->stop_comp);
+	reinit_completion(&priv->stop_comp);
 
 	err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_STOP_CHIP,
 					      priv->channel);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux