From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
commit 34cd2db408d591bc15771cbcc90939ade0a99a21 upstream.
Systems based on Alder Lake P see significant boot time delay if
boot firmware tries to control usb ports in unexpected link states.
This is seen with self-powered usb devices that survive in U3 link
suspended state over S5.
A more generic solution to power off ports at shutdown was attempted in
commit 83810f84ecf1 ("xhci: turn off port power in shutdown")
but it caused regression.
Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and
ports back to default state in shutdown.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/host/xhci-pci.c | 4 ++++
drivers/usb/host/xhci.c | 10 ++++++++--
drivers/usb/host/xhci.h | 1 +
3 files changed, 13 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -258,6 +258,10 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_MISSING_CAS;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI)
+ xhci->quirks |= XHCI_RESET_TO_DEFAULT;
+
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI ||
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -810,9 +810,15 @@ void xhci_shutdown(struct usb_hcd *hcd)
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
- /* Workaround for spurious wakeups at shutdown with HSW */
- if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+
+ /*
+ * Workaround for spurious wakeps at shutdown with HSW, and for boot
+ * firmware delay in ADL-P PCH if port are left in U3 at shutdown
+ */
+ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP ||
+ xhci->quirks & XHCI_RESET_TO_DEFAULT)
xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+
spin_unlock_irq(&xhci->lock);
xhci_cleanup_msix(xhci);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1900,6 +1900,7 @@ struct xhci_hcd {
#define XHCI_BROKEN_D3COLD BIT_ULL(41)
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
#define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43)
+#define XHCI_RESET_TO_DEFAULT BIT_ULL(44)
unsigned int num_active_eps;
unsigned int limit_active_eps;
