Garbage FCoE CT frames are transmitted on the wire because of bad DMA ptr addresses filled in the GEN_REQ_WQE. The __lpfc_sli_prep_gen_req_s4() routine is using the wrong buffer for the payload address. Change the DMA buffer assignment from the bmp buffer to the bpl buffer. Link: https://lore.kernel.org/r/20220506205548.61644-1-jsmart2021@xxxxxxxxx Fixes: 61910d6a5243 ("scsi: lpfc: SLI path split: Refactor CT paths") Co-developed-by: Justin Tee <justin.tee@xxxxxxxxxxxx> Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx> Signed-off-by: James Smart <jsmart2021@xxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> --- drivers/scsi/lpfc/lpfc_sli.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 534f9c163874..0da462ba9077 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -10718,10 +10718,10 @@ __lpfc_sli_prep_gen_req_s4(struct lpfc_iocbq *cmdiocbq, struct lpfc_dmabuf *bmp, /* Words 0 - 2 */ bde = (struct ulp_bde64_le *)&cmdwqe->generic.bde; - bde->addr_low = cpu_to_le32(putPaddrLow(bmp->phys)); - bde->addr_high = cpu_to_le32(putPaddrHigh(bmp->phys)); + bde->addr_low = bpl->addr_low; + bde->addr_high = bpl->addr_high; bde->type_size = cpu_to_le32(xmit_len); - bde->type_size |= cpu_to_le32(ULP_BDE64_TYPE_BLP_64); + bde->type_size |= cpu_to_le32(ULP_BDE64_TYPE_BDE_64); /* Word 3 */ cmdwqe->gen_req.request_payload_len = xmit_len; -- 2.35.3
