From: Matt Ranostay <mranostay@xxxxxx>
[ Upstream commit 0d0a0b4413460383331088b2203ba09a6971bc3a ]
Range size of 0x2b4 was incorrect since there isn't 173 configurable
pins for muxing. Additionally there is a non-addressable region in the
mapping which requires splitting into two ranges.
main_pmx0 -> 67 pins
main_pmx1 -> 3 pins
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Signed-off-by: Matt Ranostay <mranostay@xxxxxx>
Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
Tested-by: Vaishnav Achath <vaishnav.a@xxxxxx>
Link: https://lore.kernel.org/r/20220919205723.8342-1-mranostay@xxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 10 ++++++----
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 11 ++++++++++-
2 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index d14f3c18b65f..c3406e7f10a9 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -131,15 +131,17 @@
>;
};
- main_usbss0_pins_default: main-usbss0-pins-default {
+ vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
pinctrl-single,pins = <
- J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
+ J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
>;
};
+};
- vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
+&main_pmx1 {
+ main_usbss0_pins_default: main-usbss0-pins-default {
pinctrl-single,pins = <
- J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
+ J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
>;
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 000b5732ea0c..b1df17525dea 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -295,7 +295,16 @@
main_pmx0: pinctrl@11c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
- reg = <0x00 0x11c000 0x00 0x2b4>;
+ reg = <0x00 0x11c000 0x00 0x10c>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ main_pmx1: pinctrl@11c11c {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x11c11c 0x00 0xc>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
--
2.35.1
