From: Hari Chandrakanthan <quic_haric@xxxxxxxxxxx>
[ Upstream commit 6b75f133fe05c36c52d691ff21545d5757fff721 ]
>From 'IEEE Std 802.11-2020 section 11.8.8.4.1':
The mesh channel switch may be triggered by the need to avoid
interference to a detected radar signal, or to reassign mesh STA
channels to ensure the MBSS connectivity.
A 20/40 MHz MBSS may be changed to a 20 MHz MBSS and a 20 MHz
MBSS may be changed to a 20/40 MHz MBSS.
Since the standard allows the change of bandwidth during
the channel switch in mesh, remove the bandwidth check present in
ieee80211_set_csa_beacon.
Fixes: c6da674aff94 ("{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh")
Signed-off-by: Hari Chandrakanthan <quic_haric@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/1658903549-21218-1-git-send-email-quic_haric@xxxxxxxxxxx
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
net/mac80211/cfg.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 9ca25ae503b0..37484c26259d 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3545,9 +3545,6 @@ static int ieee80211_set_csa_beacon(struct ieee80211_sub_if_data *sdata,
case NL80211_IFTYPE_MESH_POINT: {
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
- if (params->chandef.width != sdata->vif.bss_conf.chandef.width)
- return -EINVAL;
-
/* changes into another band are not supported */
if (sdata->vif.bss_conf.chandef.chan->band !=
params->chandef.chan->band)
--
2.35.1
